12 research outputs found
Extraction of vanillin using ionic-liquid-based aqueous two-phase systems
To explore proper extractive solvents and to design an optimized separation process it is highly imperative to understand the molecular-based phenomena governing the solutes partitioning. Moreover, the development of new techniques for the biomolecules separation and purification, while maintaining their functional characteristics unchanged, is still ongoing. Therefore, in this work, the partition coefficients of vanillin, a compound with well-known organoleptic properties, were determined using improved ionic-liquid-based aqueous two-phase systems (ATPS). Three main parameters were evaluated through the vanillin partitioning process: the ionic liquid (IL) cation and anion structure, the temperature of equilibrium and the available concentration of vanillin in the global system. In all systems and conditions tested, vanillin preferentially migrates for the IL-rich phase. In addition, the three studied parameters largely influence the vanillin partitioning. In an attempt to elucidate the thermodynamics of the partitioning process, the standard molar thermodynamic functions of transfer of vanillin were also determined based on the temperature dependence data. These data indicate that the partition of vanillin results from an interplay between enthalpic and entropic contributions where both the IL anion and more complex cations play an essential role. Moreover, viscosities and densities of both aqueous phases were experimentally measured at the mass fraction compositions for which the partition coefficients were determined. The results gathered in this work indicate that IL-based ATPS can be further employed in the extraction and purification of vanillin from different matrices, as confirmed by the large partition coefficients obtained and improved low viscosity systems. (C) 2010 Elsevier B.V. All rights reserved.BIIPP projec - QREN 11551FCT - SFRH/BPD/41781/200
Structural and Functional insights into the catalytic mechanism of the Type II NADH:quinone oxidoreductase family
Type II NADH:quinone oxidoreductases (NDH-2s) are membrane proteins involved in respiratory chains. These proteins contribute indirectly to the establishment of the transmembrane difference of electrochemical potential by catalyzing the reduction of quinone by oxidation of NAD(P)H. NDH-2s are widespread enzymes being present in the three domains of life. In this work, we explored the catalytic mechanism of NDH-2 by investigating the common elements of all NDH-2s, based on the rationale that conservation of such elements reflects their structural/functional importance. We observed conserved sequence motifs and structural elements among 1762 NDH-2s. We identified two proton pathways possibly involved in the protonation of the quinone. Our results led us to propose the first catalytic mechanism for NDH-2 family, in which a conserved glutamate residue, E(172) (in NDH-2 from Staphylococcus aureus) plays a key role in proton transfer to the quinone pocket. This catalytic mechanism may also be extended to the other members of the two-Dinucleotide Binding Domains Flavoprotein (tDBDF) superfamily, such as sulfide:quinone oxidoreductases
The key role of glutamate 172 in the mechanism of type II NADH:quinone oxidoreductase of Staphylococcus aureus
Extraction of Biomolecules Using Phosphonium-Based Ionic Liquids + K3PO4 Aqueous Biphasic Systems
Aqueous biphasic systems (ABS) provide an alternative and efficient approach for the extraction, recovery and purification of biomolecules through their partitioning between two liquid aqueous phases. In this work, the ability of hydrophilic phosphonium-based ionic liquids (ILs) to form ABS with aqueous K3PO4 solutions was evaluated for the first time. Ternary phase diagrams, and respective tie-lines and tie-lines length, formed by distinct phosphonium-based ILs, water, and K3PO4 at 298 K, were measured and are reported. The studied phosphonium-based ILs have shown to be more effective in promoting ABS compared to the imidazolium-based counterparts with similar anions. Moreover, the extractive capability of such systems was assessed for distinct biomolecules (including amino acids, food colourants and alkaloids). Densities and viscosities of both aqueous phases, at the mass fraction compositions used for the biomolecules extraction, were also determined. The evaluated IL-based ABS have been shown to be prospective extraction media, particularly for hydrophobic biomolecules, with several advantages over conventional polymer-inorganic salt ABS
Hydrogen bond basicity of ionic liquids and molar entropy of hydration of salts as major descriptors in the formation of aqueous biphasic systems
Aqueous biphasic systems (ABS) composed of ionic liquids (ILs) and conventional salts have been largely
investigated and successfully used in separation processes, for which the determination of the
corresponding ternary phase diagrams is a prerequisite. However, due the large number of ILs that can
be prepared and their high structural versatility, it is impossible to experimentally cover and characterize
all possible combinations of ILs and salts that may form ABS. The development of tools for the
prediction and design of IL-based ABS is thus a crucial requirement. Based on a large compilation of
experimental data, a correlation describing the formation of IL-based ABS is shown here, based on the
hydrogen-bonding interaction energies of ILs (EHB) obtained by the COnductor-like Screening MOdel
for Real Solvents (COSMO-RS) and the molar entropy of hydration of the salt ions. The ability of the
proposed model to predict the formation of novel IL-based ABS is further ascertained.publishe
A critical assessment of the mechanisms governing the formation of aqueous biphasic systems composed of protic ionic liquids and polyethylene glycol
