1,614 research outputs found

    Regulation of NGN: Structural Separation, Access Regulation, or No Regulation at All?

    Get PDF
    Since the introduction of Next Generation Networks (NGNs) by telecommunication network operators, national regulators have begun to adapt their access regulation regimes to the new technological conditions. The regulatory reactions gravitate towards three distinct regulatory trajectories: unregulated competition, access regulation, and structural separation. We first analyze the extent of market power in access Networks in NGNs from a technological perspective. Second, we use case studies to identify patterns between technological and market conditions and regulators' reactions in selected countries. We find that market power in the access network is likely to prevail. Regulatory reactions differ with the extent of infrastructure competition and the regulators position in the trade-off between promoting investment and protecting competition.Next Generation Network, deregulation, access regulation, structural separation

    Regulation of NGN: Structural Separation, Access Regulation, or No Regulation at All?

    Get PDF
    Since the introduction of Next Generation Networks (NGNs) by telecommunication network operators, national regulators have begun to adapt their access regulation regimes to the new technological conditions. The regulatory reactions gravitate towards three distinct regulatory trajectories: unregulated competition, access regulation, and structural separation. We first analyze the extent of market power in access Networks in NGNs from a technological perspective. Second, we use case studies to identify patterns between technological and market conditions and regulators' reactions in selected countries. We find that market power in the access network is likely to prevail. Regulatory reactions differ with the extent of infrastructure competition and the regulators position in the trade-off between promoting investment and protecting competitionNext Generation Network, deregulation, access regulation, structural separation.

    Entwicklung, Herstellung und Charakterisierung eines bistabilen mikromechanischen Schaltaktors in Siliziumtechnik

    Get PDF
    Diese Arbeit beschäftigt sich mit der Entwicklung, Fertigung und der Charakterisierung eines mikromechanischen Schaltaktors in Siliziumtechnik, der aufgrund seiner bistabilen Eigenschaft zwei unterschiedliche Ruhepositionen besitzt. Durch Energiezufuhr über eine integrierte Heizerstruktur kann dabei zwischen den beiden Ruhelagen umgeschaltet werden. Hauptaugenmerk wurde dabei auf die Anwendung etablierter mikrosystemtechnischer Herstellungsverfahren gelegt, um die Batchprozessierbarkeit und damit eine kostengünstige Herstellung zu ermöglichen. Der Schaltaktor besteht aus einer aus dem Bulk-Material herausgeätzen Siliziummembran, die durch eine unter speziellen Bedingungen abgeschiedene Wolframschicht unter Druckspannung versetzt wird. Dabei bildet sich aufgrund des Bucklingeffektes eine von der Höhe der Druckspannung abhängige Verwölbung mit zwei stabilen Zuständen (vgl. Knackfrosch), die durch thermopneumatische Aktivierung ineinander überführt werden können. Darauf basierend wird ein elektrischer Schalter hergestellt, mit Hilfe dessen die Praxistauglichkeit des Funktionsprinzips bewiesen und getestet wird. Daraus gewonnene Erkenntnisse führen zu einer verbesserten Variante des Schaltaktors, der ebenfalls gefertigt und charakterisiert wird. Neben den Funktionsprinzipien beschreibt diese Arbeit die genauen Herstellungsprozesse, die verwendeten Charakterisierungsmethoden sowie die Herleitung eines mathematischen Modells zur Verifikation und Optimierung des Schaltelements.This work reports on a bistable micro actuator which is fully compatible with MEMS processing methods and can be batch fabricated in a cost effective way. By supplying energy through an integrated heater structure a membrane can be switched between its two stable positions. The device setup includes a wet etched silicon membrane covered with a special sputter-deposited tungsten thin film layer, inducing a very high amount of compressive stress. This results in a deflection of the membrane and leads to a buckling behaviour with two stable positions, which can be transferred into each other by a thermopneumatic actuation principle. Based on this concept an electrical switch is designed and fabricated to prove and verify its practical suitability. Experiences gained from this prototype lead to an improved redesign which is also fabricated and characterized. The results are compared to an especially developed mathematical model together with FEM-simulations, yielding reliable predictions about the behaviour of the device depending on design parameters. All necessary fabrication and testing procedures are described in detail

