3,777 research outputs found

    Quantitative localized proton-promoted dissolution kinetics of calcite using scanning electrochemical microscopy (SECM)

    Get PDF
    Scanning electrochemical microscopy (SECM) has been used to determine quantitatively the kinetics of proton-promoted dissolution of the calcite (101̅4) cleavage surface (from natural “Iceland Spar”) at the microscopic scale. By working under conditions where the probe size is much less than the characteristic dislocation spacing (as revealed from etching), it has been possible to measure kinetics mainly in regions of the surface which are free from dislocations, for the first time. To clearly reveal the locations of measurements, studies focused on cleaved “mirror” surfaces, where one of the two faces produced by cleavage was etched freely to reveal defects intersecting the surface, while the other (mirror) face was etched locally (and quantitatively) using SECM to generate high proton fluxes with a 25 μm diameter Pt disk ultramicroelectrode (UME) positioned at a defined (known) distance from a crystal surface. The etch pits formed at various etch times were measured using white light interferometry to ascertain pit dimensions. To determine quantitative dissolution kinetics, a moving boundary finite element model was formulated in which experimental time-dependent pit expansion data formed the input for simulations, from which solution and interfacial concentrations of key chemical species, and interfacial fluxes, could then be determined and visualized. This novel analysis allowed the rate constant for proton attack on calcite, and the order of the reaction with respect to the interfacial proton concentration, to be determined unambiguously. The process was found to be first order in terms of interfacial proton concentration with a rate constant k = 6.3 (± 1.3) × 10–4 m s–1. Significantly, this value is similar to previous macroscopic rate measurements of calcite dissolution which averaged over large areas and many dislocation sites, and where such sites provided a continuous source of steps for dissolution. Since the local measurements reported herein are mainly made in regions without dislocations, this study demonstrates that dislocations and steps that arise from such sites are not needed for fast proton-promoted calcite dissolution. Other sites, such as point defects, which are naturally abundant in calcite, are likely to be key reaction sites

    An examination of the Michigan 2010 motor vehicle traffic crash fatality increase

    Full text link
    In 2010, national fatal crash counts went down by 3.5%, following on the heels of substantial drops in 2008 and 2009. However, in Michigan, fatal crashes were down substantially in 2009, but up by nearly 8% in 2010. This report contains an in-depth look at the patterns associated with Michigan’s fatal crash increase in 2010. In particular, we present a time series analysis of fatal-crash trends over the last 40 years. In addition, we provide breakdowns of crash subcategories, focusing on alcohol and drug use by drivers, commercial vehicles, young and elderly drivers, motorcycles, and construction-zone crashes. Finally, we compare the pattern in Michigan to the patterns of fatal crashes for three other states. The primary result of these analyses is that 2009 was unusually low in fatal crashes and 2010 represents a return to normal numbers. That said, fatal-crash-involved drivers testing positive for blood THC have more than doubled in 2010. In addition, construction zone crashes have increased, though the base numbers are too low to determine whether the increase is significant. Motorcycle fatalities showed large increases in 2010, especially in collisions with other motor vehicles. In the multi-state comparison, the nearest state, Wisconsin, showed the same 2009 decrease and 2010 increase in total crashes, while more distant states of Idaho and Missouri showed steady decreases. These results are consistent with regional trends reported by NHTSA. The four states showed similar results with steady decreases in overall crashes and steady increases in drug-related fatal crashes.Michigan Office of Highway Safety Planninghttp://deepblue.lib.umich.edu/bitstream/2027.42/89936/1/102816.pd

    Literacy practices of primary education children in Andalusia (Spain): a family-based perspective

    Get PDF
    Primary school children develop literacy practices in various domains and situations in everyday life. This study focused on the analysis of literacy practices of children aged 8–12 years from the perspec- tive of their families. 1,843 families participated in the non-experimental explanatory study. The children in these families speak Spanish as a first language and are schooled in this language. The instrument used was a self-report questionnaire about children’s home-literacy practices. The data obtained were analysed using categorical principal components analysis (CATPCA) and analysis of variance (ANOVA). The results show the complex relationship between literacy practices developed by children in the domains of home and school and the limited development of a literacy-promoting ‘third space’. In conclusion, the families in our study had limited awareness of their role as literacy- promoting agents and thought of literacy learning as restricted to formal or academic spaces

    An Efficient Data Structure for Dynamic Two-Dimensional Reconfiguration

    Full text link
    In the presence of dynamic insertions and deletions into a partially reconfigurable FPGA, fragmentation is unavoidable. This poses the challenge of developing efficient approaches to dynamic defragmentation and reallocation. One key aspect is to develop efficient algorithms and data structures that exploit the two-dimensional geometry of a chip, instead of just one. We propose a new method for this task, based on the fractal structure of a quadtree, which allows dynamic segmentation of the chip area, along with dynamically adjusting the necessary communication infrastructure. We describe a number of algorithmic aspects, and present different solutions. We also provide a number of basic simulations that indicate that the theoretical worst-case bound may be pessimistic.Comment: 11 pages, 12 figures; full version of extended abstract that appeared in ARCS 201

