140 research outputs found
Thermal noise and optomechanical features in the emission of a membrane-coupled compound cavity laser diode
We demonstrate the use of a compound optical cavity as linear displacement
detector, by measuring the thermal motion of a silicon nitride suspended
membrane acting as the external mirror of a near-infrared Littrow laser diode.
Fluctuations in the laser optical power induced by the membrane vibrations are
collected by a photodiode integrated within the laser, and then measured with a
spectrum analyzer. The dynamics of the membrane driven by a piezoelectric
actuator is investigated as a function of air pressure and actuator
displacement in a homodyne configuration. The high Q-factor ( at mbar) of the fundamental mechanical mode at kHz guarantees a detection sensitivity high enough for direct measurement
of thermal motion at room temperature ( pm RMS). The compound cavity
system here introduced can be employed as a table-top, cost-effective linear
displacement detector for cavity optomechanics. Furthermore, thanks to the
strong optical nonlinearities of the laser compound cavity, these systems open
new perspectives in the study of non-Markovian quantum properties at the
mesoscale
Stretching graphene using polymeric micro-muscles
The control of strain in two-dimensional materials opens exciting
perspectives for the engineering of their electronic properties. While this
expectation has been validated by artificial-lattice studies, it remains
elusive in the case of atomic lattices. Remarkable results were obtained on
nanobubbles and nano-wrinkles, or using scanning probes; microscale strain
devices were implemented exploiting deformable substrates or external loads.
These devices lack, however, the flexibility required to fully control and
investigate arbitrary strain profiles. Here, we demonstrate a novel approach
making it possible to induce strain in graphene using polymeric micrometric
artificial muscles (MAMs) that contract in a controllable and reversible way
under an electronic stimulus. Our method exploits the mechanical response of
poly-methyl-methacrylate (PMMA) to electron-beam irradiation. Inhomogeneous
anisotropic strain and out-of-plane deformation are demonstrated and studied by
Raman, scanning-electron and atomic-force microscopy. These can all be easily
combined with the present device architecture. The flexibility of the present
method opens new opportunities for the investigation of strain and
nanomechanics in two-dimensional materials
An empirical correlation for the electric energy consumption of household refrigerator-freezers
Anisotropic straining of graphene using micropatterned SiN membranes
We use micro-Raman spectroscopy to study strain profiles in graphene
monolayers suspended over SiN membranes micropatterned with holes of
non-circular geometry. We show that a uniform differential pressure load
over elliptical regions of free-standing graphene yields measurable
deviations from hydrostatic strain conventionally observed in
radially-symmetric microbubbles. The top hydrostatic strain
we observe is estimated to be for in
graphene clamped to elliptical SiN holes with axis and .
In the same configuration, we report a splitting of
which is in good agreement with the calculated anisotropy for our device geometry. Our results are consistent with the
most recent reports on the Gr\"uneisen parameters. Perspectives for the
achievement of arbitrary strain configurations by designing suitable SiN holes
and boundary clamping conditions are discussed.Comment: 8 pages, 6 figure (including SI
NNLO Logarithmic Expansions and High Precision Determinations of the QCD background at the LHC: The case of the Z resonance
New methods of solutions of the DGLAP equation and their implementation
through NNLO in QCD are briefly reviewed. We organize the perturbative
expansion that describes in -space the evolved parton distributions in terms
of scale invariant functions, which are determined recursively, and logarithms
of the ratio of the running couplings at the initial and final evolution
scales. Resummed solutions are constructed within the same approach and involve
logarithms of more complex functions, which are given in the non-singlet case.
