The Detection of Unsteady Flow Separation with Bioinspired Hair-Cell Sensors

Biologists hypothesize that thousands of micro-scale hairs found on bat wings function as a network of air-flow sensors as part of a biological feedback flow control loop. In this work, we investigate hair-cell sensors as a means of detecting flow features in an unsteady separating flow over a cylinder. Individual hair-cell sensors were modeled using an Euler-Bernoulli beam equation forced by the fluid flow. When multiple sensor simulations are combined into an array of hair-cells, the response is shown to detect the onset and span of flow reversal, the upstream movement of the point of zero wall shear-stress, and the formation and growth of eddies near the wall of a cylinder. A linear algebraic hair-cell model, written as a function of the flow velocity, is also derived and shown to capture the same features as the hair-cell array simulatio

Preliminary results of spectral reflectance studies of tycho crater

The preliminary analysis and interpretation of near infrared spectra obtained for both the interior and exterior deposits associated with the Tycho crater is presented. Specific objectives were: (1) to determine the composition and stratigraphy of the highland crust in the Tycho target site; (2) to determine the likely composition of the primary ejecta which may be present in ray deposits; (3) to investigate the nature of spectral units defined in previous studies; (4) to further investigate the nature and origin of both the bright and dark haloes around the rim crest; and (5) to compare the compositions determined for the Tycho units with those of the Aristarchus crater as well as typical highland deposits. The spectra obtained for the interior areas exhibit similar spectral features. These include relatively strong 1 micron absorption bands whose minima are centered between 0.97 and 0.99 microns and shallow to intermediate continuum slopes. The spectra generally exhibit indications of a 1.3 micron feature consistent with the presence of Fe(2+) bearing plagioclase feldspar. The strong 1 micron absorption features indicate a dominant high Ca clinopyroxene component. Results obtained from the ejecta deposits show that the spectrum of the inner, bright halo is almost identical with those obtained for interior units. The spectrum of the dark halo exhibits a wide, relatively shallow absorption feature centered at 1.01 microns, a 1.3 micron absorption, and a steep continuum slope. This spectrum is interpreted as indicating the presence of pyroxene, Fe-bearing feldspar, and a significant component of Fe-bearing impact melt glass. Finally, the spectra of spots inside Tycho show similarity with certain spectra for Aristarchus. However, the suite of spectra obtained for Tycho exhibits a different trend in terms of band center versus width

Hydrodynamic object recognition using pressure sensing

Hydrodynamic sensing is instrumental to fish and some amphibians. It also represents, for underwater vehicles, an alternative way of sensing the fluid environment when visual and acoustic sensing are limited. To assess the effectiveness of hydrodynamic sensing and gain insight into its capabilities and limitations, we investigated the forward and inverse problem of detection and identification, using the hydrodynamic pressure in the neighbourhood, of a stationary obstacle described using a general shape representation. Based on conformal mapping and a general normalization procedure, our obstacle representation accounts for all specific features of progressive perceptual hydrodynamic imaging reported experimentally. Size, location and shape are encoded separately. The shape representation rests upon an asymptotic series which embodies the progressive character of hydrodynamic imaging through pressure sensing. A dynamic filtering method is used to invert noisy nonlinear pressure signals for the shape parameters. The results highlight the dependence of the sensitivity of hydrodynamic sensing not only on the relative distance to the disturbance but also its bearing

Remote sensing and geologic studies of the terrain northwest of Humorum basin

A portion of the highlands terrain northwest of the Humorum basin, a large multiringed impact structure on the southwestern portion of the lunar nearside, exhibits anomalous characteristics in several remote sensing data sets. A variety of remote sensing studies of the terrain northwest of Humorum basin were performed in order to determine the composition and origin of the anomalous unit as well as the composition of the highland material exposed by the Humorum impact event. It was found that at least a portion of the mare-bounding ring of Humorum is composed of pure anorthosite. Other details of the study are reported

Microbiological influences on fracture surfaces of intact mudstone and the implications for geological disposal of radioactive waste

The significance of the potential impacts of microbial activity on the transport properties of host rocks for geological repositories is an area of active research. Most recent work has focused on granitic environments. This paper describes pilot studies investigating changes in transport properties that are produced by microbial activity in sedimentary rock environments in northern Japan. For the first time, these short experiments (39 days maximum) have shown that the denitrifying bacteria, Pseudomonas denitrificans, can survive and thrive when injected into flow-through column experiments containing fractured diatomaceous mudstone and synthetic groundwater under pressurized conditions. Although there were few significant changes in the fluid chemistry, changes in the permeability of the biotic column, which can be explained by the observed biofilm formation, were quantitatively monitored. These same methodologies could also be adapted to obtain information from cores originating from a variety of geological environments including oil reservoirs, aquifers and toxic waste disposal sites to provide an understanding of the impact of microbial activity on the transport of a range of solutes, such as groundwater contaminants and gases (e.g. injected carbon dioxide)

