12,504 research outputs found
Recommended from our members
SLS Processing Studies of Nylon 11 Nanocomposites
Selective Laser Sintering (SLS) is widely used for rapid prototyping/manufacturing of
nylon 11 and nylon 12 parts. This processing technique has not been explored for
nylon nanocomposites. This study investigates the technicalities of processing nylon
11-clay and nylon-carbon nanofiber nanocomposites with SLS. Microstructural
analyses of the SLS powders and parts were conducted under SEM. Results suggest
that SLS processing is possible with the new nylon 11 nanocomposites. Yet the SLS
parts built have inferior properties relative to those of injection molding, suggesting
that more fine tuning for the processing is required.Mechanical Engineerin
Recommended from our members
Innovative Selective Laser Sintering Rapid Manufacturing using Nanotechnology
The objective of this research is to develop an improved nylon 11 (polyamide 11) polymer
with enhanced flame retardancy, thermal, and mechanical properties for selective laser sintering
(SLS) rapid manufacturing (RM). A nanophase was introduced into nylon 11 via twin screw
extrusion to provide improved material properties of the polymer blends. Atofina (now known
as Arkema) RILSAN® nylon 11 injection molding polymer pellets was used with three types of
nanoparticles: chemically modified montmorillonite (MMT) organoclays, nanosilica, and carbon
nanofibers (CNF) to create nylon 11 nanocomposites. Wide angle X-ray diffraction (WAXD)
and transmission electron microscopy (TEM) were used to determine the degree of dispersion.
Fifteen nylon 11 nanocomposites and control nylon 11 were fabricated by injection molding.
Flammability properties (using a cone calorimeter with a radiant flux of 50 kW/m2
) and
mechanical properties such as tensile strength and modulus, flexural modulus, elongation at
break were determined for the nylon 11 nanocomposites and compared with the baseline nylon
11. Based on flammability and mechanical material performance, five polymers including four
nylon 11 nanocomposites and a control nylon 11 were cryogenically ground into fine powders
for SLS RM. SLS specimens were fabricated for flammability, mechanical, and thermal
properties characterization. Nylon 11-CNF nanocomposites exhibited the best overall properties
for this study.Mechanical Engineerin
Transmission loss predictions for dissipative silencers of arbitrary cross section in the presence of mean flow
A numerical technique is developed for the analysis of dissipative silencers of arbitrary, but axially uniform, cross section. Mean gas flow is included in a central airway which is separated from a bulk reacting porous material by a concentric perforate screen. The analysis begins by employing the finite element method to extract the eigenvalues and associated eigenvectors for a silencer of infinite length. Point collocation is then used to match the expanded acoustic pressure and velocity fields in the silencer chamber to those in the inlet and outlet pipes. Transmission loss predictions are compared with experimental measurements taken for two automotive dissipative silencers with elliptical cross sections. Good agreement between prediction and experiment is observed both without mean flow and for a mean flow Mach number of 0.15. It is demonstrated also that the technique presented offers a considerable reduction in computational expenditure when compared to a three dimensional finite element analysis
Promotion of endometriosis in mice by polychlorinated dibenzo-p-dioxins, dibenzofurans, and biphenyls.
Previous studies showed exposure to 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) enhances the development of endometriotic lesions. In this study we examined the effects of other polyhalogenated aromatic hydrocarbons on endometriotic proliferation. B6C3F1 female mice were treated via oral gavage a total of five times, with 3 weeks between each dosing, with 0, 1, 3, or 10 micrograms 2,3,7,8,-TCDD/kg body weight (bw); 3 or 30 mg 2,2',4,4',5,5'-hexachlorobiphenyl (PCB 153)/kg bw; 100, 300, or 1000 micrograms 3,3',4,4',5-pentachlorobiphenyl (PCB 126)/kg bw; 10, 30, or 100 micrograms 2,3,4,7,8-pentachlorodibenzofuran (4-PeCDF)/kg bw; or 2 or 20 mg 1,3,6,8-TCDD/kg at 10 ml/kg bw. Endometriosis was surgically induced during the week of the second dosing. Three weeks following the final dose, the mice were euthanized and endometriotic lesions, whole body, liver, ovaries, uterine horn, and thymus were weighted, and lesion diameters were measured. Lesions, uterine horns, and ovaries were fixed for histopathology and livers were processed for measurement of ethoxyresorufin O-deethylase (EROD) activity. Both 2,3,7,8-TCDD (1 and 3 micrograms/kg bw) and 4-PeCDF (100 micrograms/kg bw) significantly enhanced the growth of endometrial lesions. No statistically significant increase in endometriotic lesion size was detected in animals treated with either PCB 126 or with the highest dose of 2,3,7,8-TCDD, possibly due to the effects of histologically observed ovarian toxicity. The nondioxin-like compounds, PCB 153 and 1,3,6,8-TCDD, produced no observable effects on endometriosis. Hepatic EROD activity was significantly induced by 2,3,7,8-TCDD, 4-PeCDF, and PCB 126, but not by PCB 153 or 1,3,6,8-TCDD. The results of this study provide preliminary support for the hypothesis that halogenated aromatic hydrocarbon-promoted endometriosis may be Ah receptor mediated
Direct glass bonded high specific power silicon solar cells for space applications
A lightweight, radiation hard, high performance, ultra-thin silicon solar cell is described that incorporates light trapping and a cover glass as an integral part of the device. The manufacturing feasibility of high specific power, radiation insensitive, thin silicon solar cells was demonstrated experimentally and with a model. Ultra-thin, light trapping structures were fabricated and the light trapping demonstrated experimentally. The design uses a micro-machined, grooved back surface to increase the optical path length by a factor of 20. This silicon solar cell will be highly tolerant to radiation because the base width is less than 25 microns making it insensitive to reduction in minority carrier lifetime. Since the silicon is bonded without silicone adhesives, this solar cell will also be insensitive to UV degradation. These solar cells are designed as a form, fit, and function replacement for existing state of the art silicon solar cells with the effect of simultaneously increasing specific power, power/area, and power supply life. Using a 3-mil thick cover glass and a 0.3 g/sq cm supporting Al honeycomb, a specific power for the solar cell plus cover glass and honeycomb of 80.2 W/Kg is projected. The development of this technology can result in a revolutionary improvement in high survivability silicon solar cell products for space with the potential to displace all existing solar cell technologies for single junction space applications
Evolution of an elliptical bubble in an accelerating extensional flow
Mathematical models that describe the dynamical behavior of a thin gas bubble embedded in a glass fiber during a fiber drawing process have been discussed and analyzed.
