62 research outputs found
High rate, fast timing Glass RPC for the high CMS muon detectors
The HL-LHC phase is designed to increase by an order of magnitude the amount
of data to be collected by the LHC experiments. To achieve this goal in a
reasonable time scale the instantaneous luminosity would also increase by an
order of magnitude up to cms. The region of the
forward muon spectrometer () is not equipped with RPC stations.
The increase of the expected particles rate up to 2 kHz/cm ( including a
safety factor 3 ) motivates the installation of RPC chambers to guarantee
redundancy with the CSC chambers already present. The actual RPC technology of
CMS cannot sustain the expected background level. A new generation Glass-RPC
(GRPC) using low resistivity glass (LR) is proposed to equip at least the two
most far away of the four high eta muon stations of CMS. The design of small
size prototypes and the studies of their performances under high rate particles
flux is presented.Comment: 5 pages, 5 figures, proceeding for the conference VCI 201
4E-BP1 and 4E-BP2 double knockout mice are protected from aging-associated sarcopenia
Epub ahead of printBACKGROUND: Sarcopenia is the loss of muscle mass/function that occurs during the aging process. The links between mechanistic target of rapamycin (mTOR) activity and muscle development are largely documented, but the role of its downstream targets in the development of sarcopenia is poorly understood. Eukaryotic initiation factor 4E-binding proteins (4E-BPs) are targets of mTOR that repress mRNA translation initiation and are involved in the control of several physiological processes. However, their role in skeletal muscle is still poorly understood. The goal of this study was to assess how loss of 4E-BP1 and 4E-BP2 expression impacts skeletal muscle function and homeostasis in aged mice and to characterize the associated metabolic changes by metabolomic and lipidomic profiling. METHODS: Twenty-four-month-old wild-type and whole body 4E-BP1/4E-BP2 double knockout (DKO) mice were used to measure muscle mass and function. Protein homeostasis was measured ex vivo in extensor digitorum longus by incorporation of l-[U-(14) C]phenylalanine, and metabolomic and lipidomic profiling of skeletal muscle was performed by Metabolon, Inc. RESULTS: The 4E-BP1/2 DKO mice exhibited an increase in muscle mass that was associated with increased grip strength (P < 0.05). Protein synthesis was higher under both basal (+102%, P < 0.05) and stimulated conditions (+65%, P < 0.05) in DKO skeletal muscle. Metabolomic and complex lipid analysis of skeletal muscle revealed robust differences pertaining to amino acid homeostasis, carbohydrate abundance, and certain aspects of lipid metabolism. In particular, levels of most free amino acids were lower within the 4E-BP1/2 DKO muscle. Interestingly, although glucose levels were unchanged, differences were observed in the isobaric compound maltitol/lactitol (33-fold increase, P < 0.01) and in several additional carbohydrate compounds. 4E-BP1/2 depletion also resulted in accumulation of medium-chain acylcarnitines and a 20% lower C2/C0 acylcarnitine ratio (P < 0.01) indicative of reduced beta-oxidation. CONCLUSIONS: Taken together, these findings demonstrate that deletion of 4E-BPs is associated with perturbed energy metabolism in skeletal muscle and could have beneficial effects on skeletal muscle mass and function in aging mice. They also identify 4E-BPs as potential targets for the treatment of sarcopenia
Association of the PHACTR1/EDN1 genetic locus with spontaneous coronary artery dissection
Background:
Spontaneous coronary artery dissection (SCAD) is an increasingly recognized cause of acute coronary syndromes (ACS) afflicting predominantly younger to middle-aged women. Observational studies have reported a high prevalence of extracoronary vascular anomalies, especially fibromuscular dysplasia (FMD) and a low prevalence of coincidental cases of atherosclerosis. PHACTR1/EDN1 is a genetic risk locus for several vascular diseases, including FMD and coronary artery disease, with the putative causal noncoding variant at the rs9349379 locus acting as a potential enhancer for the endothelin-1 (EDN1) gene.
Objectives:
This study sought to test the association between the rs9349379 genotype and SCAD.
Methods:
Results from case control studies from France, United Kingdom, United States, and Australia were analyzed to test the association with SCAD risk, including age at first event, pregnancy-associated SCAD (P-SCAD), and recurrent SCAD.
