931 research outputs found
Singlet vs Nonsinglet Perturbative Renormalization factors of Staggered Fermion Bilinears
In this paper we present the perturbative computation of the difference
between the renormalization factors of flavor singlet
(, : flavor index) and nonsinglet
() bilinear quark operators
(where ) on the lattice. The computation is performed to
two loops and to lowest order in the lattice spacing, using Symanzik improved
gluons and staggered fermions with twice stout-smeared links. The stout
smearing procedure is also applied to the definition of bilinear operators. A
significant part of this work is the development of a method for treating some
new peculiar divergent integrals stemming from the staggered formalism. Our
results can be combined with precise simulation results for the renormalization
factors of the nonsinglet operators, in order to obtain an estimate of the
renormalization factors for the singlet operators. The results have been
published in Physical Review D.Comment: 8 pages, 3 figures, 2 tables, Proceedings of the 35th International
Symposium on Lattice Field Theory, 18-24 June 2017, Granada, Spai
Turbulent Flows and Pollution Dispersion around Tall Buildings Using Adaptive Large Eddy Simulation (LES)
The motivation for this work stems from the increased number of high-rise buildings/skyscrapers all over the world, and in London, UK, and hence the necessity to see their effect on the local environment. We concentrate on the mean velocities, Reynolds stresses, turbulent kinetic energies (TKEs) and tracer concentrations. We look at their variations with height at two main locations within the building area, and downstream the buildings. The pollution source is placed at the top of the central building, representing an emission from a Combined Heat and Power (CHP) plant. We see how a tall building may have a positive effect at the lower levels, but a negative one at the higher levels in terms of pollution levels. Mean velocities at the higher levels (over 60 m in real life) are reduced at both locations (within the building area and downstream it), whilst Reynolds stresses and TKEs increase. However, despite the observed enhanced turbulence at the higher levels, mean concentrations increase, indicating that the mean flow has a greater influence on the dispersion. At the lower levels (Z < 60 m), the presence of a tall building enhanced dispersion (hence lower concentrations) for many of the configurations
Mechanisms of pelvic floor muscle function and the effect on the urethra during a cough
Background: Current measurement tools have difficulty identifying the automaticphysiologic processes maintaining continence, and many questions still remainabout pelvic floor muscle (PFM) function during automatic events.Objective: To perform a feasibility study to characterise the displacement, velocity,and acceleration of the PFM and the urethra during a cough.Design, setting, and participants: A volunteer convenience sample of 23 continentwomen and 9 women with stress urinary incontinence (SUI) from the generalcommunity of San Francisco Bay Area was studied.Measurements: Methods included perineal ultrasound imaging, motion trackingof the urogenital structures, and digital vaginal examination. Statistical analysisused one-tailed unpaired student t tests, and Welch’s correction was applied whenvariances were unequal.Results and limitations: The cough reflex activated the PFM of continent women tocompress the urogenital structures towards the pubic symphysis, which wasabsent in women with SUI. The maximum accelerations that acted on the PFMduring a cough were generally more similar than the velocities and displacements.The urethras of women with SUI were exposed to uncontrolled transverse accelerationand were displaced more than twice as far ( p = 0.0002), with almost twicethe velocity ( p = 0.0015) of the urethras of continent women. Caution regardingthe generalisability of this study is warranted due to the small number of women inthe SUI group and the significant difference in parity between groups.Conclusions: During a cough, normal PFM function produces timely compressionof the pelvic floor and additional external support to the urethra, reducing displacement,velocity, and acceleration. In women with SUI, who have weakerurethral attachments, this shortening contraction does not occur; consequently,the urethras of women with SUI move further and faster for a longer duratio
Modelling of Packed Bed and Coated Wall Microreactors for 6 Methanol Steam Reforming for Hydrogen Production