The starting point for the mathematical modeling was the equations presented in [1] for a glass fiber with a hole undergoing extensional flow. These equations were reconsidered here with the additional reduction that the hole, i.e. the gas bubble, was thin as compared to the radius of the fiber and of finite extent. The primary model considered was one in which the mass of the gas inside the bubble was fixed. This fixed-mass model involved equations for the axial velocity and fiber radius, and equations for the radius of the bubble and the gas pressure inside the bubble. The model equations assumed that the temperature of the furnace of the drawing tower was known.
The governing equations of the bubble are hyperbolic and predict that the bubble cannot extend beyond the limiting characteristics specified by the ends of the initial bubble shape. An analysis of pinch-off was performed, and it was found that pinch-off can occur, depending on the parameters of the model, due to surface tension when the bubble radius is small.
In order to determine the evolution of a bubble, a numerical method of solution was presented. The method was used to study the evolution of two different initial bubble shapes, one convex and the other non-convex. Both initial bubble shapes had fore-aft symmetry, and it was found that the bubbles stretched and elongated severely during the drawing process. For the convex shape, fore-aft symmetry was lost in the middle of the drawing process, but the symmetry was re-gained by the end of the drawing tower. A small amount of pinch-off was observed at each end for this case, so that the final bubble length was slightly shorter than its theoretical maximum length. For the non-convex initial shape, pinch-off occurred in the middle of the bubble resulting in two bubbles by the end of the fiber draw.
The two bubbles had different final pressures and did not have fore-aft symmetry.
An extension of the fixed-mass model was considered in which the gas in the bubble was allowed to diffuse into the surrounding glass. The governing equations for this leaky-mass model were developed and manipulated into a form suitable for a numerical treatment
Evaluation of movement and physiological demands of rugby league referees using global positioning systems tracking.
The use of global positioning systems (GPS) technology within referees of any sport is limited. Therefore, the purpose of the current study was to evaluate the movement and physiological demands of professional rugby league referees using GPS tracking analysis. Time-motion analysis was undertaken on 8 referees using 5-Hz GPS devices and heart rate monitors throughout a series of Super League matches. 44 data sets were obtained with results identifying similar total distance covered between first and second half periods with a significant (P=0.004) reduction in the number of high velocity efforts performed between 5.51-7.0 m.s-1 (1st=21±8, 2nd=18±8). Mean distance covered from greatest to least distance, was 3 717±432 m, 3 009±402 m, 1 411±231 m, 395±133 m and 120±97 m for the following 5 absolute velocity classifications, respectively; 0.51-2.0 m.s-1; 2.1-4.0 m.s-1: 4.01-5.5 m.s-1; 5.51-7.0 m.s-1; <7.01 m.s-1. Heart rate was significantly (P<0.001) greater in the first (85.5±3.4% maxHR) compared to the second (82.9±3.8% maxHR) half. This highlights the intermittent nature of rugby league refereeing, consisting of low velocity activity interspersed with high velocity efforts and frequent changes of velocity. Training should incorporate interval training interspersing high velocity efforts of varying distances with low velocity activity while trying to achieve average heart rates of ~ 84% maxHR to replicate the physiological demands
Addressing student models of energy loss in quantum tunnelling
We report on a multi-year, multi-institution study to investigate student
reasoning about energy in the context of quantum tunnelling. We use ungraded
surveys, graded examination questions, individual clinical interviews, and
multiple-choice exams to build a picture of the types of responses that
students typically give. We find that two descriptions of tunnelling through a
square barrier are particularly common. Students often state that tunnelling
particles lose energy while tunnelling. When sketching wave functions, students
also show a shift in the axis of oscillation, as if the height of the axis of
oscillation indicated the energy of the particle. We find inconsistencies
between students' conceptual, mathematical, and graphical models of quantum
tunnelling. As part of a curriculum in quantum physics, we have developed
instructional materials to help students develop a more robust and less
inconsistent picture of tunnelling, and present data suggesting that we have
succeeded in doing so.Comment: Originally submitted to the European Journal of Physics on 2005 Feb
10. Pages: 14. References: 11. Figures: 9. Tables: 1. Resubmitted May 18 with
revisions that include an appendix with the curriculum materials discussed in
the paper (4 page small group UW-style tutorial
- …