Search for compact sources of cosmic photons above 200 TeV

Journal ArticleFrom April 1988 to February 1990 we used a two-level array of scintillators to search in the cosmic radiation for compact sources of y rays above 200 TeV. Counters on the surface measured the size and direction of extensive air showers while counters buried 3 m below ground measured their muon content. Showers induced by y rays are expected to have many fewer muons than those initiated by hadrons so the selection of muon-poor showers should greatly reduce the background of hadronic showers. Three objects, Cygnus X-3, the Crab nebula, and Hercules X-l, were examined in detail. Searches were made on short and long time scales and source periodicity was used, where applicable, to enhance any possible signals. We found no evidence for any compact sources

Search for compact sources of cosmic photons above 200 TeV

Journal ArticleFrom April 1988 to February 1990 we used a two-level array of scintillators to search in the cosmic radiation for compact sources of y rays above 200 TeV. Counters on the surface measured the size and direction of extensive air showers while counters buried 3 m below ground measured their muon content. Showers induced by y rays are expected to have many fewer muons than those initiated by hadrons so the selection of muon-poor showers should greatly reduce the background of hadronic showers

A model-based rams estimation methodology for innovative aircraft on-board systems supporting mdo applications

The reduction of aircraft operating costs is one of the most important objectives addressed by aeronautical manufactures and research centers in the last decades. In order to reach this objective, one of the current ways is to develop innovative on-board system architectures, which can bring to lower fuel and maintenance costs. The development and optimization of these new aircraft on-board systems can be addressed through a Multidisciplinary Design Optimization (MDO) approach, which involves different disciplines. One relevant discipline in this MDO problem is Reliability, Availability, Maintainability and Safety (RAMS), which allows the assessment of the reliability and safety of aircraft systems. Indeed the development of innovative systems cannot comply with only performance requirements, but also with reliability and safety constraints. Therefore, the RAMS discipline plays an important role in the development of innovative on-board systems. In the last years, different RAMS models and methods have been defined, considering both conventional and innovative architectures. However, most of them rely on a document-based approach, which makes difficult and time consuming the use of information gained through their analysis to improve system architectures. On the contrary, a model-based approach would make easier and more accessible the study of systems reliability and safety, as explained in several studies. Model Based Systems Engineering (MBSE) is an emerging approach that is mainly used for the design of complex systems. However, only a few studies propose this approach for the evaluation of system safety and reliability. The aim of this paper is therefore to propose a MBSE approach for model-based RAMS evaluations. The paper demonstrates that RAMS models can be developed to quickly and more effectively assess the reliability and safety of conventional and innovative on-board system architectures. In addition, further activities for the integration of the model-based RAMS methodology within MDO processes are described in the paper

ASSESSMENT OF NEW TECHNOLOGIES IN A MULTI-DISCIPLINARY DESIGN ANALYSIS AND OPTIMIZATION ENVIRONMENT INCLUDING RAMS AND COST DISCIPLINES

The aim of the present paper is to assess the effect of new technologies on the whole aircraft product including its costs, reliability and maintainability characteristics. Several studies have been conducted dealing with the preliminary evaluation of Reliability, Availability, Maintainability and Safety (RAMS) of conventional aircraft. They provide a very effective method to preliminary estimate RAMS characteristics but their employment is not completely suitable for the analysis of unconventional configurations adopting new technologies. This paper aims at evaluating how the aircraft costs and RAMS characteristics are affected by new structures material, natural laminar flow wing technology and unconventional actuator system (electro-hydrostatic actuators), hence an update of the state of the art models is needed. This evaluation is performed by means of a setup and execution of a Multidisciplinary Design Analysis and Optimization (MDAO) workflow. The MDAO environment includes the aircraft conceptual design, aircraft performance, structure design, engine design, on-board systems design, RAMS and maintenance cost modules. The RAMS module is used to obtain the failure rates and maintenance effort (in terms of maintenance man hour per flight hour) at subsystem level. The cost module is based on a new maintenance cost model able to estimate the operating cost of the different aircraft variants. The selected new technologies are applied to a regional jet developed within the framework of AGILE research project. For each technology, a different variant of this aircraft is analyzed. Results show that some important saves are reached both in terms of maintenance and fuel cost when new technologies are applied

Experimental Results of Neutron Fluence Outside an Iron Shield in the Forward Direction