An extensive study on the formation of aqueous biphasic systems (ABS) using aqueous solutions of protic ionic liquids (PILs) and polyethylene glycol (PEG) was performed in order to understand the mechanisms underlying the phase separation. Aqueous solutions of PEG polymers with different molecular weights (600, 1000, 2000, and 3400 g mol{\textminus}1) and several N-alkyl-, dialkyl-, and trialkyl-ammonium salts of acetate, propanoate, butanoate, hexanoate and octanoate were prepared and their ability to form ABS at several temperatures assessed. The ternary liquid{\textendash}liquid phase diagrams were determined at several temperatures, as well as binary PIL (or salt)-PEG-1000 and salt-water solubility data to better clarify the mechanisms responsible for the phase separation. All data gathered indicate that the formation of PEG{\textendash}PIL-based ABS is mainly governed by the PIL{\textendash}PEG mutual interactions, where PILs with a higher solubility in the polymer exhibit a lower aptitude to form ABS displaying thus a smaller biphasic region, for which a direct correlation was identified. The effects of the molecular weight and temperature of the polymer were also addressed. The increase of the PEG hydrophobicity or molecular weight favours the phase separation, whereas the effect of temperature was found to be more complex and dependent on the nature of the PIL, with an increase or decrease of the biphasic regime with an increase in temperature
Deep Eutectic Solvents as Efficient Media for the Extraction and Recovery of Cynaropicrin from Cynara cardunculus L. Leaves
In recent years a high demand for natural ingredients with nutraceutical properties has been witnessed, for which the development of more environmentally-friendly and cost-efficient extraction solvents and methods play a primary role. In this perspective, in this work, the application of deep eutectic solvents (DES), composed of quaternary ammonium salts and organic acids, as alternative solvents for the extraction of cynaropicrin from Cynara cardunculus L. leaves was studied. After selecting the most promising DES, their aqueous solutions were investigated, allowing to obtain a maximum cynaropicrin extraction yield of 6.20 wt %, using 70 wt % of water. The sustainability of the extraction process was further optimized by carrying out several extraction cycles, reusing either the biomass or the aqueous solutions of DES. A maximum cynaropicrin extraction yield of 7.76 wt % by reusing the solvent, and of 8.96 wt % by reusing the biomass, have been obtained. Taking advantage of the cynaropicrin solubility limit in aqueous solutions, water was added as an anti-solvent, allowing to recover 73.6 wt % of the extracted cynaropicrin. This work demonstrates the potential of aqueous solutions of DES for the extraction of value-added compounds from biomass and the possible recovery of both the target compounds and solvents
Hydrogenases in Desulfovibrio vulgaris Hildenborough: structural and physiologic characterisation of the membrane-bound [NiFeSe] hydrogenase
The genome of Desulfovibrio vulgaris Hildenborough (DvH) encodes for six hydrogenases (Hases), making it an interesting organism to study the role of these proteins in sulphate respiration. In this work we address the role of the [NiFeSe] Hase, found to be the major Hase associated with the cytoplasmic membrane. The purified enzyme displays interesting catalytic properties, such as a very high H2 production activity, which is dependent on the presence of phospholipids or detergent, and resistance to oxygen inactivation since it is isolated aerobically in a Ni(II) oxidation state. Evidence was obtained that the [NiFeSe] Hase is post-translationally modified to include a hydrophobic group bound to the N-terminal, which is responsible for its membrane association. Cleavage of this group originates a soluble, less active form of the enzyme. Sequence analysis shows that [NiFeSe] Hases from Desulfovibrionacae form a separate family from the [NiFe] enzymes of these organisms, and are more closely related to [NiFe] Hases from more distant bacterial species that have a medial [4Fe4S]2+/1+ cluster, but not a selenocysteine. The interaction of the [NiFeSe] Hase with periplasmic cytochromes was investigated and is similar to the [NiFe]1 Hase, with the Type I cytochrome c3 as the preferred electron acceptor. A model of the DvH [NiFeSe] Hase was generated based on the structure of the Desulfomicrobium baculatum enzyme. The structures of the two [NiFeSe] Hases are compared with the structures of [NiFe] Hases, to evaluate the consensual structural differences between the two families. Several conserved residues close to the redox centres were identified, which may be relevant to the higher activity displayed by [NiFeSe] Hases
Extended scale for the hydrogen-bond basicity of ionic liquids
In the past decade, ionic liquids (ILs) have been the focus of intensive research regarding their use as potential and alternative solvents in many chemical applications. Targeting their effectiveness, recent investigations have attempted to establish polarity scales capable of ranking ILs according to their chemical behaviours. However, some major drawbacks have been found since polarity scales only report relative ranks because they depend on the set of probe dyes used, and they are sensitive to measurement conditions, such as purity levels of the ILs and procedures employed. Due to all these difficulties it is of crucial importance to find alternative and/or predictive methods and to evaluate them as a priori approaches capable of providing the chemical properties of ILs. Furthermore, the large number of ILs available makes their experimental characterization, usually achieved by a trial and error methodology, burdensome. In this context, we firstly evaluated COSMO-RS, COnductor-like Screening MOdel for Real Solvents, as an alternative tool to estimate the hydrogen-bond basicity of ILs. After demonstrating a straight-line correlation between the experimental hydrogen-bond basicity values and the COSMO-RS hydrogen-bonding energies in equimolar cation-anion pairs, an extended scale for the hydrogen-bond accepting ability of IL anions is proposed here. This new ranking of the ILs' chemical properties opens the possibility to pre-screen appropriate ILs (even those not yet synthesized) for a given task or application