Control jet placement on spacecraft

For efficient operation and configuration design of multijet spacecraft control systems methods of linear programming are used to select combinations of individual jet-burn times which produce the desired impulses. Minimum-fuel and fuel-time solutions are found

Space shuttle post-entry and landing analysis. Volume 2: Appendices

Four candidate navigation systems for the space shuttle orbiter approach and landing phase are evaluated in detail. These include three conventional navaid systems and a single-station one-way Doppler system. In each case, a Kalman filter is assumed to be mechanized in the onboard computer, blending the navaid data with IMU and altimeter data. Filter state dimensions ranging from 6 to 24 are involved in the candidate systems. Comprehensive truth models with state dimensions ranging from 63 to 82 are formulated and used to generate detailed error budgets and sensitivity curves illustrating the effect of variations in the size of individual error sources on touchdown accuracy. The projected overall performance of each system is shown in the form of time histories of position and velocity error components

Space shuttle entry and landing navigation analysis

A navigation system for the entry phase of a Space Shuttle mission which is an aided-inertial system which uses a Kalman filter to mix IMU data with data derived from external navigation aids is evaluated. A drag pseudo-measurement used during radio blackout is treated as an additional external aid. A comprehensive truth model with 101 states is formulated and used to generate detailed error budgets at several significant time points -- end-of-blackout, start of final approach, over runway threshold, and touchdown. Sensitivity curves illustrating the effect of variations in the size of individual error sources on navigation accuracy are presented. The sensitivity of the navigation system performance to filter modifications is analyzed. The projected overall performance is shown in the form of time histories of position and velocity error components. The detailed results are summarized and interpreted, and suggestions are made concerning possible software improvements

Acute lung injury in paediatric intensive care: course and outcome

Introduction: Acute lung injury (ALI) and acute respiratory distress syndrome (ARDS) carry a high morbidity and mortality (10-90%). ALI is characterised by non-cardiogenic pulmonary oedema and refractory hypoxaemia of multifactorial aetiology [1]. There is limited data about outcome particularly in children. Methods This retrospective cohort study of 85 randomly selected patients with respiratory failure recruited from a prospectively collected database represents 7.1% of 1187 admissions. They include those treated with High Frequency Oscillation Ventilation (HFOV). The patients were admitted between 1 November 1998 and 31 October 2000. Results: Of the 85, 49 developed acute lung injury and 47 had ARDS. There were 26 males and 23 females with a median age and weight of 7.7 months (range 1 day-12.8 years) and 8 kg (range 0.8-40 kg). There were 7 deaths giving a crude mortality of 14.3%, all of which fulfilled the Consensus I [1] criteria for ARDS. Pulmonary occlusion pressures were not routinely measured. The A-a gradient and PaO2/FiO2 ratio (median + [95% CI]) were 37.46 [31.82-43.1] kPa and 19.12 [15.26-22.98] kPa respectively. The non-survivors had a significantly lower PaO2/FiO2 ratio (13 [6.07-19.93] kPa) compared to survivors (23.85 [19.57-28.13] kPa) (P = 0.03) and had a higher A-a gradient (51.05 [35.68-66.42] kPa) compared to survivors (36.07 [30.2-41.94]) kPa though not significant (P = 0.06). Twenty-nine patients (59.2%) were oscillated (Sensormedics 3100A) including all 7 non-survivors. There was no difference in ventilation requirements for CMV prior to oscillation. Seventeen of the 49 (34.7%) were treated with Nitric Oxide including 5 out of 7 non-survivors (71.4%). The median (95% CI) number of failed organs was 3 (1.96-4.04) for non-survivors compared to 1 (0.62-1.62) for survivors (P = 0.03). There were 27 patients with isolated respiratory failure all of whom survived. Six (85.7%) of the non-survivors also required cardiovascular support.Conclusion: A crude mortality of 14.3% compares favourably to published data. The A-a gradient and PaO2/FiO2 ratio may be of help in morbidity scoring in paediatric ARDS. Use of Nitric Oxide and HFOV is associated with increased mortality, which probably relates to the severity of disease. Multiple organ failure particularly respiratory and cardiac disease is associated with increased mortality. ARDS with isolated respiratory failure carries a good prognosis in children

The 3D structure of the Lagrangian acceleration in turbulent flows

We report experimental results on the three dimensional Lagrangian acceleration in highly turbulent flows. Tracer particles are tracked optically using four silicon strip detectors from high energy physics that provide high temporal and spatial resolution. The components of the acceleration are shown to be statistically dependent. The probability density function (PDF) of the acceleration magnitude is comparable to a log-normal distribution. Assuming isotropy, a log-normal distribution of the magnitude can account for the observed dependency of the components. The time dynamics of the acceleration components is found to be typical of the dissipation scales whereas the magnitude evolves over longer times, possibly close to the integral time scale.Comment: accepted for publication in Physical Review Letter

Hypervelocity impact facility for simulating materials exposure to impact by space debris

