Preparation and characterization of electrolytic alumina deposit on austenitic stainless steel

Conversion coating modified by alumina has been studied as a way for improving the resistance to thermal oxidation of an austenitic stainless steel. Conversion coating, characterized by a particular morphology and strong interfacial adhesion with the substrate, facilitate the electrochemical deposition of ceramic layers and enhance their adhesion to the substrate. The influence of the current density and treatment time on alumina deposit was studied using statistical experimental designs like Doehlert uniform shell design. After heating, coatings present a continuous composition gradient with refractory compounds at the surface. The behavior at high temperature (1000 8C) of the alumina coating was investigated. The presence of alumina increases the oxidation resistance of an austenitic stainless steel at 1000 8C. The morphology and the chemical composition of the deposit are analyzed. Results on the thermal stability of coating on austenitic stainless steel are presented

Chemical Evolution of the Galactic Bulge as Derived from High-Resolution Infrared Spectroscopy of K and M Red Giants

We present chemical abundances in K and M red-giant members of the Galactic bulge derived from high-resolution infrared spectra obtained with the Phoenix spectrograph on Gemini-South. The elements studied are carbon, nitrogen, oxygen, sodium, titanium, and iron. The evolution of C and N abundances in the studied red-giants show that their oxygen abundances represent the original values with which the stars were born. Oxygen is a superior element for probing the timescale of bulge chemical enrichment via [O/Fe] versus [Fe/H]. The [O/Fe]-[Fe/H] relation in the bulge does not follow the disk relation, with [O/Fe] values falling above those of the disk. Titanium also behaves similarly to oxygen with respect to iron. Based on these elevated values of [O/Fe] and [Ti/Fe] extending to large Fe abundances, it is suggested that the bulge underwent a more rapid chemical enrichment than the halo. In addition, there are declines in both [O/Fe] and [Ti/Fe] in those bulge targets with the largest Fe abundances, signifying another source affecting chemical evolution: perhaps Supernovae of Type Ia. Sodium abundances increase dramatically in the bulge with increasing metallicity, possibly reflecting the metallicity dependant yields from supernovae of Type II, although Na contamination from H-burning in intermediate mass stars cannot be ruled out.Comment: ApJ in pres

Oxydation humide des polluants organiques par l'oxygène moléculaire activée par le couple H²O²/Fe²+: Optimisation des paramètres opératoires

