Mandibular morphometric analysis in open bite early treatment relapse subjects: a retrospective observational pilot study

Background: The purpose of this retrospective study was to evaluate the mandibular shape differences between a group of success and a group of failure Anterior Open Bite (AOB) malocclusion early orthodontic treatment in growing subjects, in order to identify mandibular features of relapse. Methods: Twenty three patients (7 males, 16 females, 9.3 years ±1,5 years) were enrolled from the Department of Orthodontics at the University of Rome Tor Vergata. Inclusion criteria were: white ancestry, overbite < 0 mm, mixed dentition phase, end-to-end or Class I molar relationship, first skeletal class assessed on lateral cephalograms (0° < ANB < 4°), cervical skeletal maturation CS1-CS2, no previous orthodontic treatment, no congenital diseases. Pre-treatment (T1) lateral cephalograms were acquired. Each patient underwent early orthodontic treatment with Rapid Maxillary Expander (RME) and Bite Block (BB) or Quad-Helix Crib (QHC) until open bite correction. Radiographic records were recollected at T2 (permanent dentition, skeletal cervical maturation CS3-CS4). Mean interval time T2-T1 was 4.2 years ±6 months. According to treatment stability, a Relapse Group (RG 11 patients, 3 M, 8F; 13.7 years ±8 months, 7 subjects treated with RME/BB, 4 with QH/C) and a Success Group (SG, 12 patients, 4 M, 8F; 13.4 ± 10 months, 7 subjects treated with QH/C, 5 with RME/BB) were identified. On the lateral radiographs the mandibular length (Co-Gn), the inferior gonial angle (NGo^GoMe) and the antegonial notch depth (AND) were analyzed. Then the mandibular Geometric Morphometric analysis (GMM) was applied. Intergroup statistically significant differences were found using student's t-tests. Procrustes analysis and principal component analysis (PCA) were performed for the GMM. Results: At T1 no statistically significant differences were found between RG and SG, however higher values of antegonial notch depth were found in RG. T2-T1 comparison showed in RG statistically significant increases in Co-Gn (p = 0.04), NGo^GoMe angle (p = 0.01) and antegonial notch depth (p = 0,04). PC1 confirmed the increase in the antegonial notch depth in RG when compared to SG at T2. Conclusions: The increased antegonial notch depth associated with the increased mandibular length and the increased gonial angle could be responsible of relapse of early orthodontic treatment in open bite growing subjects

Measuring 3D shape in orthodontics through geometric morphometrics

Abstract Background Geometric morphometrics (GMM) has been traditionally applied to the field of biology to study developmental differentiations between species. Orthodontics deals with the shape and size of the face and its components. While several tools have been used to measure size, proportions, and relations between anatomical components, shape has been mainly described by esthetic criteria. The purpose of this paper is to present methods to measure shape of 3D orthodontic data, beyond the conventional tools that have been traditionally used in cephalometrics and in facial and dental cast analysis. Findings The authors showcase an example of applying geometric morphometrics to measure palates from scanned dental casts. GMM can be used as a useful tool to describe the three-dimensional shape of surfaces of orthodontic interest. A general introduction to the theoretical principles of how to apply GMM is provided. Conclusions Variability can be measured through the Principal Component Analysis (PCA) and can lead to the identification of shape patterns and sources of variability of the shape, independently from changes in size

Evaluation of the correlation between dental occlusion and posture using a force platform

OBJECTIVES: Force platforms are widely used to evaluate the relationship between posture and dental occlusion. This study evaluated whether force platforms are able to detect eventual postural modifications resulting from dental occlusion. METHOD: A total of 44 healthy volunteers who were given no information on the aim of the study underwent six postural stabilometric exams under different mandibular and visual conditions. Four parameters were considered: sway area, sway velocity, X axis displacement of the center of the foot pressure and Y axis displacement of the center of the foot pressure. RESULTS: An analysis of variance (ANOVA) revealed the relative influence of each factor; specifically, the ocular afference significantly influenced the sway area and sway velocity parameters, and the mandibular position had only aweakinfluence on theswayareaparameter. CONCLUSIONS: Vision was shown to influence body posture, and a weak correlation was observed between mandibular position and body posture in healthy subjects. However, the force platform is most likely not able to clearly detect this relationship. Gnathologists must use caution when using force platform analysis to modify a therapeutic plan. The sway area seems to be the most sensitive parameter for evaluating the effect of occlusion on body posture

Low-dose CT protocol for orthodontic diagnosis.

