Design of an internal wave generator for experimental applications

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2008.Includes bibliographical references (leaf 45).This thesis presents the design of an internal wave generator for experimental applications. It is based on the previous design by Gostiaux, Didelle, Mercier and Dauxois, however it is constructed on a smaller scale to be of use in one of the smaller tanks in the Nonlinear Dynamics Lab at MIT. The generator operates by forming a traveling sinusoidal boundary that results in a single internal wave beam propagating through the fluid medium. The boundary is created by stacking 12 plates on top of each other, and using a rotating camshaft to drive them in a sinusoidal fashion. Measurements of the oscillation of each plate shows that the motion induced in each plates by the camshaft is very close to sinusoidal, and that the generator can successfully produce oscillations of amplitudes as low as 3 or 4mm. Schlieren images show that the generator is capable of producing a single wave beam, with minimal disturbances in other directions. In addition, the direction of the wave beam can be controlled by the speed of rotation of the camshaft, and wave beams of different widths can be produced by altering the camshaft design.by Christopher Dimitriou.S.B

A comprehensive constitutive law for waxy crude oil: a thixotropic yield stress fluid

Guided by a series of discriminating rheometric tests, we develop a new constitutive model that can quantitatively predict the key rheological features of waxy crude oils. We first develop a series of model crude oils, which are characterized by a complex thixotropic and yielding behavior that strongly depends on the shear history of the sample. We then outline the development of an appropriate preparation protocol for carrying out rheological measurements, to ensure consistent and reproducible initial conditions. We use RheoPIV measurements of the local kinematics within the fluid under imposed deformations in order to validate the selection of a particular protocol. Velocimetric measurements are also used to document the presence of material instabilities within the model crude oil under conditions of imposed steady shearing. These instabilities are a result of the underlying non-monotonic steady flow curve of the material. Three distinct deformation histories are then used to probe the material's constitutive response. These deformations are steady shear, transient response to startup of steady shear with different aging times, and large amplitude oscillatory shear (LAOS). The material response to these three different flows is used to motivate the development of an appropriate constitutive model. This model (termed the IKH model) is based on a framework adopted from plasticity theory and implements an additive strain decomposition into characteristic reversible (elastic) and irreversible (plastic) contributions, coupled with the physical processes of isotropic and kinematic hardening. Comparisons of experimental to simulated response for all three flows show good quantitative agreement, validating the chosen approach for developing constitutive models for this class of materials.Chevron Corporatio

The rheological complexity of waxy crude oils : yielding, thixotropy and shear heterogeneities

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2013.Cataloged from PDF version of thesis.Includes bibliographical references (p. 305-320).Precipitate-containing crude oils are of increasing economic importance, due to diminishing oil reserves and the increased need to extract hydrate and wax-containing crude oil from ultra deep-water resources. Despite this need, the rheological behavior of these types of crude oil is often poorly understood. In this thesis, we investigate some of the underlying complexities associated with the rheology of waxy crude oils. These complex phenomena are often difficult to both quantify experimentally and capture with existing constitutive models. The contribution of this thesis is therefore to develop a detailed understanding of three of these particular phenomena, through the development and use of several new experimental and theoretical tools. A better understanding of waxy crude oil rheology is critical for developing flow assurance strategies, which can in turn ensure continuous production of precipitate-containing crude oils under adverse conditions. The three phenomena studied are, first: shear heterogeneities, i.e. the manifestation of wall slip, shear banding or other shear-localization events under imposed deformations that are assumed to be homogenous. For these purposes, flow visualization techniques capable of "Rheo-PIV" measurements are developed to detect these heterogeneities. Second: elasto-viscoplasticity, or the presence of an elastic response and a yield-like behavior in a non-Newtonian fluid. Constitutive modeling of this type of behavior is difficult to achieve using standard linear viscoelastic techniques, where the viscoelastic response is decomposed into a finite number of linear elements with a spectrum of relaxation times. For these reasons, additional concepts are adopted from plasticity models in order to describe this behavior. Finally: thixotropy, which refers to the ability of a fluid to continuously evolve, or age at rest and shear rejuvenate under a constant applied shear rate. A rigorous set of experimental tests is constructed which allow for the appropriate constitutive model parameters to be determined for a thixotropic fluid. Through quantitative study of these phenomena, we reach several conclusions about how to characterize and model the rheology of a precipitate-containing crude oil. First, measurements of shear heterogeneities are important in these fluids, so that rheological characterization may proceed with a knowledge of when these may arise and introduce artifacts into data. Second, new nonlinear rheometric techniques are necessary to develop quantitative data sets that describe the inherently nonlinear rheology of these fluids. The specific technique developed in this work is termed stress-controlled large amplitude oscillatory shear, or LAOStress. Finally, we show that the constitutive behavior of these materials is best prescribed using a framework which utilizes yielding and hardening mechanisms from plasticity theory. The resulting constitutive model for this nonlinear elasto-viscoplastic and thixotropic class of materials is expressed in a closed form that can be used in existing flow assurance simulation tools. The most relevant applications for this work are in the flow assurance challenges associated with crude oil production. Consequently, a large portion of the experimental work is carried out on a model waxy crude oil, containing a total wax content ranging from 5 to 10% by weight. However the phenomena studied here occur ubiquitously in a number of complex fluids. For this reason, the same rheological complexities are studied in the context of several other fluids, including a swollen microgel paste (Carbopol) and a shear-banding wormlike micellar solution.by Christopher J. Dimitriou.Ph.D