    Entwicklung, Herstellung und Charakterisierung eines bistabilen mikromechanischen Schaltaktors in Siliziumtechnik

    Get PDF
    Diese Arbeit beschäftigt sich mit der Entwicklung, Fertigung und der Charakterisierung eines mikromechanischen Schaltaktors in Siliziumtechnik, der aufgrund seiner bistabilen Eigenschaft zwei unterschiedliche Ruhepositionen besitzt. Durch Energiezufuhr über eine integrierte Heizerstruktur kann dabei zwischen den beiden Ruhelagen umgeschaltet werden. Hauptaugenmerk wurde dabei auf die Anwendung etablierter mikrosystemtechnischer Herstellungsverfahren gelegt, um die Batchprozessierbarkeit und damit eine kostengünstige Herstellung zu ermöglichen. Der Schaltaktor besteht aus einer aus dem Bulk-Material herausgeätzen Siliziummembran, die durch eine unter speziellen Bedingungen abgeschiedene Wolframschicht unter Druckspannung versetzt wird. Dabei bildet sich aufgrund des Bucklingeffektes eine von der Höhe der Druckspannung abhängige Verwölbung mit zwei stabilen Zuständen (vgl. Knackfrosch), die durch thermopneumatische Aktivierung ineinander überführt werden können. Darauf basierend wird ein elektrischer Schalter hergestellt, mit Hilfe dessen die Praxistauglichkeit des Funktionsprinzips bewiesen und getestet wird. Daraus gewonnene Erkenntnisse führen zu einer verbesserten Variante des Schaltaktors, der ebenfalls gefertigt und charakterisiert wird. Neben den Funktionsprinzipien beschreibt diese Arbeit die genauen Herstellungsprozesse, die verwendeten Charakterisierungsmethoden sowie die Herleitung eines mathematischen Modells zur Verifikation und Optimierung des Schaltelements.This work reports on a bistable micro actuator which is fully compatible with MEMS processing methods and can be batch fabricated in a cost effective way. By supplying energy through an integrated heater structure a membrane can be switched between its two stable positions. The device setup includes a wet etched silicon membrane covered with a special sputter-deposited tungsten thin film layer, inducing a very high amount of compressive stress. This results in a deflection of the membrane and leads to a buckling behaviour with two stable positions, which can be transferred into each other by a thermopneumatic actuation principle. Based on this concept an electrical switch is designed and fabricated to prove and verify its practical suitability. Experiences gained from this prototype lead to an improved redesign which is also fabricated and characterized. The results are compared to an especially developed mathematical model together with FEM-simulations, yielding reliable predictions about the behaviour of the device depending on design parameters. All necessary fabrication and testing procedures are described in detail

    Towards Zwitterionic Oligonucleotides with Improved Properties: the NAA/LNA-Gapmer Approach

    Get PDF
    Oligonucleotides (ON) are promising therapeutic candidates, for instance by blocking endogenous mRNA (antisense mechanism). However, ON usually require structural modifications of the native nucleic acid backbone to ensure satisfying pharmacokinetic properties. One such strategy to design novel antisense oligonucleotides is to replace native phosphate diester units by positively charged artificial linkages, thus leading to (partially) zwitterionic backbone structures. Herein, we report a “gapmer” architecture comprised of one zwitterionic central segment (“gap”) containing nucleosyl amino acid (NAA) modifications and two outer segments of locked nucleic acid (LNA). This NAA/LNA‐gapmer approach furnished a partially zwitterionic ON with optimised properties: i) the formation of stable ON‐RNA duplexes with base‐pairing fidelity and superior target selectivity at 37 °C; and ii) excellent stability in complex biological media. Overall, the NAA/LNA‐gapmer approach is thus established as a strategy to design partially zwitterionic ON for the future development of novel antisense agents

