2,808 research outputs found
Kinetics of in situ epoxidation of hemp oil under heterogeneous reaction conditions: an overview with preliminary results
Epoxidised hemp oil (EHO) was synthesised in the laboratory by reacting hemp oil (HO) with peroxyacetic acid (PA) in a batch reactor. The peroxyacetic acid was formed in situ from acetic acid (AA) and hydrogen peroxide (H2O2) in the presence on an acidic ion exchange resin (Amberlite IR-120) as catalyst. The overall reaction can be thought of as having two components. The first being epoxidation, a homogenous reaction which occurs at the interface of the aqueous phase and the HO phase while the second is the formation of PA, a heterogeneous reaction at the interface of the aqueous phase and the solid catalyst phase. The overall reaction kinetics were modelled by applying the Langmuir-Hinshelwood-Hougen-Watson (LHHW) model to heterogeneous reactions. Of the steps in the reaction it is postulated that the formation of PA is rate limiting, while the epoxidation occurs comparatively fast negating the requirement for an additional homogenous model. The diffusion steps in the reaction are also ignored in the kinetic model as it is believed that their effects are negligible due to intensive mixing in the batch reactor. Experiments were used to determine the optimal molar ratios of reactants and it was found that at these conditions 88% conversion of double bonds to epoxy groups occurred. The kinetic model was found to be in good agreement with the experimental results
The unsymmetrical load and bending moment on the horizontal tail of a jet-powered bomber measured in sideslipping flight
The Vertical-tail Loads Measured During a Flight Investigation on a Jet-powered Bomber Airplane
A Comparison of Flight Measurements with Calculations of the Loss in Rolling Effectiveness Due to Wing Twist
Initial results of a flight investigation of the wing and tail loads on an airplane equipped with a vane-controlled gust-alleviation system
Results are given of an analysis of wing and horizontal-tail spar strains measured on a twin-engine light transport airplane which was modified for the installation of a control system to alleviate airplane motions in turbulent air and thus improve passenger comfort. From a sample of the measurements obtained in flight through clear-air turbulence, normal acceleration at the airplane center of gravity was reduced 43 percent, wing main-spar bending strains were reduced, and wing-spar shear strains were increased. Horizontal-tail shear and bending strains were increased. Measurements of aerodynamic loads obtained in a pull-up with the gust-alleviation system in operation are also presented
Time histories of the loads and deformations on the horizontal tail of a jet-powered bomber airplane in accelerated maneuvers at 30,000 feet
- …