As a result of man's venturing into space, the local debris contributed by his presence exceeds, at some orbital altitudes, that of the natural component. Man's contribution ranges from fuel residue to large derelect satellites that weigh many kilograms. Current debris models are able to predict the growth of the problem and suggest that spacecraft must employ armor or bumper shields for some orbital altitudes now, and that, the problem will become worse as a function of time. The practical upper limit to the velocity distribution is on the order of 40 km/s and is associated with the natural environment. The maximum velocity of the man-made component is in the 14-16 km/s range. The Long Duration Exposure Facility (LDEF) has verified that the 'high probability of impact' particles are in the microgram to milligram range. These particles can have significant effects on coatings, insulators, and thin metallic layers. The surface of thick materials becomes pitted and the local debris component is enhanced by ejecta from the debris spectrum in a controlled environment. The facility capability is discussed in terms of drive geometry, energetics, velocity distribution, diagnostics, and projectile/debris loading. The facility is currently being used to study impact phenomena on Space Station Freedom's solar array structure, other solar array materials, potential structural materials for use in the station, electrical breakdown in the space environment, and as a means of clarifying or duplicating the impact phenomena on the LDEF surfaces. The results of these experiments are described in terms of the mass/velocity distribution incident on selected samples, crater dynamics, and sample geometry

Short-term PsychoEducation for Carers To Reduce Over Medication of people with intellectual disabilities (SPECTROM): study protocol

Introduction Psychotropic medications that are primarily licenced for the treatment of psychiatric disorders are used widely (32%–85%) among people with intellectual disabilities (ID) often for the management of problem (challenging) behaviour in the absence of a psychiatric disorder. Care staff play a pivotal role in the prescribing process. Currently, no staff training programme exists to address the issue of overprescribing of psychotropic medication in people with ID, thus highlighting an urgent need for developing a psychoeducational programme (PEP) specifically designed to address this issue. We propose to develop a PEP for care staff using the methodology described in the UK Medical Research Council guide for complex interventions. Methods and analysis The development of the PEP will involve (1) gathering information on available relevant training programmes, (2) running four focus groups with care staff and other professionals to establish the content and format of the PEP, and (3) organising a co-design event involving all relevant stakeholders to discuss the format of the PEP. A core project team will develop the PEP under guidance from the PEP Development Group which will consist of 10–12 relevant stakeholder representatives. Feedback from selected stakeholders on a draft PEP will allow us to refine the PEP before implementation. The PEP will have web-based modules supplemented by face to face training sessions. When the final draft is ready, we will field test the PEP on six to eight care staff from community care homes for people with ID. After completing the field test, we will run a focus group involving participants in the PEP to get feedback on the PEP. Ethics and dissemination Ethics approval for this study was waived by the UK Health Regulatory Authority as the study does not collect any patient related information and only include care staff outside the UK NHS. This will be the first ever such universally freely available PEP supported by training manual and slides

An interdisciplinary approach to brand association research

Purpose. This paper discusses the current role of qualitative research in the analysis of the relations between brands and consumers in new market spaces, with particular reference to how it can be enhanced with quantitative techniques to study interactions in online communities. Design/methodology/approach. The paper reviews key scientific contributions in the area of qualitative marketing research. Drawing from this theoretical background, the authors then propose the integration of digital ethnography (a qualitative approach) with quantitative text mining as an innovative approach to gain insights into perceptions of brand associations among online consumers. Findings. The paper contributes to a greater awareness of both limitations and new perspectives in relation to qualitative market research, while suggesting innovative paths for future research. Practical implications. The new methodological approach described can be used to better understand brand knowledge based on consumer brand associations. These insights can then be applied towards developing and implementing effective branding strategies. Originality/Value. The authors propose an interdisciplinary methodology to study consumer behaviour in online communities which incorporates digital ethnography and computer-assisted textual analysis. Particularly the latter technique (borrowed from the field of linguistics) has not yet been exploited extensively in marketing research, but is capable of offering new types of knowledge with important implications for strategic brand management

Searching for onset of deconfinement via hypernuclei and baryon-strangeness correlations

We argue that the ratio $S_3 =\mathrm{^3_\Lambda H} / (\mathrm{^3He} \times \frac{\Lambda}{p})$ is a good representation of the local correlation between baryon number and strangeness, and therefore is a valuable tool to probe the nature of the dense matter created in high energy heavy-ion collision: quark gluon plasma or hadron gas. A multiphase transport model (AMPT) plus a dynamical coalescence model is used to elucidate our arguments. We find that AMPT with string melting predicts an increase of $S_3$ with increasing beam energy, and is consistent with experimental data, while AMPT with only hadronic scattering results in a low $S_3$ throughout the energy range from AGS to RHIC, and fails to describe the experimental data.Comment: add several sentences in paragraph 2 and 3, one more paragraph (4) and one more reference (11) to address the referee's queries. accepted versio

Chandra imaging of the X-ray core of Abell 1795

We report the discovery of a 40 arcsec long X-ray filament in the core of the cluster of galaxies A1795. The feature coincides with an Halpha+NII filament found by Cowie et al in the early 1980s and resolved into at least 2 U-band filaments by McNamara et al in the mid 1990s. The (emission-weighted) temperature of the X-ray emitting gas along the filament is 2.5-3 keV, as revealed by X-ray colour ratios. The deprojected temperature will be less. A detailed temperature map of the core of the cluster presented. The cD galaxy at the head of the filament is probably moving through or oscillating in the cluster core. The radiative cooling time of the X-ray emitting gas in the filament is about 3x10^8 yr which is similar to the age of the filament obtained from its length and velocity. This suggests that the filament is produced by cooling of the gas from the intracluster medium. The filament, much of which is well separated from the body of the cD galaxy and its radio source, is potentially of great importance in helping to understand the energy and ionization source of the optical nebulosity common in cooling flows.Comment: 5 pages, 5 figures, accepted by MNRAS, high resolution version available at http://www-xray.ast.cam.ac.uk/papers/a1795_chandra.pd