Angle-resolved cathodoluminescence imaging polarimetry

Cathodoluminescence spectroscopy (CL) allows characterizing light emission in bulk and nanostructured materials and is a key tool in fields ranging from materials science to nanophotonics. Previously, CL measurements focused on the spectral content and angular distribution of emission, while the polarization was not fully determined. Here we demonstrate a technique to access the full polarization state of the cathodoluminescence emission, that is the Stokes parameters as a function of the emission angle. Using this technique, we measure the emission of metallic bullseye nanostructures and show that the handedness of the structure as well as nanoscale changes in excitation position induce large changes in polarization ellipticity and helicity. Furthermore, by exploiting the ability of polarimetry to distinguish polarized from unpolarized light, we quantify the contributions of different types of coherent and incoherent radiation to the emission of a gold surface, silicon and gallium arsenide bulk semiconductors. This technique paves the way for in-depth analysis of the emission mechanisms of nanostructured devices as well as macroscopic media.Comment: 8 figures. Includes supplementary informatio

Production of Radiobromide: new Nickel Selenide target and optimized separation by dry distillation

Introduction Radioisotopes of bromine are of special interest for nuclear medical applications. The positron emitting isotopes 75Br (T½ = 1.6 h; β+ = 75.5 %) and 76Br (T½ = 16.2 h; β+ = 57 %) have suitable decay properties for molecular imaging with PET, while the Auger electron emitters 77Br (T½ = 57.0 h) and 80mBr (T½ = 4.4 h) as well as the β−-emitter 82Br (T½ = 35.3 h) are useful for internal radiotherapy. 77Br is additionally suited for SPECT. The isotopes 75Br, 76Br and 77Br are usually produced at a cyclotron either by 3He and α-particle induced reactions on natural arsenic or by proton and deuteron induced reactions on enriched selenium isotopes [1]. As target mate-rials for the latter two reactions, earlier ele-mental selenium [2] and selenides of Cu, Ag, Mn, Mo, Cr, Ti, Pb and Sn were investigated [cf. 3–7]. Besides several wet chemical separation techniques the dry distillation of bromine from the irradiated targets was investigated, too [cf. 2, 4, 5]. However, the method needs further development. Nickel selenide was investigated as a promising target to withstand high beam currents, and the dry distillation technique for the isolation of n.c.a. radiobromine from the target was optimized. Material and Methods Crystalline Nickel-(II) selenide (0.3–0.5 g) was melted into a 0.5 mm deep cavity of a 1 mm thick Ni plate covered with a Ni grid. NiSe has a melting point of 959 °C. For development of targeting and the chemical separation, natural target material was used. Irradiations of NiSe were usually performed with protons of 17 MeV using a slanting water cooled target holder at the cyclotron BC1710 [8]. For radiochemical studies a beam current of 3 µA and a beam time of about 1 h were appropriate. To separate the produced no-carrier-added (n.c.a.) radiobromine from the target material a dry distillation method was chosen. The apparatus was developed on the basis of a dry distillation method for iodine [cf. 9,10] and optimized to obtain the bromine as n.c.a. [*Br]bromide in a small volume of sodium hydroxide solution. Changing different components of the apparatus, the dead volume could be minimized and an almost constant argon flow as carrier medium was realized. Various capillaries of platinum, stainless steel and quartz glass with different diameters and lengths were tested to trap the radiobromine. Results and Conclusion Nickel selenide proved successful as target material for the production of radiobromine by proton irradiation with 17 MeV protons. The target was tested so far only at beam currents up to 10 µA, but further investigations are ongoing. The optimized dry distillation procedure allows trapping of 80–90 % of the produced radiobromine in a capillary. For this purpose quartz glass capillaries proved to be most suitable. After rinsing the capillary with 0.1 M NaOH solution the activity can be nearly completely obtained in less than 100 µL solution as [*Br]bromide immediately useable for radiosynthesis. So, the overall separation yield was estimated to 81 ± 5 %. The radionuclidic composition and activity of the separated radiobromide was measured by γ-ray spectrometry. Due to the use of natural selenium the determination of the isotopic purity was not meaningful, but it could be shown that the radiobromine was free from other radioisotopes co-produced in the target material and the backing. The radiochemical purity as well as the specific activity were determined by radio ionchromatography. Further experiments using NiSe produced from nickel and enriched selenium are to be per-formed. The isotopic purity of the produced respective radiobromide, the production yield at high beam currents and the reusability of the target material have to be studied