Differences in the evolution schemes are shown to be numerically sizeable and
intrinsic to perturbation theory. We illustrate these points in the case of
Drell-Yan lepton pair production near the Z resonance, analysis that can be
extended to searches of extra . We show that the reduction of the
NNLO cross section compared to the NLO prediction may be attributed to the NNLO
evolution.Comment: 5 pages, 2 figures. Talk given at QCD@work 2007, Martina Franca,
Italy, 16-20 June 2007. To be published in the American Institute of Physics
(AIP) conference proceeding
Liquid Biopsy in Rare Cancers: Lessons from Hemangiopericytoma
Hemangiopericytoma (HPT) is a rare mesenchymal tumor of fibroblastic type and for its rarity is poorly studied. The most common sites of metastatic disease in patients with intracranial HPT are the bone, liver, and lung, suggestive for an hematogenous dissemination; for this reason, we investigated, for the first time, the presence of circulating tumor cells (CTCs) in hemangiopericytoma patient by CellSearch® and SceenCell® devices. Peripheral blood samples were drawn and processed by CellSearch, an EpCAM-dependent device, and ScreenCell®, a device size based. We found nontypical CTCs by CellSearch system and the immunofluorescence analysis performed on CTCs isolate by ScreenCell demonstrated the presence of single CTCs and CTC clusters. The molecular characterization of single CTCs and CTC clusters, using antibodies directed against EpCAM, CD34, cytokeratins (8, 18, and 19), and CD45, showed a great heterogeneity in CTC clusters. We believe that the present study may open a new scenario in the rare tumors: the introduction of the liquid biopsy and the molecular characterization of circulating tumor cells could lead to personalized targeted treatments and also for rare tumors
Naso-Ethmoidal Phosphaturic Mesenchymal Tumor: A Rare Tumor Site for an Uncommon Paraneoplastic Syndrome
n/
A Nanocryotron Ripple Counter Integrated with a Superconducting Nanowire Single-Photon Detector for Megapixel Arrays
Decreasing the number of cables that bring heat into the cryocooler is a
critical issue for all cryoelectronic devices. Especially, arrays of
superconducting nanowire single-photon detectors (SNSPDs) could require more
than readout lines. Performing signal processing operations at low
temperatures could be a solution. Nanocryotrons, superconducting nanowire
three-terminal devices, are good candidates for integrating sensing and
electronics on the same technological platform as SNSPDs in photon-counting
applications. In this work, we demonstrated that it is possible to read out,
process, encode, and store the output of SNSPDs using exclusively
superconducting nanowires. In particular, we present the design and development
of a nanocryotron ripple counter that detects input voltage spikes and converts
the number of pulses to an -digit value. The counting base can be tuned from
2 to higher values, enabling higher maximum counts without enlarging the
circuit. As a proof-of-principle, we first experimentally demonstrated the
building block of the counter, an integer- frequency divider with
ranging from 2 to 5. Then, we demonstrated photon-counting operations at
405\,nm and 1550\,nm by coupling an SNSPD with a 2-digit nanocryotron counter
partially integrated on-chip. The 2-digit counter operated in either base 2 or
base 3 with a bit error rate lower than and a maximum count
rate of s. We simulated circuit architectures for
integrated readout of the counter state, and we evaluated the capabilities of
reading out an SNSPD megapixel array that would collect up to counts
per second. The results of this work, combined with our recent publications on
a nanocryotron shift register and logic gates, pave the way for the development
of nanocryotron processors, from which multiple superconducting platforms may
benefit
A Nanocryotron Memory and Logic Family
The development of superconducting electronics based on nanocryotrons has
been limited so far to few-device circuits, in part due to the lack of standard
and robust logic cells. Here, we introduce and experimentally demonstrate
designs for a set of nanocryotron-based building blocks that can be configured
and combined to implement memory and logic functions. The devices were
fabricated by patterning a single superconducting layer of niobium nitride and
measured in liquid helium on a wide range of operating points. The tests show
bit error rates with above margins up to MHz and the
possibility of operating under the effect of a perpendicular mT magnetic
field, with margins at MHz. Additionally, we designed and
measured an equivalent delay flip-flop made of two memory cells to show the
possibility of combining multiple building blocks to make larger circuits.
These blocks may constitute a solid foundation for the development of
nanocryotron logic circuits and finite-state machines with potential
applications in the integrated processing and control of superconducting
nanowire single-photon detectors.Comment: Submitted for publication in the Applied Physics Letters special
issue "Advances in Superconducting Logic", 8 pages, 5 figure
- …