L'oxydation humide par l'oxygène moléculaire (procédé WAO) activée par le couple (H202/Fe2+) a été mise en oeuvre pour l'oxydation de la pollution organique aqueuse à travers deux composés modèles: l'acide succinique, normalement oxydable, et l'acide acétique, réputé réfractaire. L'influence des différents facteurs a été étudiée par la planification d'expériences. Après leur recensement, une étape préliminaire de criblage a été menée à bien en utilisant une matrice de Plackett et Burman. Seuls les paramètres les plus influents ont été gardés pour l'étape ultérieure d'établissement de modèles prévisionnels à partir d'une matrice composite centrée orthogonale. Les modèles établis ont été validés et ont permis de déterminer les conditions optimales de fonctionnement. L'effet de la température fait apparaître un optimum, à environ 200 °C, au-delà duquel la décomposition du peroxyde devient trop rapide. L'effet de la quantité de peroxyde d'hydrogène introduit est déterminant et l'ajout de moins de 20 % de la quantité stoechiomé- trique permet d'obtenir à 200 °C, avec environ 10 ppm de sels de fer, une efficacité de traitement d'environ 70% pour un composé normalement oxydable. Dans des conditions analogues, le procédé conventionnel sans promoteur conduit à une efficacité inférieure à 5 %.Wet air oxidation (WAO) is a liquid phase oxidation process using molecular oxygen at high temperature (250-300°C) and high pressure (50-150 bar). It can help treating toxic organic aqueous wastes from chemical industries with efficiencies up to 98% after 1 hour. The process can also help treating sludges from domestic sewage treatment facilities. It is usually very cost effective because of the very high operating pressure.This paper deals with the promoted wet air oxidation of acetic acid, rnodel compound for refractory wastes, and succinic acid, model for readily oxidized wastes. The study was conducted in order to determine the promoting effect when adding small dosages of hydrogen peroxide (with iron salts) during oxidation by molecular oxygen. It was previously shown that the initiating step is very temperature dependent (Reaction I) and limits the overall oxidation process The addition of small amounts of H2O2/Fe2+ (Fenton's reagent) can promote the forrnation of very reactive OH• radicals able to develop R• radicals (Reaction IV), even at a low temperature. Then, the oxidation (Reactions VI and VII) continues using molecular oxygen, but the peroxide should be added continuously during a batch test in order to maintain the initiating step.An optimal design methodology was used in order to assess the dependency of the oxidation effrciency on the various parameters and mainly on the promotors. At frrst, a Plackett and Burman design of experiments (PE1) was used to screen the most important variables among those likely to have an effect. The design of experiments, the conditions of the runs and the results (tables 1 to 3) allowed the determination of a new experimental domain and the selection of the four most important variables for the further design of experiments. At the same time, the effect of an addition of phenol (able to reduce iron to the ferrous species, more efficient) was considered. For succinic acid oxidation, a central composite optimal design (PE2) was used (tables 4 and 5). The results allowed us to establish a predictive model (Relationship lX, table 6 and figure 2) and typical results are presented in figures 3 and 4. Approximately 50% oxidation efficiencies could be obtained at 200°C; without peroxide addition, only 5% efficiency is obtained under similar conditions. Moreover, it was observed that the optimum temperature is around 205°C and that phenol is not compatible with peroxide as a promotor. A third optimal design (PE3) was used to predict the efficiency of the method for the treatrnent of acetic acid, a model for a refractory waste. It is composed only of a fractional factorial design (table 7 and 8) and the bias corresponds to the main quadratic effect of temperature (Relationship XIII and table 10). The optimum temperâture is also 205°C and greater than 20% oxidation efficiencies are obtained; at such a temperature, acetic acid cannot be oxidized with the conventional process.The results obtained for the two model compounds validate this oxidation technique. The addition of about 10 ppm of ferrous iron and of less than 20% of the stoichiometric amount in hydrogen peroxide can turn a high pressure WAO process into a medium pressure one

Whole slide image registration for the study of tumor heterogeneity

Consecutive thin sections of tissue samples make it possible to study local variation in e.g. protein expression and tumor heterogeneity by staining for a new protein in each section. In order to compare and correlate patterns of different proteins, the images have to be registered with high accuracy. The problem we want to solve is registration of gigapixel whole slide images (WSI). This presents 3 challenges: (i) Images are very large; (ii) Thin sections result in artifacts that make global affine registration prone to very large local errors; (iii) Local affine registration is required to preserve correct tissue morphology (local size, shape and texture). In our approach we compare WSI registration based on automatic and manual feature selection on either the full image or natural sub-regions (as opposed to square tiles). Working with natural sub-regions, in an interactive tool makes it possible to exclude regions containing scientifically irrelevant information. We also present a new way to visualize local registration quality by a Registration Confidence Map (RCM). With this method, intra-tumor heterogeneity and charateristics of the tumor microenvironment can be observed and quantified.Comment: MICCAI2018 - Computational Pathology and Ophthalmic Medical Image Analysis - COMPA

Linking carbon economy and architectural development of peach trees by integrating markovian models into L-PEACH

International audienceno abstrac

Isolement et identification sur culture cellulaire du virus de la gastro-entérite transmissible du porc

Un virus à effet cytolytique inhibé par l’action des sérums de référence T.G.E., sensible à l'éther et résistant à pH 3, a été isolé, pour la première fois en France, à partir de porcelets IOPS ayant manifesté un épisode gastro-entéritique consécutivement à l'inoculation d'un matériel cliniquement suspect de T.G.E