Sceptical Employees as CSR Ambassadors in Times of Financial Uncertainty

This chapter offers new insights into the understanding of internal (employee) perceptions of organizational corporate social responsibility (CSR) policies and strategies. This study explores the significance of employees’ involvement and scepticism upon CSR initiatives and focuses on the effects it may have upon word of mouth (WOM) and the development of employee–organisation relationships. Desk research introduces the research questions. Data for the research questions were gathered through a self-completion questionnaire distributed in a hardcopy form to the sample. An individual’s level of scepticism and involvement appears to affect the development of a positive effect on employees’ WOM. Involvement with the domain of the investment may be a central factor affecting relationship building within the organization, and upon generation of positive WOM. The chapter offers a conceptual framework to public relations (PR) and corporate communications practitioners, which may enrich their views and understanding of the use and value of CSR for communication strategies and practices. For-profit organisations are major institutions in today’s society. CSR is proffered as presenting advantages for (at macro level) society and (micro level) the organization and its employees. Concepts, such as involvement and scepticism, which have not been rigorously examined in PR and corporate communication literature, are addressed. By examining employee perceptions, managers and academic researchers gain insights into the acceptance, appreciation and effectiveness of CSR policies and activities upon the employee stakeholder group. This will affect current and future CSR communication strategies. The knowledge acquired from this chapter may be transferable outside the for-profit sector

Application of Experimental Design to Hydrogen Storage: Optimisation of Lignin-Derived Carbons

Lignin is a significant by-product of the paper pulping and biofuel industries. Upgrading lignin to a high-value product is essential for the economic viability of biorefineries for bioethanol production and environmentally benign pulping processes. In this work, the feasibility of lignin-derived activated carbons for hydrogen storage was studied using a Design of Experiments methodology, for a time and cost-efficient exploration of the synthesis process. Four factors (carbonisation temperature, activation temperature, carbonisation time, and activation time) were investigated simultaneously. Development of a mathematical model allowed the factors with the greatest impact to be identified using regression analysis for three responses: surface area, average pore size, and hydrogen uptake at 77 K and 1 bar. Maximising the surface area required activation conditions using the highest settings, however, a low carbonisation temperature was also revealed to be integral to prevent detrimental and excessive pore widening. A small pore size, vital for efficient hydrogen uptake, could be achieved by using low carbonisation temperature but also low activation temperatures. An optimum was achieved using the lowest carbonisation conditions (350 °C for 30 min) to retain a smaller pore size, followed by activation under the severest conditions (1000 °C for 60 min) to maximise surface area and hydrogen uptake. These conditions yielded a material with a high surface area of 1400 m2 g−1 and hydrogen uptake of 1.9 wt.% at 77 K and 1 bar

Thermal properties of Ti-doped Cu-Zn soft ferrites used as thermally actuated material for magnetizing superconductors

A great majority of widely used ferrite ceramics exhibit a relatively high temperature of order–disorder phase transition in their magnetic subsystem. For applications related to the magnetization process of superconductors, however, a low value of T c is required. Here we report and analyze in detail the thermal properties of bulk Ti-doped Cu–Zn ferrite ceramics Cu0.3Zn0.7Ti0.04Fe1.96O4 and Mg0.15Cu0.15Zn0.7Ti0.04Fe1.96O4. They are characterized by a Curie temperature in the range 120–170 K and a maximum DC magnetic susceptibility exceeding 20 for the Cu0.3Zn0.7Ti0.04Fe1.96O4 material. The temperature dependence of both the specific heat C p and of the thermal conductivity κ, determined between 2 and 300 K, are found not to exhibit any peculiar feature at the magnetic transition temperature. The low-temperature dependence of both κ and the mean free path of phonons suggests a mesoscopic fractal structure of the grains. From the measured data, the characteristics of thermally actuated waves are estimated. The low magnetic phase transition temperature and suitable thermal parameters make the investigated ferrite ceramics applicable as magnetic wave producers in devices designed for magnetization of high-temperature superconductors.We thank the University of Liège (ULg) and the Ministry of Higher Education of Communauté Française de Belgique for a research grant Action de Recherches Concertées (ARC 11/16-03). We thank Alexander Krivchikov for fruitful discussions and Oksana Mendiuk for taking SEM images. This work is part of a collaboration programme between the FRS-FNRS (Belgium) and the PAS (Polish Academy of Sciences).This is the author accepted manuscript. The final version is available from the Institute of Physics via http://dx.doi.org/10.1088/0022-3727/49/12/12500

Behavior of bulk high-temperature superconductors of finite thickness subjected to crossed magnetic fields

Crossed magnetic field effects on bulk high-temperature superconductors have been studied both experimentally and numerically. The sample geometry investigated involves finite-size effects along both (crossed) magnetic field directions. The experiments were carried out on bulk melt-processed Y-Ba-Cu-O (YBCO) single domains that had been pre-magnetized with the applied field parallel to their shortest direction (i.e. the c-axis) and then subjected to several cycles of the application of a transverse magnetic field parallel to the sample ab plane. The magnetic properties were measured using orthogonal pick-up coils, a Hall probe placed against the sample surface and Magneto-Optical Imaging (MOI). We show that all principal features of the experimental data can be reproduced qualitatively using a two-dimensional finite-element numerical model based on an E-J power law and in which the current density flows perpendicularly to the plane within which the two components of magnetic field are varied. The results of this study suggest that the suppression of the magnetic moment under the action of a transverse field can be predicted successfully by ignoring the existence of flux-free configurations or flux-cutting effects. These investigations show that the observed decay in magnetization results from the intricate modification of current distribution within the sample cross-section. It is also shown that the model does not predict any saturation of the magnetic induction, even after a large number (~ 100) of transverse field cycles. These features are shown to be consistent with the experimental data.Comment: 41 pages, 9 figures, accepted in Phys. Rev. B Changes : 8 references added, a few precisions added, some typos correcte