A Computational Fluid Dynamics (CFD) study has been conducted to assess the performance of packed bed and coated wall 9 microreactors for the steam reforming of methanol with a CuO/ZnO/Al2O3 based catalyst (BASF F3-01). The results obtained 10 were compared to experimental data from literature to assess the validity and robustness of the models, and a good 11 validation has been obtained. The performance of the packed bed and coated wall microreactors are similar at a constant 12 reforming temperature. It was found that methanol conversion is enhanced with increasing temperature, residence time, 13 steam to methanol ratio, and catalyst coating thickness. Furthermore, internal and external mass transfer phenomena were 14 investigated using the models, and it was found that there were no internal and external mass transfer resistances for this 15 reactor configurations. Further studies demonstrated that larger catalyst pellet sizes led to the presence of internal mass 16 transfer resistances, which in turn causes lower methanol conversions. The CFD models have exhibited a sound agreement 17 with the experimental data, hence they can be used to predict the steam reforming of methanol in microreactors
Renormalization of local quark-bilinear operators for Nf=3 flavors of SLiNC fermions
The renormalization factors of local quark-bilinear operators are computed
non-perturbatively for flavors of SLiNC fermions, with emphasis on the
various procedures for the chiral and continuum extrapolations. The simulations
are performed at a lattice spacing fm, and for five values of the
pion mass in the range of 290-465 MeV, allowing a safe and stable chiral
extrapolation. Emphasis is given in the subtraction of the well-known pion pole
which affects the renormalization factor of the pseudoscalar current. We also
compute the inverse propagator and the Green's functions of the local bilinears
to one loop in perturbation theory. We investigate lattice artifacts by
computing them perturbatively to second order as well as to all orders in the
lattice spacing. The renormalization conditions are defined in the RI-MOM
scheme, for both the perturbative and non-perturbative results. The
renormalization factors, obtained at different values of the renormalization
scale, are translated to the scheme and are evolved
perturbatively to 2 GeV. Any residual dependence on the initial renormalization
scale is eliminated by an extrapolation to the continuum limit. We also study
the various sources of systematic errors.
Particular care is taken in correcting the non-perturbative estimates by
subtracting lattice artifacts computed to one loop perturbation theory using
the same action. We test two different methods, by subtracting either the
contributions, or the complete (all orders in )
one-loop lattice artifacts.Comment: 33 pages, 27 figures, 6 table
Perturbatively improving renormalization constants
Renormalization factors relate the observables obtained on the lattice to
their measured counterparts in the continuum in a suitable renormalization
scheme. They have to be computed very precisely which requires a careful
treatment of lattice artifacts. In this work we present a method to suppress
these artifacts by subtracting one-loop contributions proportional to the
square of the lattice spacing calculated in lattice perturbation theory.Comment: 7 pages, 2 figures, LATTICE 201
Computational Fluid Dynamic (CFD) and Reaction Modelling Study 6 of Bio-oil Catalytic Hydrodeoxygenation in Microreactors
A Computational Fluid Dynamic (CFD) model was derived and validated, in order to, investigate the hydrodeoxygenation 9 reaction of 4-propylguaiacol, which is a lignin-derived compound present in bio-oil. A 2-D packed bed microreactor was 10 simulated using pre-sulphided NiMo/Al2O3 solid catalyst in isothermal operation. A pseudo-homogeneous model was first 11 created to validate the experimental results from literature. Various operational parameters were investigated and validated 12 with the experimental data, such as temperature, pressure and liquid flow rate; and it was found that the CFD findings were 13 in very good agreement with the results from literature. The model was then upgraded to that of a detailed multiphase 14 configuration; and phenomena such as internal and external mass transfer limitations were investigated, as well as, reactant 15 concentrations on the rate of 4-propylguaiacol. Both models agreed with the experimental data, and therefore confirm their 16 ability for applications related to the prediction of the behaviour of bio-oil compounds hydrodeoxygenation
Development of a Flat Membrane Microchannel Packed- Bed Reactor for Scalable Aerobic Oxidation of Benzyl Alcohol in Flow