Development of a third-order accurate vorticity confinement scheme

A new 3rd-order Vorticity Confinement scheme is presented as an extension of the original VC2 scheme developed by Steinhofffor the resolution of the fluid dynamic equations. The theoretical developments are explained, and the method is tested. The results obtained show that the new scheme combines the accuracy of the underlying higher order scheme and the confinement capability of the original VC2 method

Magnetic and thermal properties of 4f-3d ladder-type molecular compounds

We report on the low-temperature magnetic susceptibilities and specific heats of the isostructural spin-ladder molecular complexes L$_{2}$[M(opba)]_{3\cdot xDMSO$\cdot y$H$_{2}$O, hereafter abbreviated with L$_{2}$M$_{3}$ (where L = La, Gd, Tb, Dy, Ho and M = Cu, Zn). The results show that the Cu containing complexes (with the exception of La$_{2}$Cu$_{3}$) undergo long range magnetic order at temperatures below 2 K, and that for Gd$_{2}$Cu$_{3}$ this ordering is ferromagnetic, whereas for Tb$_{2}$Cu$_{3}$ and Dy$_{2}$Cu$_{3}$ it is probably antiferromagnetic. The susceptibilities and specific heats of Tb$_{2}$Cu$_{3}$ and Dy$_{2}$Cu$_{3}$ above $T_{C}$ have been explained by means of a model taking into account nearest as well as next-nearest neighbor magnetic interactions. We show that the intraladder L--Cu interaction is the predominant one and that it is ferromagnetic for L = Gd, Tb and Dy. For the cases of Tb, Dy and Ho containing complexes, strong crystal field effects on the magnetic and thermal properties have to be taken into account. The magnetic coupling between the (ferromagnetic) ladders is found to be very weak and is probably of dipolar origin.Comment: 13 pages, 15 figures, submitted to Phys. Rev.

Development and analysis of high-order vorticity confinement schemes

High-order extensions of the Vorticity Confinement (VC) method are developed for the accurate com- putation of vortical flows, following the VC2 conservative formulation of Steinhoff. First, a high-order formulation of VC is presented for the case of the linear transport equation for decoupled schemes in space and time. A spectral analysis shows that the new nonlinear schemes have improved dispersive and dissipative properties compared to their linear counterparts at all orders of accuracy. For the Euler and Navier–Stokes equations, the original VC method is extended to 3 rd - and 5 th -order of accuracy, with the goal of developing a VC formulation that maintains the vorticity preserving capability of the original 1 st -order method and is suitable for application to high-order numerical simulations. The high-order ex- tensions remain both independent of the choice of baseline numerical scheme and rotationally invariant since they are based on the Laplace operator. Numerical tests validate the increased order of accuracy, vorticity-preserving capability and compatibility of the VC extensions with high-order methods

Using concepts of shoot growth and architecture to understand and predict responses of peach trees to pruning

International audienceOne definition of horticulture is "the art of cultivating garden plants" and pruning is a horticultural practice that is traditionally approached as more of an art than a science. This is largely because of the complexity of tree growth and development and a lack of general understanding and appreciation about the processes involved in governing shoot and tree growth and development. However recent tree architectural studies have provided systematic analyses of the shoot growth and statistical and dynamic simulation models have been developed that predict tree development and responses to pruning based on scientific concepts. These concepts include apical dominance (and its subcomponents; correlative inhibition, apical control and shoot epinasty); prolepsis and syllepsis; preformation and neoformation; epicormic shoot formation and plastochron (leaf emergence rates). In this paper we will discuss how many of these concepts can be combined with hidden semi-Markov chain models of shoot bud fates and a simulation model of source-sink interactions in peach trees (L-PEACH) to understand and predict natural development of peach trees and their responses to pruning. The results of these modeling efforts help explain the architectural and physiological basis of several common, empirically-based pruning systems used in California. These concepts also provide an understanding of the limitations of relying primarily on the use of pruning to control size of trees growing on commonly used invigorating rootstocks. This research demonstrates how computer simulation modeling can be used to test and analyze interactions between environmental factors and management practices in determining patterns of tree growth and development