Spatiotemporal dynamics of multiple shear-banding events for viscoelastic micellar fluids in cone-plate shearing flows

We characterize the transient response of semi-dilute wormlike micellar solutions under an imposed steady shear flow in a cone-plate geometry. By combining conventional rheometry with 2-D Particle Image Velocimetry (PIV), we can simultaneously correlate the temporal stress response with time-resolved velocimetric measurements. By imposing a well defined shear history protocol, consisting of a stepped shear flow sweep, we explore both the linear and nonlinear responses of two surfactant solutions: cetylpiridinium chloride (CPyCl) and sodium salicylate (NaSal) mixtures at concentrations of [66:40] mM and [100:60] mM, respectively. The transient stress signal of the more dilute solution relaxes to its equilibrium value very fast and the corresponding velocity profiles remain linear, even in the strongly shear-thinning regime. The more concentrated solution also exhibits linear velocity profiles at small shear rates. At large enough shear rates, typically larger than the inverse of the relaxation time of the fluid, the flow field reorganizes giving rise to strongly shear-banded velocity profiles. These are composed of an odd number of shear bands with low-shear-rate bands adjacent to both gap boundaries. In the non-linear regime long transients (much longer than the relaxation time of the fluid) are observed in the transient stress response before the fluid reaches a final, fully-developed state. The temporal evolution in the shear stress can be correlated with the spatiotemporal dynamics of the multiple shear-banded structure measured using RheoPIV. In particular our experiments show the onset of elastic instabilities in the flow which are characterized by the presence of multiple shear bands that evolve and rearrange in time resulting in a slow increase in the average torque acting on the rotating fixture

Flow field visualization of entangled polybutadiene solutions under nonlinear viscoelastic flow conditions

Using self-designed particle visualization instrumentation, startup shear and step-strain tests were conducted under a series of systematically varied rheological and geometrical conditions, and the velocity profiles in three different well-entangled polybutadiene/oligomer solutions were obtained. For startup shear tests, in the regime of entanglement densities up to 89 and nominal reptation Weissenberg numbers up to 18.6, we generally observe either wall slip and a linear velocity/strain profile or simply the linear profile with no wall slip unless a massive edge fracture or instability has occurred in the sample. Meanwhile, step-strain tests conducted at similar and higher step Weissenberg numbers revealed little particle motion upon cessation. These results lead us to a conclusion that there is no compelling evidence of shear banding or nonquiescent relaxation in the range of entanglement density and Wi investigated; we interpret the results to imply that any observed banding probably correlates with edge effects.National Science Foundation (U.S.) (Grant DMR-0934305

Describing and prescribing the constitutive response of yield stress fluids using large amplitude oscillatory shear stress (LAOStress)

Large amplitude oscillatory shear (LAOS) is used as a tool to probe the nonlinear rheological response of a model elasto-viscoplastic material (a Carbopol microgel). In contrast to most recent studies, these large amplitude measurements are carried out in a stress-controlled manner. We outline a descriptive framework of characterization measures for nonlinear rheology under stress-controlled LAOS, and this is contrasted experimentally to the strain-controlled framework that is more commonly used. We show that this stress-controlled methodology allows for a physically intuitive interpretation of the yielding behavior of elasto-viscoplastic materials. The insight gained into the material behavior through these nonlinear measures is then used to develop two constitutive models that prescribe the rheological response of the Carbopol microgel. We show that these two successively more sophisticated constitutive models, which are based on the idea of strain decomposition, capture in a compact manner the important features of the nonlinear rheology of the microgel. The second constitutive model, which incorporates the concept of kinematic hardening, embodies all of the essential behaviors exhibited by Carbopol. These include elasto-viscoplastic creep and time-dependent viscosity plateaus below a critical stress, a viscosity bifurcation at the critical stress, and Herschel–Bulkley flow behavior at large stresses

Techno-economic feasibility of selective CO2 capture processes from biogas streams using ionic liquids as physical absorbents