AIM: This was to correlate the dosimetric evaluation with high diagnostic accuracy by suggesting a protocol that significantly reduces the dose administered by a Dentascan exam without affecting diagnostic accuracy. MATERIALS AND METHODS: 17 patients were selected consecutively (7 males and 10 females) of a mean age of 11.2 (8-14 years) who sought orthodontic treatment. They needed CT control before and after treatment with RME to evaluate impacted canines. The study was performed using a multidetector 16-rows CT with two protocols that provided 2 different KV acquisition parameters: 80 KV or 120 KV. Radiation dose was evaluated in two ways: CTDI and DLP. Image quality was rated and the results were compared to identify significant differences in terms of image quality, radiation exposure and presence of artefacts. RESULTS: The 80 KV scanning has a significantly lower effective radiation dose compared to the 120 KV scanning (p <0.05). The images of all patients were used for comparing the protocols in terms of image quality. The mean scores for the 80 KV scanning images were 4.18 +/-0.81 and 4.41 +/-0.80 for dose obtained by 120 KV scanning. The median image quality was 4 (good) for both protocols. The 80 KV protocol allowed, as well as the 120 KV, a careful analysis by the orthodontist and the dental surgeon that together, based on this images, can choose the best line of treatment between several available options. CONCLUSION: 80 KV protocols compared with 120 KV protocols resulted in reduced total radiation dose without relevant loss of diagnostic image information and quality. The images were good enough to obtain information about the exact position of impacted teeth and to plan the best line of surgical treatment and mechanotherapy strategy

Early treatment of Class III malocclusion with RME and facial mask: evaluation of dentoalveolar effects on digital dental casts

Aim: To analyse the dental effects on digital dental casts in subjects with Class III malocclusion treated with bonded Rapid Maxillary Expansion and Facial Mask (RME/FM). Materials and methods: A study group sample (SG) of 29 subjects (13 females and 16 males) and mean age of 7.4 years (SD 1.2 years) was selected. A bonded RME was placed and activated 1/4 of a turn per day until overcorrection of the transverse width. At the end of expansion, patients were given FMs and treated at least to a positive overjet. The SG was compared with a control group (CG) of 21 prepubertal subjects (9 females; 12 males) presenting with normal occlusion and mean age of 7.9 years (SD 1.6 years). For each subject of the SG and CG initial (pretreatment, T1) and final (post-treatment, T2) digital dental casts were available. Significant in between-group differences were tested with the Student's t-test. Results: The transverse dimension of the upper arch was significantly greater in SG vs. CG (IMAW: +2.6 mm; ICAW: +3.1 mm). Anterior arch length and arch depth were significantly smaller in SG when compared with CG (AAL: -3.2 mm, AD: -3.4 mm) at the end of therapy. Conclusion: The orthopaedic treatment with bonded RME/FM produced in subjects treated in the deciduous or early mixed dentition a significant expansion of the maxillary arch and mesialisation of the posterior teeth with a reduction of the arch depth

Evaluation of the correlation between dental occlusion and posture using a force platform

OBJECTIVES: Force platforms are widely used to evaluate the relationship between posture and dental occlusion. This study evaluated whether force platforms are able to detect eventual postural modifications resulting from dental occlusion. METHOD: A total of 44 healthy volunteers who were given no information on the aim of the study underwent six postural stabilometric exams under different mandibular and visual conditions. Four parameters were considered: sway area, sway velocity, X axis displacement of the center of the foot pressure and Y axis displacement of the center of the foot pressure. RESULTS: An analysis of variance (ANOVA) revealed the relative influence of each factor; specifically, the ocular afference significantly influenced the sway area and sway velocity parameters, and the mandibular position had only aweakinfluence on theswayareaparameter. CONCLUSIONS: Vision was shown to influence body posture, and a weak correlation was observed between mandibular position and body posture in healthy subjects. However, the force platform is most likely not able to clearly detect this relationship. Gnathologists must use caution when using force platform analysis to modify a therapeutic plan. The sway area seems to be the most sensitive parameter for evaluating the effect of occlusion on body posture

Palatal vault morphometric analysis of the effects of two early orthodontic treatments in anterior open bite growing subjects: a controlled clinical study

Abstract Background The purpose of this study was to evaluate the palatal morphological changes in Anterior Open Bite (AOB) pre-pubertal subjects treated with Rapid Maxillary Expansion and Bite-Block (RME/BB) or Quad Helix with crib (QH/C) when compared with a Control Group (CG) by using Geometric Morphometric Analysis (GMM). Methods AOB group (AOBG) included 30 subjects (20 females, 10 males, mean age 8.1 ± 0.8ys) with dentoskeletal AOB. AOBG was divided in two subgroups according to the treatment strategy: RME/BB group (RME/BBg) included 15 subjects (10 females, 5 males, QH/C group (QH/Cg) comprised 15 subjects (10 females, 5 males). The two subgroups were compared with a CG of 15 subjects (10 females, 5 males) matched for sex, age, vertical pattern, and observation period. Digital upper dental casts were collected before treatment (T1) and at the end of the active treatment (T2). Landmarks and semilandmarks were digitized on dental casts and GMM was applied. Procrustes analysis and principal component analysis (PCA) were performed. Results At T2, RME/BBg when compared with QH/Cg evidenced no statistically significant differences. Instead, RME/BBg showed an increased maxillary transverse dimension and a decreased palatal depth when compared with CG. The comparison QH/Cg vs. CG demonstrated a slight transversal maxillary expansion. Conclusions RME/BBg showed significant changes in the transversal and vertical dimensions with a clear maxillary expansion and a decrease of the palatal depth when compared with QH/Cg and CG. QH/Cg showed a significant slight maxillary expansion and no variation in vertical and sagittal planes when compared with CG