A Teflon AF-2400 flat membrane microchannel reactor was designed and demonstrated for safe and scalable oxidation of solvent-free benzyl alcohol with molecular oxygen on Au- Pd/TiO2 catalyst. The microchannel reactor employed a mesh-supported Teflon AF-2400 flat membrane, with gas and liquid channels on each side. Catalyst particles were packed in the liquid flow channel. Operation with 20 bara pressure difference between the gas and the liquid phases was possible at 120 ºC. Pervaporation of organics through the membrane was experimentally measured to assure that the organic vapour concentration remains below the lower explosive limit during the reaction. The effect of oxygen pressure was studied, and the oxygen was shown to have a positive effect on the oxidation of benzyl alcohol. A conversion of benzyl alcohol of 70% with 71% selectivity to benzaldehyde was obtained at 1150 gcat·s/galcohol, 8.4 bara oxygen pressure and 10 bara liquid pressure. Doubling the membrane thickness led to a 20% drop of oxygen consumption rate, indicating the main oxygen transfer resistance not existing in the membrane. When changing the catalyst particle size and the liquid flow rate, no significant effect was observed on the oxidation reaction rate. An effectiveness factor approach is proposed to predict the effect of oxygen permeation and transverse mass transfer on the catalyst packed in the membrane reactor, which suggests that the oxidation of benzyl alcohol on the highly active Au-Pd/TiO2 catalyst is controlled by the oxygen transverse mass transfer in the bulk liquid within the catalyst bed. Scale-up of the flat membrane microchannel reactor was demonstrated through widening the liquid channel width by ~10 times, which increased the reactor productivity by a factor of 8
Charge radii of the nucleon from its flavor dependent Dirac form factors
We have determined the proton and the neutron charge radii from a global
analysis of the proton and the neutron elastic form factors, after first
performing a flavor decomposition of these form factors under charge symmetry
in the light cone frame formulation. We then extracted the transverse
mean-square radii of the flavor dependent quark distributions. In turn, these
are related in a model-independent way to the proton and neutron charge radii
but allow us to take into account motion effects of the recoiling nucleon for
data at finite but high momentum transfer. In the proton case we find ,
consistent with the proton charge radius obtained from muonic hydrogen
spectroscopy \cite{pohl:2010,antog2013}. The current method improves on the
precision of the extraction based on the form factor
measurements. Furthermore, we find no discrepancy in the
determination among the different electron scattering measurements, all of
which, utilizing the current method of extraction, result in a value that is
consistent with the smallest extraction from the electron
scattering measurements \cite{Xiong:2019umf}. Concerning the neutron case, past
results relied solely on the neutron-electron scattering length measurements,
which suffer from an underestimation of underlying systematic uncertainties
inherent to the extraction technique. Utilizing the present method we have
performed the first extraction of the neutron charge radius based on nucleon
form factor data, and we find
Process Simulation Modelling of the Catalytic Hydrodeoxygenation of 4-Propylguaiacol in Microreactors
A process simulation model was created using Aspen Plus to investigate the hydrodeoxygenation of 4-propylguaiacol, a model component in lignin-derived pyrolysis oil, over a presulphided NiMo/Al2O3 solid catalyst. Process simulation modelling methods were used to develop the pseudo-homogeneous packed bed microreactor. The reaction was conducted at 400 °C and an operating pressure of 300 psig with a 4-propylguaiacol liquid flow rate of 0.03 mL·min−1 and a hydrogen gas flow rate of 0.09 mL·min−1. Various operational parameters were investigated and compared to the experimental results in order to establish their effect on the conversion of 4-propylguaiacol. The parameters studied included reaction temperature, pressure, and residence time. Further changes to the simulation were made to study additional effects. In doing so, the operation of the same reactor was studied adiabatically, rather than isothermally. Moreover, different equations of state were used. It was observed that the conversion was enhanced with increasing temperature, pressure, and residence time. The results obtained demonstrated a good model validation when compared to the experimental results, thereby confirming that the model is suitable to predict the hydrodeoxygenation of pyrolysis oil
- …