Biogas from anaerobic digestion of sewage sludge is a renewable resource with high energy content, which is composed mainly of CH4 (40-75 vol %) and CO2 (15-60 vol %). Other components, such as water (H2O, 5-10 vol %) and trace amounts of hydrogen sulfide and siloxanes, can also be present. A CH4-rich stream can be produced by removing the CO2 and other impurities so that the upgraded biomethane can be injected into the natural gas grid or used as a vehicle fuel. The main objective of this paper is to assess the technical and economic performance of biogas upgrading processes using ionic liquids that physically absorb CO2. The simulation methodology is based on the COSMO-SAC model as implemented in Aspen Plus. Three different ionic liquids, namely, 1-ethyl-3-methylimidazolium bis(trifluoromethyl)sulfonylimide, 1-hexyl-3-methylimidazoliumbis(trifluoromethyl)sulfonylimide, and trihexyl(tetradecyl)phosphonium bis(trifluoromethyl)sulfonylimide, are considered for CO2 capture in a pressure-swing regenerative absorption process. The simulation software Aspen Plus and Aspen Process Economic Analyzer is used to account for mass and energy balances as well as equipment cost. In all cases, the biogas upgrading plant consists of a multistage compressor for biogas compression, a packed absorption column for CO2 absorption, a flash evaporator for solvent regeneration, a centrifugal pump for solvent recirculation, a preabsorber solvent cooler, and a gas turbine for electricity recovery. The evaluated processes are compared in terms of energy efficiency, capital investment, and biomethane production costs. The overall plant efficiency ranges from 71 to 86%, and the biomethane production cost ranges from 9.18-11.32 per GJ (LHV). A sensitivity analysis is also performed to determine how several technical and economic parameters affect the biomethane production costs. The results of this study show that the simulation methodology developed can predict plant efficiencies and production costs of large scale CO2 capture processes using ionic liquids without having to rely on gas solubility experimental data

Identifying therapeutic targets for cancer among 2074 circulating proteins and risk of nine cancers

Circulating proteins can reveal key pathways to cancer and identify therapeutic targets for cancer prevention. We investigate 2,074 circulating proteins and risk of nine common cancers (bladder, breast, endometrium, head and neck, lung, ovary, pancreas, kidney, and malignant non-melanoma) using cis protein Mendelian randomisation and colocalization. We conduct additional analyses to identify adverse side-effects of altering risk proteins and map cancer risk proteins to drug targets. Here we find 40 proteins associated with common cancers, such as PLAUR and risk of breast cancer [odds ratio per standard deviation increment: 2.27, 1.88-2.74], and with high-mortality cancers, such as CTRB1 and pancreatic cancer [0.79, 0.73-0.85]. We also identify potential adverse effects of protein-altering interventions to reduce cancer risk, such as hypertension. Additionally, we report 18 proteins associated with cancer risk that map to existing drugs and 15 that are not currently under clinical investigation. In sum, we identify protein-cancer links that improve our understanding of cancer aetiology. We also demonstrate that the wider consequence of any protein-altering intervention on well-being and morbidity is required to interpret any utility of proteins as potential future targets for therapeutic prevention.</p

Rheo-PIV of a shear-banding wormlike micellar solution under large amplitude oscillatory shear

We explore the behavior of a wormlike micellar solution under both steady and large amplitude oscillatory shear (LAOS) in a cone–plate geometry through simultaneous bulk rheometry and localized velocimetric measurements. First, particle image velocimetry is used to show that the shear-banded profiles observed in steady shear are in qualitative agreement with previous results for flow in the cone–plate geometry. Then under LAOS, we observe the onset of shear-banded flow in the fluid as it is progressively deformed into the non-linear regime—this onset closely coincides with the appearance of higher harmonics in the periodic stress signal measured by the rheometer. These harmonics are quantified using the higher-order elastic and viscous Chebyshev coefficients e [subscript n] and v [subscript n] , which are shown to grow as the banding behavior becomes more pronounced. The high resolution of the velocimetric imaging system enables spatiotemporal variations in the structure of the banded flow to be observed in great detail. Specifically, we observe that at large strain amplitudes (γ [subscript 0] ≥ 1), the fluid exhibits a three-banded velocity profile with a high shear rate band located in-between two lower shear rate bands adjacent to each wall. This band persists over the full cycle of the oscillation, resulting in no phase lag being observed between the appearance of the band and the driving strain amplitude. In addition to the kinematic measurements of shear banding, the methods used to prevent wall slip and edge irregularities are discussed in detail, and these methods are shown to have a measurable effect on the stability boundaries of the shear-banded flow.Spain. Ministerio de Educación y Ciencia (MEC) (Project FIS2010-21924-C02-02