High efficiency room temperature laser emission in heavily doped Yb:YLF

We report the tunable, CW and quasi CW laser operation at room temperature of an highly doped (30% at.) Yb:YLF crystal longitudinally pumped by a fiber coupled laser diode array. The CW output power is 1.15 W vs. an absorbed pump power of 6 W, with a slope efficiency of 31%. In quasi-CW operation (20% duty factor @10 Hz) an output power of 4 W with an absorbed power of 9.5 W, and a slope efficiency of 62.8% were obtained. The tuning range spans from 1022 to 1075 nm. To our knowledge, these are among the best experimental results obtained at room temperature with Yb doped YLF

Air gasification of digestate and its co-gasification with residual biomass in a pilot scale rotary kiln

In this study energy recovery of digestate from a biogas plant was investigated via air gasification. Gasification tests were executed in a pilot scale rotary kiln plant having a nominal biomass feeding rate of about 20 kg/h. The equivalence ratio was varied from 0.22 to 0.39 with the goal to approach the autothermal condition. Tests were carried out for 5 h in steady state condition. Syngas composition, char and gas yields were measured. To improve the cold gas efficiency of the process, a mixture of digestate and almond shells (60:40 wt%) was gasified. Autothermal condition was reached with the mixture using equivalence ratio of 0.30 where the corresponding cold gas efficiency achieved the maximum value of 55%. The raw gas had a lower heating value of 4–5 MJ/Nm3. To evaluate possible improvements in the produced gas properties, in this work the effect of steam injection was also investigated

Factors affecting the usage of T-government services - An exploratory study

CITATO NEL DATABASE ISI: ISI unique article identifier ISI:00025888540004

Bridging the gap of storage ring light sources and linac-driven free-electron lasers

High-gain free-electron lasers (FELs) are driven by short, high-charge density electron beams as only produced at dedicated single pass or recirculating linear accelerators. We describe new conceptual, technical, and modeling solutions to produce subpicosecond, up to 100 \u3bcJ energy extreme ultra-violet and soft x-ray FEL pulses at high- and tunable repetition rates, from diffraction-limited storage ring light source. In contrast to previously proposed schemes, we show that lasing can be simultaneous to the standard multibunch radiation emission from short insertion devices, and that it can be obtained with limited impact on the storage ring infrastructure. By virtue of the high-average power but moderate pulse energy, the storage ring-driven high-gain FEL would open the door to unprecedented accuracy in time-resolved spectroscopic analysis of matter in the linear response regime, in addition to inelastic scattering experiments

Efficient visible laser emission of GaN laser diode pumped Pr-doped fluoride scheelite crystals.

In the present work we report on the growth, spectroscopy and laser results of diode pumped Pr-doped LiYF4, LiLuF4 and LiGdF4 fluoride, scheelite-type structure crystals. We measured the polarisation dependent absorption and emission properties as well as the decay time of the P-3(0) level. Exploiting the P-3(2) absorption around 444 nm, we obtained efficient laser emission under GaN laser diode pumping on several transitions from the green to the near infrared wavelength range. (C) 2008 Optical Society of Americ

Fat oxidation, hormonal and plasma metabolite kinetics during a submaximal incremental test in lean and obese adults

This study aimed to compare fat oxidation, hormonal and plasma metabolite kinetics during exercise in lean (L) and obese (O) men. Sixteen L and 16 O men [Body Mass Index (BMI): 22.9 ± 0.3 and 39.0 ± 1.4 kg · m(-2)] performed a submaximal incremental test (Incr) on a cycle-ergometer. Fat oxidation rates (FORs) were determined using indirect calorimetry. A sinusoidal model, including 3 independent variables (dilatation, symmetry, translation), was used to describe fat oxidation kinetics and determine the intensity (Fat(max)) eliciting maximal fat oxidation. Blood samples were drawn for the hormonal and plasma metabolite determination at each step of Incr. FORs (mg · FFM(-1) · min(-1)) were significantly higher from 20 to 30% of peak oxygen uptake (VO2peak) in O than in L and from 65 to 85% VO2peak in L than in O (p ≤ 0.05). FORs were similar in O and in L from 35 to 60% VO2peak. Fat max was 17% significantly lower in O than in L (p<0.01). Fat oxidation kinetics were characterized by similar translation, significantly lower dilatation and left-shift symmetry in O compared with L (p<0.05). During whole exercise, a blunted lipolysis was found in O [lower glycerol/fat mass (FM) in O than in L (p ≤ 0.001)], likely associated with higher insulin concentrations in O than in L (p<0.01). Non-esterified fatty acids (NEFA) were significantly higher in O compared with L (p<0.05). Despite the blunted lipolysis, O presented higher NEFA availability, likely due to larger amounts of FM. Therefore, a lower Fat(max), a left-shifted and less dilated curve and a lower reliance on fat oxidation at high exercise intensities suggest that the difference in the fat oxidation kinetics is likely linked to impaired muscular capacity to oxidize NEFA in O. These results may have important implications for the appropriate exercise intensity prescription in training programs designed to optimize fat oxidation in O

Long maximal incremental tests accurately assess aerobic fitness in class II and III obese men.

