Experimental Investigation of Pool Boiling Heat Transfer Enhancement in Microgravity in the Presence of Electric Fields

Boiling is an effective mode of heat transfer since high heat flux levels are possible driven by relatively small temperature differences. The high heat transfer coefficients associated with boiling have made the use of these processes increasingly attractive to aerospace engineering. Applications of this type include compact evaporators in the thermal control of aircraft avionics and spacecraft environments, heat pipes, and use of boiling to cool electronic equipment. In spite of its efficiency, cooling based on liquid-vapor phase change processes has not yet found wide application in aerospace engineering due to specific problems associated with the low gravity environment. After a heated surface has reached the superheat required for the initiation of nucleate boiling, bubbles will start forming at nucleation sites along the solid interface by evaporation of the liquid. Bubbles in contact with the wall will continue growing by this mechanism until they detach. In terrestrial conditions, bubble detachment is determined by the competition between body forces (e.g. buoyancy) and surface tension forces that act to anchor the bubble along the three phase contact line. For a given body force potential and a balance of tensions along the three phase contact line, bubbles must reach a critical size before the body force can cause them to detach from the wall. In a low gravity environment the critical bubble size for detachment is much larger than under terrestrial conditions, since buoyancy is a less effective means of bubble removal. Active techniques of heat transfer enhancement in single phase and phase change processes by utilizing electric fields have been the subject of intensive research during recent years. The field of electrohydrodynamics (EHD) deals with the interactions between electric fields, flow fields and temperature fields. Previous studies indicate that in terrestrial applications nucleate boiling heat transfer can be increased by a factor of 50 as compared to values obtained for the same system without electric fields. Imposing an external electric field holds the promise to improve pool boiling heat transfer in low gravity, since a phase separation force other than gravity is introduced. The goal of our research is to experimentally investigate the potential of EHD and the mechanisms responsible for EHD heat transfer enhancement in boiling in low gravity conditions

Quantitative Visualization and Detection of Skin Cancer Using Dynamic Thermal Imaging

In 2010 approximately 68,720 melanomas will be diagnosed in the US alone, with around 8,650 resulting in death 1. To date, the only effective treatment for melanoma remains surgical excision, therefore, the key to extended survival is early detection 2,3. Considering the large numbers of patients diagnosed every year and the limitations in accessing specialized care quickly, the development of objective in vivo diagnostic instruments to aid the diagnosis is essential. New techniques to detect skin cancer, especially non-invasive diagnostic tools, are being explored in numerous laboratories. Along with the surgical methods, techniques such as digital photography, dermoscopy, multispectral imaging systems (MelaFind), laser-based systems (confocal scanning laser microscopy, laser doppler perfusion imaging, optical coherence tomography), ultrasound, magnetic resonance imaging, are being tested. Each technique offers unique advantages and disadvantages, many of which pose a compromise between effectiveness and accuracy versus ease of use and cost considerations. Details about these techniques and comparisons are available in the literature 4

HIGH TEMPERATURE HEAT EXCHANGERS FOR NUCLEAR APPLICATIONS

ABSTRACT Many nuclear engineering applications, current and future, require heat exchangers operating at high temperatures. The operating conditions and performance requirements of these heat exchangers present special design challenges. This paper considers these challenges with respect to a simple heat exchanger design manufactured of a novel carbon material. Heat transfer and effectiveness calculations are performed for several parametric studies regarding heat exchanger parameters. These results are used to better understand the design challenges of high temperature heat exchangers as well as provide a starting point for future optimization work on more complex heat exchanger designs

Selection of working fluids for electrohydrodynamic experiments in terrestrial conditions and microgravity

International audienceElectrohydrodyamic (EHD) heat transfer enhancement and flow control methods are becoming increasingly popular in engineering science and applica- tions both in terrestrial and low gravity applications. The correct choice of the working fluid is essential for the design and performance of EHD hardware and can pose challenge because some working fluids with favorable EHD properties can be unstable or hazardous. In this paper key properties and criteria for the selection of working fluids for single-phase (liquid) as well as gas-liquid and vapor-liquid two-phase electrohydrodynamic experiments and applications are discussed. Key physical and electrical properties as well as environmental and safety issues are reviewed for the sample fluids PF-5052, FC-72, R141b, cyclohexane and pure water. Microgravity experiments impose additional demands on the selection of the working fluids. Some of these demands are addressed by contrasting bubble dimensions and shapes at detachment, estimated using a simple thermodynamic model, in terrestrial and microgravity conditions with and without electric fields. Data are obtained using a simplified analytical model and verified experimentally

Modeling of bubble detachment in reduced gravity under the influence of electric fields and experimental verification.

A simple model for predicting bubble volume and shape at detachment in reduced gravity under the influence of electric fields is described in the paper. The model is based on relatively simple thermodynamic arguments and relies on and combines several models described in the literature. It accounts for the level of gravity and the magnitude of the electric field. For certain conditions of bubble development the properties of the bubble source are also considered. Computations were carried out for a uniform unperturbed electric field for a range of model parameters, and the significance of model assumptions and simplifications is discussed for the particular method of bubble formation. Experiments were conducted in terrestrial conditions and reduced gravity (during parabolic flights in NASA's KC-135 aircraft) by injecting air bubbles through an orifice into the electrically insulating working fluid, PF5052. Bubble shapes visualized experimentally were compared with model predictions. Measured data and model predictions show good agreement. The results suggest that the model can provide quick engineering estimates concerning bubble formation for a range of conditions (both for formation at an orifice and boiling) and such a model reduces the need for complex and expensive numerical simulations for a certain applications

Bubble Detachment in Variable Gravity Under the Influence of a Non-Uniform Electric Field

The objective of the study reported in this paper is to investigate the effects of variable, reduced gravity on the formation and detachment behavior of individual air bubbles under the influence of a non-uniform electric field. For this purpose, variable gravity experiments were carried out in parabolic nights. The non-uniform electric field was generated by a spherical electrode and a plate electrode. The effect of the magnitude of the non-uniform electric field and gravity level on bubble formation, development and detachment at an orifice was investigated. An image processing code was developed that allows the measurement of bubble volume, dimensions and contact angle at detachment. The results of this research can be used to explore the possibility of enhancing boiling heat transfer in the variable and low gravity environments by substituting the buoyancy force with a force induced by the electric field. The results of experiments and measurements indicate that the level of gravity significantly affects bubble shape, size and frequency. The electric field magnitude also influences bubble detachment, however, its impact is not as profound as that of variable gravity for the range of electric field magnitudes investigated in the present study