Melt infiltration casting of bulk metallic-glass matrix composites

The authors describe a technique for melt infiltration casting of composites with a metallic-glass matrix. We made rods 5 cm in length and 7 mm in diameter. The samples were reinforced by continuous metal wires, tungsten powder, or silicon carbide particulate preforms. The most easily processed composites were those reinforced with tungsten and carbon steel continuous wire reinforcement. The Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 matrix was quenched to a glass after infiltrating the reinforcement. We analyzed the microstructure of the composites by x-ray diffraction and scanning electron microscopy. The measured porosity was less than 3% and the matrix was about 97% amorphous material

Mechanical properties of Zr_(57)Nb_5Al_(10)Cu_(15.4)Ni_(12.6) metallic glass matrix particulate composites

To increase the toughness of a metallic glass with the nominal composition Zr_(57)Nb_5Al_(10)Cu_(15.4)Ni_(12.6), it was used as the matrix in particulate composites reinforced with W, WC, Ta, and SiC. The composites were tested in compression and tension experiments. Compressive strain to failure increased by more than 300% compared with the unreinforced Zr_(57)Nb_5Al_(10)Cu_(15.4)Ni_(12.6), and energy to break of the tensile samples increased by more than 50%. The increase in toughness came from the particles restricting shear band propagation, promoting the generation of multiple shear bands and additional fracture surface area. There was direct evidence of viscous flow of the metallic glass matrix within the confines of the shear bands

Shear bands and cracking of metallic glass plates in bending

The thickness dependence of yielding and fracture of metallic glass plates subjected to bending is considered in terms of the shear band processes responsible for these properties. We argue that the shear band spacing (and length) scales with the thickness of the plate because of strain relaxation in the vicinity of the shear band at the surface. This is consistent with recent measurements of shear band spacing versus sample size. We also argue that the shear displacements in the shear band scale with the shear band length and plate thickness, thus causing cracks to be initiated in thicker plates at smaller bending strains. This leads to fracture bending strains that decrease markedly with increasing plate thickness, consistent with recent experiments. These results suggest that amorphous metals in the form of foams might have superior ductility and toughness

Crystal structure analysis of intermetallic compounds

Study concerns crystal structures and lattice parameters for a number of new intermetallic compounds. Crystal structure data have been collected on equiatomic compounds, formed between an element of the Sc, Ti, V, or Cr group and an element of the Co or Ni group. The data, obtained by conventional methods, are presented in an easily usable tabular form

The Problem of Planting Louisiana Swamplands when Nutria (\u3cem\u3eMyocastor coypu\u3c/em\u3e) are Present

Logging of baldcypress (Taxodium distichum) in the swamps of the southeastern United States is once again becoming common and an area of particular concern in Louisiana is the regeneration of cypress in its natural environment. One way to ensure the proper stocking of cypress is to plant seedlings, but nutria usually damage or destroy newly planted seedlings and are a deterrent to cypress regeneration in flooded areas. In 1985 cypress seedlings were planted in a flooded logged area and in an area where flooding was preventing the establishment of natural seedlings. Nutria destroyed 86% of the seedlings in the Barataria watershed (logged area) and 100% in the Lake Verret watershed. One-half of the Barataria seedlings were protected with Vexar seedling protectors, but these were no deterrent to nutria. A second planting was made in the Lake Verret basin and the seedlings surrounded by chicken wire fencing. Nutria did no damage to the protected seedlings. A third planting was made in the Lake Verret area in September 1985 to determine if nutria would destroy late planted seedlings. Once again no nutria damage was observed. Implications are that spring-planted seedlings need protection to allow them to establish a root system making them more difficult for the nutria to pull up. Fall-planted seedlings appear to be less susceptible to damage because of the abundant food supply provided by aquatic plants that grow during the summer and fall. Once firmly established, cypress seedlings are less susceptible to nutria damage

PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 2: User's manual (version 3.0)