    S-Ketamin zur Supplementierung der Anästhesie bei ambulanten arthroskopischen Schulteroperationen: Auswirkungen auf postoperative Schmerzen, hämodynamische Stabilität, perioperative Medikation, Prozesszeiten, Anästhesie-induzierte Nebenwirkungen und Patientenzufriedenheit

    Get PDF
    Die Zielsetzung dieser Studie war, zu untersuchen, ob im Rahmen einer Allgemeinanästhesie für ambulante, arthroskopische Schulteroperationen präoperativ intravenös verabreichtes S-Ketamin einen Vorteil in Bezug auf postoperative Schmerzintensität, intraoperative Hämodynamik, perioperative Medikation, Prozesszeiten, Anästhesie-induzierte Nebenwirkungen und Patientenzufriedenheit erbringt. Die vorliegenden Daten zeigen, dass zusätzlich verabreichtes S-Ketamin die Schmerzintensität bei diesen Operationen nicht reduziert. Eine Reduktion des Bedarfs postoperativer Analgetika konnte ebenfalls nicht nachgewiesen werden. Intraoperativ wurden Anästhetika in der S-Ketamin-Gruppe höher dosiert als in der Kontroll-Gruppe, ohne dabei klinisch relevante und signifikante Veränderungen der hämodynamischen Parameter (Herzfrequenz und Blutdruck) zu verursachen. Darüber hinaus waren die aufgezeichneten Prozesszeiten, z.B. die Ausleitungszeit und die Aufwachraumzeit in der S-Ketamin-Gruppe signifikant schlechter als in der Kontroll-Gruppe. Im Hinblick auf perioperative Begleitsymptome litten Patienten in der S-Ketamin-Gruppe häufiger an postoperativem Erbrechen als Patienten in der Kontroll-Gruppe. Bezüglich der Patientenzufriedenheit gab es keinen signifikanten Unterschied zwischen den beiden Patientengruppen. In Anbetracht dieser Ergebnisse ist festzustellen, dass zusätzlich verabreichtes S-Ketamin bei ambulanten, arthroskopischen Schulteroperationen keinen klinisch relevanten Vorteil, sondern im Gegenteil verschiedene Nachteile bewirkt. Daher ist vom Einsatz niedrig dosierten intravenösen S-Ketamins bei ambulanten arthroskopischen Schulteroperationen unter den Bedingungen der Studie abzuraten

    Electron localization by self-assembled GaSb/GaAs quantum dots.

    Get PDF
    We have studied the photoluminescence from type-II GaSb/GaAs self-assembled quantum dots in magnetic fields up to 50 T. Our results show that at low laser power, electrons are more weakly bound to the dots than to the wetting layer, but that at high laser power, the situation is reversed. We attribute this effect to an enhanced Coulomb interaction between a single electron and dots that are multiply charged with holes

    Regulation of NGN: Structural Separation, Access Regulation, or No Regulation at All?

    Get PDF
    Since the introduction of Next Generation Networks (NGNs) by telecommunication network operators, national regulators have begun to adapt their access regulation regimes to the new technological conditions. The regulatory reactions gravitate towards three distinct regulatory trajectories: unregulated competition, access regulation, and structural separation. We first analyze the extent of market power in access Networks in NGNs from a technological perspective. Second, we use case studies to identify patterns between technological and market conditions and regulators' reactions in selected countries. We find that market power in the access network is likely to prevail. Regulatory reactions differ with the extent of infrastructure competition and the regulators position in the trade-off between promoting investment and protecting competition

    Regulation of NGN: Structural Separation, Access Regulation, or No Regulation at All?

    Get PDF
    Since the introduction of Next Generation Networks (NGNs) by telecommunication network operators, national regulators have begun to adapt their access regulation regimes to the new technological conditions. The regulatory reactions gravitate towards three distinct regulatory trajectories: unregulated competition, access regulation, and structural separation. We first analyze the extent of market power in access Networks in NGNs from a technological perspective. Second, we use case studies to identify patterns between technological and market conditions and regulators' reactions in selected countries. We find that market power in the access network is likely to prevail. Regulatory reactions differ with the extent of infrastructure competition and the regulators position in the trade-off between promoting investment and protecting competition
    corecore