Cross section measurements on 61Cu for proton beam monitoring above 20 MeV

Introduction All experimental studies involving charged particle induced nuclear reactions require a precise knowledge of monitor reactions. A number of well described proton induced monitor reactions exist in the lower energy range [1], which is covered by most medical cyclotrons. Concerning proton energies above 20 MeV, however, the accuracy of the monitor reactions declines as cross section data becomes scarcer. Furthermore, the growing interest in precise determination of projectile energies by comparing of ratios of monitor reaction cross sections demands new measurements and evaluations of known data for high threshold monitor radionuclides. In this work cross section measurements on the formation of 61Cu were done and energy de-pendent radionuclide ratios were calculated. Material and Methods For investigation of the natCu(p,x)61Cu reaction copper foils of natural isotopic composition (Goodfellow Ltd.) were irradiated. The targets were of 10 and 20 μm thickness, having a diameter of 15 mm. Proton bombardments up to 45 MeV incident energy were done in the stacked-foil arrangement at the accelerator JULIC of the Nuclear Physics Institute (IKP) of the Forschungszentrum Jülich. In addition to an internal irradiation possibility the cyclotron is equipped with an external target station which was used for most experiments. It can adapt standard and slanting solid target holders and is equipped with a water cooled four sector collimator and additional helium cooling of the entry foil. Several irradiations were executed. In each stack, besides copper samples, aluminium absorbers and additional nickel monitor foils were also placed, the latter for the determination of the respective beam current. The produced radioactivity of 61Cu was analysed non-destructively using HPGe γ-ray detectors (EG&G Ortec). Results and Conclusion Reaction cross sections of the natCu(p,x)61Cu process up to 45 MeV were measured and com-pared with existing data from the literature (FIG. 2). Except for the data of Williams et al. our results are in good agreement, showing a maxi-mum of about 165 mbarn at 37.5 MeV proton energy. The overall uncertainty of the new cross section data is between 8 and 10 %. In FIG. 3, the excitation functions of the relevant monitor reactions on Cu are shown. In combination with the excitation function of the natCu(p,xn)62Zn reaction, isotope ratios were calculated which can be used for determination of the proton energy within a target stack in the energy range of 22–40 MeV as described by Piel et al. [3]. FIGURE 4 shows the cross section ratio in dependence of the proton energy. Above this energy, 65Zn could be used to generate isotope ratios for energy determination, although the long half-life (T½ = 244.3 d) of that radionuclide may be a problem. Additional cross section measurements are planned in order to further strengthen the data base of this potential monitor reaction. The results of this work shall be evaluated in the framework of an ongoing Coordinated Research Project of the IAEA

Antibiotics for coughing in general practice: a questionnaire study to quantify and condense the reasons for prescribing

BACKGROUND: Antibiotics are being overprescribed in ambulant care, especially for respiratory tract infections (RTIs). Gaining insight into the actual reasons for prescribing remains important for the design of effective strategies to optimise antibiotic prescribing. We aimed to determine items of importance for the antibiotic prescribing decision and to make them operational for an intervention trial. METHODS: A postal questionnaire based upon focus group findings was sent to 316 Flemish general practitioners (GPs). On a verbal rating scale the GPs scored to what extent they consider the questionnaire items in decision making in case of suspected RTI in a coughing patient and how strongly the items support or counter antibiotic treatment. Factor analysis was used to condense the data. The relative importance of the yielded operational factors was assessed using Wilcoxon Matched Pairs test. RESULTS: 59.5% completed the study. Response group characteristics (mean age: 42.8 years; 65.9% men) approximated that of all Flemish GPs. Participants considered all the items included in the questionnaire: always the operational factor 'lung auscultation', often 'whether or not there is something unusual happening' – both medical reasons – and to a lesser extent 'non-medical reasons' (P < 0.001). Non-medical as well as medical reasons support antibiotic treatment, but non-medical reasons to a lesser extent (P < 0.001). CONCLUSION: This study quantified, condensed and confirmed the findings of previous focus group research. Practice guidelines and interventions to optimise antibiotic prescribing have to take non-medical reasons into account

Learning to Sieve: Prediction of Grading Curves from Images of Concrete Aggregate

A large component of the building material concrete consists of aggregate with varying particle sizes between 0.125 and 32 mm. Its actual size distribution significantly affects the quality characteristics of the final concrete in both, the fresh and hardened states. The usually unknown variations in the size distribution of the aggregate particles, which can be large especially when using recycled aggregate materials, are typically compensated by an increased usage of cement which, however, has severe negative impacts on economical and ecological aspects of the concrete production. In order to allow a precise control of the target properties of the concrete, unknown variations in the size distribution have to be quantified to enable a proper adaptation of the concrete's mixture design in real time. To this end, this paper proposes a deep learning based method for the determination of concrete aggregate grading curves. In this context, we propose a network architecture applying multi-scale feature extraction modules in order to handle the strongly diverse object sizes of the particles. Furthermore, we propose and publish a novel dataset of concrete aggregate used for the quantitative evaluation of our method