This study aimed to compare two different maximal incremental tests with different time durations [a maximal incremental ramp test with a short time duration (8-12 min) (STest) and a maximal incremental test with a longer time duration (20-25 min) (LTest)] to investigate whether an LTest accurately assesses aerobic fitness in class II and III obese men. Twenty obese men (BMI≥35 kg.m-2) without secondary pathologies (mean±SE; 36.7±1.9 yr; 41.8±0.7 kg*m-2) completed an STest (warm-up: 40 W; increment: 20 W*min-1) and an LTest [warm-up: 20% of the peak power output (PPO) reached during the STest; increment: 10% PPO every 5 min until 70% PPO was reached or until the respiratory exchange ratio reached 1.0, followed by 15 W.min-1 until exhaustion] on a cycle-ergometer to assess the peak oxygen uptake [Formula: see text] and peak heart rate (HRpeak) of each test. There were no significant differences in [Formula: see text] (STest: 3.1±0.1 L*min-1; LTest: 3.0±0.1 L*min-1) and HRpeak (STest: 174±4 bpm; LTest: 173±4 bpm) between the two tests. Bland-Altman plot analyses showed good agreement and Pearson product-moment and intra-class correlation coefficients showed a strong correlation between [Formula: see text] (r=0.81 for both; p≤0.001) and HRpeak (r=0.95 for both; p≤0.001) during both tests. [Formula: see text] and HRpeak assessments were not compromised by test duration in class II and III obese men. Therefore, we suggest that the LTest is a feasible test that accurately assesses aerobic fitness and may allow for the exercise intensity prescription and individualization that will lead to improved therapeutic approaches in treating obesity and severe obesity

Non linear fields in the SPS and their compensation

Tight tolerances were placed upon non-linearities in the SPS magnet system and sextupoles installed to adjust the chromaticity of the machine. These sextupoles together with octupoles and active damping were used to adjust the SPS beam dynamics and to damp and suppress both multibunch and single bunch transverse instabilities up to 10/sup 13/ protons per pulse. (4 refs)

Passive mode locking of a Tm,Ho:KY(WO4)(2) laser around 2 μm

We report the first demonstration, to our knowledge, of passive mode locking in a Tm3+, Ho3+-codoped KYWO42 laser operating in the 2000-2060 nm spectral region. An InGaAsSb-based quantum well semiconductor saturable absorber mirror is used for the initiation and stabilization of the ultrashort pulse generation. Pulses as short as 3.3 ps were generated at 2057 nm with average output powers up to 315 mW at a pulse repetition frequency of 132 MHz for 1.15 W of absorbed pump power at 802 nm from a Ti:sapphire laser

CIAO: the CNR-IMAA advanced observatory for atmospheric research

Long-term observations of aerosol and clouds are of crucial importance to understand the weather climate system. At the Istituto di Metodologie per l'Analisi Ambientale of the Italian National Research Council (CNR-IMAA) an advanced atmospheric observatory, named CIAO, is operative. CIAO (CNR-IMAA Atmospheric Observatory) main scientific objective is the long term measurement for the climatology of aerosol and cloud properties. Its equipment addresses the state-of-the-art for the ground-based remote sensing of aerosol, water vapour and clouds including active and passive sensors, like lidars, ceilometers, radiometers, and a radar. This paper describes the CIAO infrastructure, its scientific activities as well as the observation strategy. The observation strategy is mainly organized in order to provide quality assured measurements for satellite validation and model evaluation and to fully exploit the synergy and integration of the active and passive sensors for the improvement of atmospheric profiling. Data quality is ensured both by the application of protocols and dedicated quality assurance programs mainly related to the projects and networks in which the infrastructure is involved. The paper also introduces examples of observations performed at CIAO and of the synergies and integration algorithms (using Raman lidar and microwave profiler data) developed and implemented at the observatory for the optimization and improvement of water vapour profiling. CIAO database represents an optimal basis to study the synergy between different sensors and to investigate aerosol-clouds interactions, and can give a significant contribution to the validation programs of the incoming new generation satellite missions