14 research outputs found
Taming the Heat Flux Problem: Advanced Divertors Towards Fusion Power
The next generation fusion machines are likely to face enormous heat exhaust problems. In addition to summarizing major issues and physical processes connected with these problems, we discuss how advanced divertors, obtained by modifying the local geometry, may yield workable solutions. We also point out that: (1) the initial interpretation of recent experiments show that the advantages, predicted, for instance, for the X-divertor (in particular, being able to run a detached operation at high pedestal pressure) correlate very well with observations, and (2) the X-D geometry could be implemented on ITER (and DEMOS) respecting all the relevant constraints. A roadmap for future research efforts is proposed
Results from recent detachment experiments in alternative divertor configurations on TCV
Divertor detachment is explored on the TCV tokamak in alternative magnetic geometries. Starting from typical TCV single-null shapes, the poloidal flux expansion at the outer strikepoint is varied by a factor of 10 to investigate the X-divertor characteristics, and the total flux expansion is varied by 70% to study the properties of the super-X divertor. The effect of an additional X-point near the target is investigated in X-point target divertors. Detachment of the outer target is studied in these plasmas during Ohmic density ramps and with the ion âB drift away from the primary X-point. The detachment threshold, depth of detachment, and the stability of the radiation location are investigated using target measurements from the wall-embedded Langmuir probes and two-dimensional CIII line emissivity profiles across the divertor region, obtained from inverted, toroidally-integrated camera data. It is found that increasing poloidal flux expansion results in a deeper detachment for a given line-averaged density and a reduction in the radiation location sensitivity to core density, while no large effect on the detachment threshold is observed. The total flux expansion, contrary to expectations, does not show a significant influence on any detachment characteristics in these experiments. In X-point target geometries, no evidence is found for a reduced detachment threshold despite a 2-3 fold increase in connection length. A reduced radiation location sensitivity to core plasma density in the vicinity of the target X-point is suggested by the measurements
Modeling non-axisymmetry in the DIII-D small angle slot divertor using EMC3-EIRENE
The 3D edge transport code EMC3-EIRENE is used to evaluate the effects of non-axisymmetric misalignment of the small angle slot (SAS) divertor on DIII-D. The SAS is a slot divertor with a close-fitting baffle designed to control neutral recycling to yield a wide region of low electron temperature across the divertor near the strike point and to achieve mitigated heat flux to the divertor at a lower upstream plasma density as compared to a more open geometry. The measured misalignment is simulated as an nâŻ=âŻ1 sinusoidal offset in major radius of magnitude 5.1âŻmm, resulting in toroidally varying divertor conditions where local regions of high and low fluxes and a changing level of detachment can be supported. The trends can be understood in terms of the local incident angle of the magnetic field, the volume of the private flux plasma in the slot, and the energy losses along the field lines in the slot. The misaligned SAS is globally more attached and has a lower plasma density and particle flux than an axisymmetric solution. Computational grids limited to the radial extent of the slot result in artificially detached solutions unless the cross-field transport coefficients are reduced such that the heat flux width is smaller than the grid width
Numerical exploration of non-axisymmetric divertor closure in the small angle slot (SAS) divertor at DIII-D
Numerical exploration of non-axisymmetric divertor closure in the small angle slot (SAS) divertor at DIII-D
Taming the Heat Flux Problem: Advanced Divertors Towards Fusion Power
The next generation fusion machines are likely to face enormous heat exhaust problems. In addition to summarizing major issues and physical processes connected with these problems, we discuss how advanced divertors, obtained by modifying the local geometry, may yield workable solutions. We also point out that: (1) the initial interpretation of recent experiments show that the advantages, predicted, for instance, for the X-divertor (in particular, being able to run a detached operation at high pedestal pressure) correlate very well with observations, and (2) the X-D geometry could be implemented on ITER (and DEMOS) respecting all the relevant constraints. A roadmap for future research efforts is proposed
Numerical exploration of non-axisymmetric divertor closure in the small angle slot (SAS) divertor at DIII-D
Fusion Nuclear Science Facilities and Pilot Plants Based on the Spherical Tokamak
A Fusion Nuclear Science Facility (FNSF) could play an important role in the development of fusion energy by providing the nuclear environment needed to develop fusion materials and components. The spherical torus/tokamak (ST) is a leading candidate for an FNSF due to its potentially high neutron wall loading and modular configuration. A key consideration for the choice of FNSF configuration is the range of achievable missions as a function of device size. Possible missions include: providing high neutron wall loading and fluence, demonstrating tritium self-sufficiency, and demonstrating electrical self-sufficiency. All of these missions must also be compatible with a viable divertor, first-wall, and blanket solution. ST-FNSF configurations have been developed simultaneously incorporating for the first time: (1) a blanket system capable of tritium breeding ratio TBR approximately 1, (2) a poloidal field coil set supporting high elongation and triangularity for a range of internal inductance and normalized beta values consistent with NSTX/NSTX-U previous/planned operation, (3) a long-legged divertor analogous to the MAST-U divertor which substantially reduces projected peak divertor heat-flux and has all outboard poloidal field coils outside the vacuum chamber and superconducting to reduce power consumption, and (4) a vertical maintenance scheme in which blanket structures and the centerstack can be removed independently. Progress in these ST-FNSF missions vs. configuration studies including dependence on plasma major radius R0 for a range 1m to 2.2m are described. In particular, it is found the threshold major radius for TBR = 1 is R0 greater than or equal to 1.7m, and a smaller R0=1m ST device has TBR approximately 0.9 which is below unity but substantially reduces T consumption relative to not breeding. Calculations of neutral beam heating and current drive for non-inductive ramp-up and sustainment are described. An A=2, R0=3m device incorporating high-temperature superconductor toroidal field coil magnets capable of high neutron fluence and both tritium and electrical self-sufficiency is also presented following systematic aspect ratio studies.readme, data file