This work represents the first systematic study at a high energy accelerator of the depth dependence of neutron fluence in longitudinal shielding

Design of the strut braced wing aircraft in the agile collaborative MDO framework

The paper describes the deployment of the AGILE Development Framework to investigate the Strut Braced Wing aircraft configuration. The design process consists of a multilevel multidisciplinary architecture, progressing from the initial conceptual synthesis to the physics based analysis. All the main disciplinary domains, including on board system design and cost assessment, are accounted for in the assembled workflow. Due to the specific characteristics of the Strut Braced Wing configuration, the aeroelastic analysis is the main focus of the study and it is addressed at both high and low fidelity levels. The integration of the engine-wing system is also included in the design process. All the design competences, which are hosted at the different partners, communicate via CPACS (Common Parametric Aircraft Configuration Schema) data schema. All the results generated, including the multidisciplinary design process itself, will be published and made available as part of the AGILE Overall Aircraft Design database

A search for anomalously heavy isotopes of low Z nuclei

We present preliminary results of a search for anomalously heavy isotopes of certain light elements using an electrostatic charged particle spectrometer in conjunction with the MP tandem accelerator facility at the Nuclear Structure Research Laboratory of the University of Rochester. New limits for the existence of anomalous, heavy isotopes (100–10,000 amu) in ordinary, terrestrial Li, Be, B and F samples and enriched H2, C13, and O18 samples are reported.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87394/2/1143_1.pd

Collaborative Design of a Business Jet Family Using the AGILE 4.0 MBSE Environment

This paper presents the collaborative model-based design of a business jet family. In family design, a trade-off is made between aircraft performance, reducing fuel burn, and commonality, reducing manufacturing costs. The family is designed using Model-Based Systems Engineering (MBSE) methods developed in the AGILE 4.0 project. The EC-funded AGILE 4.0 project extends the scope of the preliminary aircraft design process to also include systems engineering phases and new design domains like manufacturing, maintenance, and certification. Stakeholders, needs, requirements, and architecture models of the business jet family are presented. Then, the collaborative Multidisciplinary Design Analysis and Optimization (MDAO) capabilities are used to integrate various aircraft design disciplines, including overall aircraft design, onboard systems design, wing structural sizing, tailplane sizing, mission analysis, and cost estimation. Decisions regarding the degree of commonality are implemented by optionally fixing the design of a shared component when sizing an aircraft

Environmental & flight control system architecture optimization from a family concept design perspective

One method an Original Equipment Manufacturer (OEM) can apply to reduce development and manufacturing costs is family concept design: each product family member is designed for a different design point, but a significant amount of components is shared among the family members. In this case, a trade-off exists between member performance and commonality. In the design of complex systems, often many different architectures are possible, and the design space is too large to explore exhaustively. In this work, we present an application of a new architecture optimization method to the design of a family of passenger transport jets, with a focus on the sizing of the Environmental Control System (ECS) and Flight Control System (FCS). The architecture design space is modeled using the Architecture Design Space Graph (ADSG), a novel method for constructing model-based system architecture optimization problems. Decisions are extracted and the multi-objective optimization problem is automatically formulated. Objectives used are commonality, representing acquisition costs, and fuel burn, representing a part of operation costs. These metrics are evaluated using a cross-organizational collaborative multidisciplinary analysis toolchain, and the resulting Multidisciplinary Design Optimization (MDO) problem is solved using a multi-objective evolutionary optimization algorithm. The results show that the trade-off between commonality and fuel burn is only present above a certain commonality level

Methodological enhancements in MDO process investigated in the AGILE European project

This paper presents methodological investigations performed in research activities in the field of MDO in overall aircraft design in the ongoing EU funded research project AGILE. AGILE is developing the next generation of aircraft Multidisciplinary Design and Optimization processes, which target significant reductions in aircraft development costs and time to market, leading to cheaper and greener aircraft solutions. The paper introduces the AGILE project structure and describes the achievements of the 1st year (Design Campaign 1) leading to a reference distributed MDO system. A focus is then made on the different novel optimization techniques studied during the 2nd year, all willing to ease the optimization of complex work flows, characterized by high degree of discipline interdependencies, high number of design variables in the context of multi-level and multi-partner collaborative engineering projects. Then the implementation of these methods in the enhanced MDO framework is discussed