    Variability of M giant stars based on Kepler photometry: general characteristics

    Get PDF
    M giants are among the longest-period pulsating stars which is why their studies were traditionally restricted to analyses of low-precision visual observations, and more recently, accurate ground-based data. Here we present an overview of M giant variability on a wide range of time-scales (hours to years), based on analysis of thirteen quarters of Kepler long-cadence observations (one point per every 29.4 minutes), with a total time-span of over 1000 days. About two-thirds of the sample stars have been selected from the ASAS-North survey of the Kepler field, with the rest supplemented from a randomly chosen M giant control sample. We first describe the correction of the light curves from different quarters, which was found to be essential. We use Fourier analysis to calculate multiple frequencies for all stars in the sample. Over 50 stars show a relatively strong signal with a period equal to the Kepler-year and a characteristic phase dependence across the whole field-of-view. We interpret this as a so far unidentified systematic effect in the Kepler data. We discuss the presence of regular patterns in the distribution of multiple periodicities and amplitudes. In the period-amplitude plane we find that it is possible to distinguish between solar-like oscillations and larger amplitude pulsations which are characteristic for Mira/SR stars. This may indicate the region of the transition between two types of oscillations as we move upward along the giant branch.Comment: 12 pages, 13 figures, accepted for publication in MNRAS. The normalized light curves are available upon reques

    The Implications of the Microwave Background Anisotropies for Laser-Interferometer-Tested Gravitational Waves

    Full text link
    The observed microwave background anisotropies in combination with the theory of quantum mechanically generated cosmological perturbations predict a well measurable amount of relic gravitational waves in the frequency intervals tested by LISA and ground-based laser interferometers.Comment: revised, corrected, and slightly expanded version to be published in Classical and Quantum Gravity; 22 pages, 1 Postscript figure, Latex; Based on a talk presented at the First Internationsl LISA Symposium, 9 - 12 July 1996, RAL, U

    Ethical issues in the use of in-depth interviews: literature review and discussion

    Get PDF
    This paper reports a literature review on the topic of ethical issues in in-depth interviews. The review returned three types of article: general discussion, issues in particular studies, and studies of interview-based research ethics. Whilst many of the issues discussed in these articles are generic to research ethics, such as confidentiality, they often had particular manifestations in this type of research. For example, privacy was a significant problem as interviews sometimes probe unexpected areas. For similar reasons, it is difficult to give full information of the nature of a particular interview at the outset, hence informed consent is problematic. Where a pair is interviewed (such as carer and cared-for) there are major difficulties in maintaining confidentiality and protecting privacy. The potential for interviews to harm participants emotionally is noted in some papers, although this is often set against potential therapeutic benefit. As well as these generic issues, there are some ethical issues fairly specific to in-depth interviews. The problem of dual role is noted in many papers. It can take many forms: an interviewer might be nurse and researcher, scientist and counsellor, or reporter and evangelist. There are other specific issues such as taking sides in an interview, and protecting vulnerable groups. Little specific study of the ethics of in-depth interviews has taken place. However, that which has shows some important findings. For example, one study shows participants are not averse to discussing painful issues provided they feel the study is worthwhile. Some papers make recommendations for researchers. One such is that they should consider using a model of continuous (or process) consent rather than viewing consent as occurring once, at signature, prior to the interview. However, there is a need for further study of this area, both philosophical and empirical

    Minimax Current Density Coil Design

    Full text link
    'Coil design' is an inverse problem in which arrangements of wire are designed to generate a prescribed magnetic field when energized with electric current. The design of gradient and shim coils for magnetic resonance imaging (MRI) are important examples of coil design. The magnetic fields that these coils generate are usually required to be both strong and accurate. Other electromagnetic properties of the coils, such as inductance, may be considered in the design process, which becomes an optimization problem. The maximum current density is additionally optimized in this work and the resultant coils are investigated for performance and practicality. Coils with minimax current density were found to exhibit maximally spread wires and may help disperse localized regions of Joule heating. They also produce the highest possible magnetic field strength per unit current for any given surface and wire size. Three different flavours of boundary element method that employ different basis functions (triangular elements with uniform current, cylindrical elements with sinusoidal current and conic section elements with sinusoidal-uniform current) were used with this approach to illustrate its generality.Comment: 24 pages, 6 figures, 2 tables. To appear in Journal of Physics D: Applied Physic
    corecore