Micarta Propellers III : General Description of the Design

The design of propellers made of Micarta is discussed. The advantages of the material are noted, especially as compared with wood. The design changes necessitated by the use of Micarta are discussed with reference to the hub boss, the narrowing of the blade tips, the thinning of the blades, the angles of the leading and trailing edges, and the adjustment of the pitch. Results of flight tests show that the Micarta propeller gave a top speed of 2 miles per hour more than the wooden propeller while turning about 120 r.p.m slower, with about the same rate of climb. At top speed, the Micarta propeller shows an improvement of about 7 percent in fuel economy, although the plane is flying 2 miles per hour faster

Micarta propellers IV : technical methods of design

A description is given of the methods used in design of Micarta propellers. The most direct method for working out the design of a Micarta propeller is to start with the diameter and blade angles of a wooden propeller suited for a particular installation and then to apply one of the plan forms suitable for Micarta propellers. This allows one to obtain the corresponding blade widths and to then use these angles and blade widths for an aerodynamic analysis

Micarta propellers I : materials

Here, values for tension, compression edgewise of laminations, and transverse flatwise of laminations are given for Micarta made with various kinds of sheet material. The corresponding values for white oak are given for comparison. It was found by destructive and service tests that Micarta made with a good grade of cotton duck will give satisfactory service with most designs. In propellers having detachable blades, it is desirable that the root of the blade be of a small cross section to decrease the weight of the metal hub. Here the use of the special fabric or wood veneer offers advantages due to greater tensile strength. These materials, especially the wood veneer, produce stiffer blades than duck. This is also a value in controllable and reversible pitch designs where it is desirable that the plan form of the blades be symmetrical

Cooperative orbital ordering and Peierls instability in the checkerboard lattice with doubly degenerate orbitals

It has been suggested that the metal-insulator transitions in a number of spinel materials with partially-filled t_2g d-orbitals can be explained as orbitally-driven Peierls instabilities. Motivated by these suggestions, we examine theoretically the possibility of formation of such orbitally-driven states within a simplified theoretical model, a two-dimensional checkerboard lattice with two directional metal orbitals per atomic site. We include orbital ordering and inter-atom electron-phonon interactions self-consistently within a semi-classical approximation, and onsite intra- and inter-orbital electron-electron interactions at the Hartree-Fock level. We find a stable, orbitally-induced Peierls bond-dimerized state for carrier concentration of one electron per atom. The Peierls bond distortion pattern continues to be period 2 bond-dimerization even when the charge density in the orbitals forming the one-dimensional band is significantly smaller than 1. In contrast, for carrier density of half an electron per atom the Peierls instability is absent within one-electron theory as well as mean-field theory of electron-electron interactions, even for nearly complete orbital ordering. We discuss the implications of our results in relation to complex charge, bond, and orbital-ordering found in spinels.Comment: 8 pages, 5 figures; revised versio

Growth and Fecundity of Several Weed Species in Corn and Soybean

Do weeds that emerge later in the season justify additional control costs\u27? If crop yield is not reduced or few or no seeds arc added to the soil seed hank, then no control may he needed. Eight weed species were sown in corn (Zea mays L.) and soybean I Glycine max (L.) Mcrr.l (i) before crop emergence, (ii) at crop emergence, (iii) at V-1, and (iv) at V-2 stages of crop growth in 2002 and 2003. Weed seed was sown close to the crop row and thinned to 1.3 plants m 2• Weed growth and fecundity were influenced by species, time of planting, and year. Only barnyarclgrass (Echinochloa crus-galli L.), rcclroot pigwced (Amaranthus retniflexus L.), and vclvetlcaf (Abutilon theophrasti L.) survived to produce seed. Plants from the pre-emergence seeding had the largest canopy and produced the most seeds. Harnyardgrass had maximum canopy cover in early .July in corn and late .Inly in soybean hut only produced seed in corn. Rcclroot pigweecl and vclvctleaf had maximum canopy cover in late August or midSeptember, and some plants from most seeding elates survived and produced seed in both corn and soybean. However, plants that grew from seed sown at V-1 and V-2 crnp grnwth stages did not reduce yield or biomass of adjacent crop plants, had low fecundity, and may not warrant treatment. Control may be necessary, however, to prevent yield losses if weeds arc present at high densities or to prevent establishment of uncommon species

The longitudinal thickness of air-shower fronts

Linsely (1983) has proposed a technique for the detection and analysis of air showers at large distances from the shower axis based on a measurement of the shower front thickness and the assumption that this thickness is closely related to the core distance. Some of the problems involved with realizing such a technique were investigated, and some related observations are reported. The practical problems of how consistent the measurements of the shower front would be, how one would use the measurement, and how the rate of triggered events would depend on the minimum pulse width required are studied

Statistical analysis of general aviation VG-VGH data

To represent the loads spectra of general aviation aircraft operating in the Continental United States, VG and VGH data collected since 1963 in eight operational categories were processed and analyzed. Adequacy of data sample and current operational categories, and parameter distributions required for valid data extrapolation were studied along with envelopes of equal probability of exceeding the normal load factor (n sub z) versus airspeed for gust and maneuver loads and the probability of exceeding current design maneuver, gust, and landing impact n sub z limits. The significant findings are included

Determinants of Farm Productivity in Africa: A Synthesis of Four Case Studies

Productivity Analysis, Downloads July 2008 - July 2009: 20,

Geostatistical Characterization of the Spatial Distribution of Adult Corn Rootworm (Coleoptera: Chrysomelidae) Emergence

Geostatistical methods were used to characterize spatial variability in western ( Diabrotica virgifera virgifera LeConte) and northern ( Diabrotica barberi Smith & Lawrence) corn rootworm adult emergence patterns. Semivariograms were calculated for adult emergence density of corn rootworm populations in fields of continuous corn and rotated (corn/soybean) corn. Adult emergence densities were generally greater for northern corn rootworms than for western corn rootworms. The spatial structures of the adult rootworm emergence were aggregated as described by spherical spatial models for western corn rootworm and exponential models for northern corn rootworm. Range of spatial dependence varied from 180 to 550 m for western corn rootworm and 172 to 281 m for northern corn rootworm. Semivariograrn models were used to produce contour density maps of adult populations in the fields, based on grid sampling of actual emerging adult populations