Results:
The previously reported risk allele for FMD (rs9349379-A) was associated with a higher risk of SCAD in all studies. In a meta-analysis of 1,055 SCAD patients and 7,190 controls, the odds ratio (OR) was 1.67 (95% confidence interval [CI]: 1.50 to 1.86) per copy of rs9349379-A. In a subset of 491 SCAD patients, the OR estimate was found to be higher for the association with SCAD in patients without FMD (OR: 1.89; 95% CI: 1.53 to 2.33) than in SCAD cases with FMD (OR: 1.60; 95% CI: 1.28 to 1.99). There was no effect of genotype on age at first event, P-SCAD, or recurrence.
Conclusions:
The first genetic risk factor for SCAD was identified in the largest study conducted to date for this condition. This genetic link may contribute to the clinical overlap between SCAD and FMD
Energy Resolution Performance of the CMS Electromagnetic Calorimeter
The energy resolution performance of the CMS lead tungstate crystal electromagnetic calorimeter is presented. Measurements were made with an electron beam using a fully equipped supermodule of the calorimeter barrel. Results are given both for electrons incident on the centre of crystals and for electrons distributed uniformly over the calorimeter surface. The electron energy is reconstructed in matrices of 3 times 3 or 5 times 5 crystals centred on the crystal containing the maximum energy. Corrections for variations in the shower containment are applied in the case of uniform incidence. The resolution measured is consistent with the design goals
Recommended from our members
Research and Design of a Routing Protocol in Large-Scale Wireless Sensor Networks
无线传感器网络,作为全球未来十大技术之一,集成了传感器技术、嵌入式计算技术、分布式信息处理和自组织网技术,可实时感知、采集、处理、传输网络分布区域内的各种信息数据,在军事国防、生物医疗、环境监测、抢险救灾、防恐反恐、危险区域远程控制等领域具有十分广阔的应用前景。 本文研究分析了无线传感器网络的已有路由协议,并针对大规模的无线传感器网络设计了一种树状路由协议,它根据节点地址信息来形成路由,从而简化了复杂繁冗的路由表查找和维护,节省了不必要的开销,提高了路由效率,实现了快速有效的数据传输。 为支持此路由协议本文提出了一种自适应动态地址分配算——ADAR(AdaptiveDynamicAddre...As one of the ten high technologies in the future, wireless sensor network, which is the integration of micro-sensors, embedded computing, modern network and Ad Hoc technologies, can apperceive, collect, process and transmit various information data within the region. It can be used in military defense, biomedical, environmental monitoring, disaster relief, counter-terrorism, remote control of haz...学位:工学硕士院系专业:信息科学与技术学院通信工程系_通信与信息系统学号:2332007115216
Comportement thermique des composants de protection contre les effets indirects de la foudre.
Les diodes à avalanche de forte puissance, commercialisées en particulier sous la dénomination « transil », constituent une solution séduisante pour la protection de systèmes électroniques contre les effets indirects de la foudre. Ces effets apparaissent par couplage (résistif, inductif ou capacitif) lorsqu\u27un conducteur électrique se trouve au voisinage direct d\u27une masse métallique directement frappée par l\u27éclair. La mise en uvre rationnelle et fiable de la diode transil passe par un dimensionnement thermo-électrique aussi précis que possible. Le modèle proposé s\u27appuie sur des observations de la structure mécanique interne de la diode pour sa partie thermique et sur un schéma de type SPICE pour sa partie électrique. Le calcul des paramètres numériques du modèle ainsi que sa mise en uvre ont été validés par rapport à des données expérimentales. D\u27autre part, le comportement à long terme de la diode transil face aux effets indirects de la foudre est mal connu. La seconde partie de ce travail s\u27intéresse donc à la mise en évidence de signes avant-coureurs de fragilisation et de dégradation du composant dans ses conditions normales de fonctionnement. Un ensemble expérimental (générations d\u27impulsions de forte énergie et chaînes d\u27acquisition) a ainsi été développé. Les essais préliminaires ont montré un comportement différent de la diode soumise, d\u27une part, à une impulsion de fort courant et faible énergie et, d\u27autre part, à une impulsion à courant faible et forte énergie. Une étude systématique a ensuite montré les différences entre ces deux comportements. Dans le premier cas, la destruction apparaît de manière imprévisible sans signe précurseur mesurable. Dans le second cas, deux phénomènes conduisant à une augmentation caractéristique du courant de fuite inverse de la diode ont été observés et analysés. Ils apparaissent liés à des phénomènes d\u27avalanche locale et de mise en place de niveaux profonds au niveau de la jonction
- …