A comprehensive description of user problem definition for the PAN AIR (Panel Aerodynamics) system is given. PAN AIR solves the 3-D linear integral equations of subsonic and supersonic flow. Influence coefficient methods are used which employ source and doublet panels as boundary surfaces. Both analysis and design boundary conditions can be used. This User's Manual describes the information needed to use the PAN AIR system. The structure and organization of PAN AIR are described, including the job control and module execution control languages for execution of the program system. The engineering input data are described, including the mathematical and physical modeling requirements. Version 3.0 strictly applies only to PAN AIR version 3.0. The major revisions include: (1) inputs and guidelines for the new FDP module (which calculates streamlines and offbody points); (2) nine new class 1 and class 2 boundary conditions to cover commonly used modeling practices, in particular the vorticity matching Kutta condition; (3) use of the CRAY solid state Storage Device (SSD); and (4) incorporation of errata and typo's together with additional explanation and guidelines

A meta-BACI approach forevaluating management intervention on chronic wasting disease in mule deer

Advances in acquiring and analyzing the spatial attributes of data have greatlyenhanced the potential utility of wildlife disease surveillance data for addressing problems ofecological or economic importance. We present an approach for using wildlife diseasesurveillance data to identify areas for (or of ) intervention, to spatially delineate pairedtreatment and control areas, and then to analyze these nonrandomly selected sites in a meta-analysis framework via before–after–control–impact (BACI) estimates of effect size. We applythese methods to evaluate the effectiveness of attempts to reduce chronic wasting disease(CWD) prevalence through intensive localized culling of mule deer (Odocoileus hemionus)innorth-central Colorado, USA. Areas where surveillance data revealed high prevalence or caseclusters were targeted by state wildlife management agency personnel for focal scale (onaverage ,17 km2) culling, primarily via agency sharpshooters. Each area of sustained cullingthat we could also identify as unique by cluster analysis was considered a potential treatmentarea. Treatment areas, along with spatially paired control areas that we constructed post hocin a case-control design (collectively called ‘‘management evaluation sites’’), were thendelineated using home range estimators. Using meta-BACI analysis of CWD prevalence datafor all management evaluation sites, the mean effect size (change of prevalence on treatmentareas minus change in prevalence on their paired control areas) was 0.03 (SE ¼ 0.03); meaneffect size on treatment areas was not greater than on paired control areas. Excluding cullsamples from prevalence estimates or allowing for an equal or greater two-year lag in systemresponses to management did not change this outcome. We concluded that managementbenefits were not evident, although whether this represented true ineffectiveness or was a resultof lack of data or insufficient duration of treatment could not be discerned. Based on ourobservations, we offer recommendations for designing a management experiment with 80%power to detect a 0.10 drop in prevalence over a 6–12-year period

Survival of the Fattest: How Body Fat and Migration Influence Survival in Highly Seasonal Environments

1. Energy stores and migration are important adaptations for animals in seasonal environments, but their roles may vary relative to an animal\u27s endogenous and exogenous environment. In partially migratory populations, migrants and residents experience different seasonal environments; thus, the influence of energy stores on survival may differ relative to migratory tactic, with potential consequences to survival and fitness. 2. Using data from Sierra Nevada bighorn sheep (Ovis canadensis sierrae; hereafter, Sierra bighorn), we tested the hypothesis that body fat (energy stores) buffers animals against their environment, but that buffering capacity differs across environments experienced by high-elevation residents (using a single range year round), traditional migrants (making 1 round-trip movement between high- and low-elevation ranges during winter) and vacillating migrants (making ≥2 round trips between high- and low-elevation ranges during winter). We predicted that: for animals with high levels of body fat, survival would be high regardless of migratory tactic; residents would require larger stores of body fat to survive than migrants; energy stores would be least influential to survival for vacillating migrants. 3. High levels of body fat in autumn (≥14% for females and ≥19% for males) largely buffered animals against harsh environments (survival \u3e0.90) regardless of migratory tactic. At lower levels of body fat, traditional migrants had higher survival than residents. Vacillating migrants exhibited nearly 100% survival with no detectable effect of body fat on survival. 4. Collectively, these results support the hypothesis that body fat buffers animals against harsh environments but that the buffering capacity differed relative to the environment and highly flexible behaviours (i.e. vacillating migration) can allow animals to decouple survival from body fat. 5. Our work reveals that synergies between physiological and behavioural adaptations of animals in highly seasonal environments carry potential fitness consequences for individuals and demographic consequences for populations