7,550 research outputs found
A Data Exchange Standard for Optical (Visible/IR) Interferometry
This paper describes the OI Exchange Format, a standard for exchanging
calibrated data from optical (visible/infrared) stellar interferometers. The
standard is based on the Flexible Image Transport System (FITS), and supports
storage of the optical interferometric observables including squared visibility
and closure phase -- data products not included in radio interferometry
standards such as UV-FITS. The format has already gained the support of most
currently-operating optical interferometer projects, including COAST, NPOI,
IOTA, CHARA, VLTI, PTI, and the Keck Interferometer, and is endorsed by the IAU
Working Group on Optical Interferometry. Software is available for reading,
writing and merging OI Exchange Format files.Comment: 26 pages, 1 figur
Probing Fine-Scale Ionospheric Structure with the Very Large Array Radio Telescope
High resolution (~1 arcminute) astronomical imaging at low frequency (below
150 MHz) has only recently become practical with the development of new
calibration algorithms for removing ionospheric distortions. In addition to
opening a new window in observational astronomy, the process of calibrating the
ionospheric distortions also probes ionospheric structure in an unprecedented
way. Here we explore one aspect of this new type of ionospheric measurement,
the differential refraction of celestial source pairs as a function of their
angular separation. This measurement probes variations in the spatial gradient
of the line-of-sight total electron content (TEC) to 0.001 TECU/km accuracy
over spatial scales of under 10 km to over 100 km. We use data from the VLA
Low-frequency Sky Survey (VLSS; Cohen et al. 2007, AJ 134, 1245), a nearly
complete 74 MHz survey of the entire sky visible to the Very Large Array (VLA)
telescope in Socorro, New Mexico. These data comprise over 500 hours of
observations, all calibrated in a standard way. While ionospheric spatial
structure varies greatly from one observation to the next, when analyzed over
hundreds of hours, statistical patterns become apparent. We present a detailed
characterization of how the median differential refraction depends on source
pair separation, elevation and time of day. We find that elevation effects are
large, but geometrically predictable and can be "removed" analytically using a
"thin-shell" model of the ionosphere. We find significantly greater ionospheric
spatial variations during the day than at night. These diurnal variations
appear to affect the larger angular scales to a greater degree indicating that
they come from disturbances on relatively larger spatial scales (100s of km,
rather than 10s of km).Comment: Accepted for publication by The Astronomical Journa
OA14.01. Relaxation-induced anxiety: predictors and subjective explanations among young adults
Species sensitivity of zeolite minerals for uptake of mercury solutes
The uptake of inorganic Hg2+ and organometallic CH3Hg+ from aqueous solutions by 11 different natural zeolites has been investigated using a batch distribution coefficient (Kd) method and supported by a preliminary voltammetric study. The effect of mercury concentration on theKd response is shown over an environmentally appropriate concentration range of 0.1-5 ppm inorganic and organometallic Hg using a batch factor of 100 ml gâ1 and 20 h equilibration. Analcime and a Na-chabazite displayed the greatest methylmercury uptakes (Kd values at 1.5 ppm of 4023 and 3456, respectively), with mordenite as the smallest at 578. All uptake responses were greater for methylmercury than for the inorganic mercuric nitrate solutions, suggesting a distinctive sensitivity of zeolites to reaction with different types of solute species. It is likely that this sensitivity is attributable to the precise nature of the resultant Hg-zeolite bonds. Additionally, both the Si-Al ratio and the Na content of the initial natural zeolite samples are shown to influence the Kd responses, with positive correlations between Kd and Na content for all zeolites excluding mordenite
Patches in a side-by-side configuration: a description of the flow and deposition fields
In the last few decades, a lot of research attention has been paid to flow-vegetation interactions. Starting with the description of the flow field around uniform macrophyte stands, research has evolved more recently to the description of flow fields around individual, distinct patches. However, in the field, vegetation patches almost never occur in isolation. As such, patches will influence each other during their development and interacting, complex flow fields can be expected.
In this study, two emergent patches of the same diameter (D = 22 cm) and a solid volume fraction of 10% were placed in a side-by-side configuration in a lab flume. The patches were built as an array of wooden cylinders, and the distance between the patches (gap width Delta) was varied between Delta = 0 and 14 cm. Flow measurements were performed by a 3D Vectrino Velocimeter (Nortek AS) at mid-depth of the flow. Deposition experiments of suspended solids were performed for selected gap widths.
Directly behind each patch, the wake evolved in a manner identical to that of a single, isolated patch. On the centerline between the patches, the maximum velocity U-max was found to be independent of the gap width Delta. However, the length over which this maximum velocity persists, the potential core L-j, increased linearly as the gap width increased. After the merging of the wakes, the centerline velocity reaches a minimum value U-min. The minimum centerline velocity decreased in magnitude as the gap width decreased. The velocity pattern within the wake is reflected in the deposition patterns. An erosion zone occurs on the centerline between the patches, where the velocity is elevated. Deposition occurs in the low velocity zones directly behind each patch and also downstream of the patches, along the centerline between the patches at the point of local velocity minimum. This downstream deposition zone, a result of the interaction of neighbouring patch wakes, may facilitate the establishment of new vegetation, which may eventually inhibit flow between the upstream patches and facilitate patch merger
Simultaneous inversion of source spectra, attenuation parameters and site responses. Application to the data of the French Accelerometric Network.
International audienceDisplacement spectra of earthquakes recorded by the French accelerometric network at regional scale are modeled as the product of source, propagation (including geometric and anelastic attenuation), and site effects. We use an iterative GaussâNewton inversion to solve the nonlinear problem and retrieve these different terms. This method is easy to implement because the partial derivatives of the amplitude spectrum with respect to the different parameters have simple analytic forms. After convergence, we linearize the problem around the solution to compute the correlation matrix, which allows us to identify the parameters which are poorly resolved. We analyze data from two tectonically active regions: the Alps and the Pyrenees. Eighty-three earthquakes with local magnitudes between 3.0 and 5.3 are analyzed, with epicentral distances in the range 15â200 km. S-wave displacement spectra are computed using a fast Fourier transform and integration in the 0.5â15-Hz frequency domain. We assume a Brune-type source, with a geometric attenuation of the form R-{gamma}, {gamma} being constant, and a frequency-dependent quality factor of the form Q=Q0xf{alpha}. The results reveal that the attenuation parameters are correlated to each other and to the seismic moments. The two regions have different attenuation patterns. The geometrical spreading factor is equal to 1 for the Alps and 1.2 for the Pyrenees. The anelastic attenuation exhibits low Q0 values (322 and 376 for the Alps and the Pyrenees, respectively) with regional variations for {alpha} (0.21 in the Alps and 0.46 in the Pyrenees). Computed moment magnitudes are generally 0.5 unit smaller than local magnitudes, and the logarithms of the corner frequencies decrease linearly with magnitude according to log10(fc)=1.72-0.32xMw. Stress drops range from 105 to 107 Pa (i.e., 1â100 bars), with a slight dependence to magnitude (large stress drops for large magnitudes). Finally, robust site responses relative to an average rock-site response are derived, allowing us to identify good reference rock sites
Visualizing, rather than deriving Russell-Saunders terms : a classroom activity with quantum numbers
A one hour classroom activity is presented, aimed at consolidating the concepts of microstates and Russell-Saunders energy terms in transition metal atoms and coordination complexes. The unconventional approach, based on logic and intuition rather than rigorous mathematics, is designed to stimulate discussion and enhance familiarity with quantum numbers in classes of Chemistry undergraduate students
Induction of Parturition in Beef Cattle With Dexamethasone
In recent years many reports have shown that synthetic glucocorticoids such as dexamethasone (DXMS) and flumethasone will induce parturition in cattle when injected intramuscularly during various stages of gestation. A study was conducted at South Dakota State University to determine, under field conditions, the effectiveness of DXMS coupled with estradiol on the precision of parturition induction, the incidence of retained placentas and subsequent reproductive performance of beef cows
- âŠ