Which policy for biochar deployment in Southern EU? An integrated approach is possible

The scope of the present paper is to address possible policy schemes that could potentially enable widespread diffusion of biochar in the EU Mediterranean area. In fact, despite the rapid development of biochar technologies and processes, the actual exploitation is mostly dependent on the actual support scheme that is in place. However, one single support instrument will unlikely be sufficient to cover the costs connected to biochar production and use: moreover, developing totally new policy instruments is a very long and time consuming process. The approach of the present work is to investigate the possibility of combining different EU policies that are already in place (with only minor adaptations), and analyze if a combined action would allow for achieving economic sustainability and thus commercial deployment of biochar in agriculture, favouring decentralized production of biochar. Please click on the file below for full content of the abstract

Sustainable Aviation Fuels: the challenge of decarbonization

Abstract Aviation is steadily growing worldwide as well as in the European Union (EU). Overall, EU transports increased their GreenHouse Gas (GHG) Emissions since 1990, while the other energy sectors succeeded in achieving a constant reduction over the same period. In this context, air transport is the most critical area to decarbonize, given the limited number of options that can be implemented, such as optimization of flight routes, increase of jet engine energy efficiency, and few others. Switching to renewable or low carbon fuels is thus the main opportunity for aviation. Large scale deployment of Sustainable Aviation Fuels (SAF) is however a real challenge, as it requires large investments in new production facilities, strong reduction in production costs (over the entire value chain, i.e. including feedstock production, collection and delivery), and considerable investments in ASTM certification. The present work shortly reviews the perspectives of aviation fuel in terms of demand and GHG emission trends, possible routes to jet fuel production, and the status of ASTM certified routes to jet fuel as of today

Status of Biochar and Carbon sequestration policy: how can market development be driven?

Please click Additional Files below to see the full abstract

Strategies toward experimental assessments of new aviation renewable fuels and blends: The BIOREFLY Project

The reduction of greenhouse gases emissions from the aviation sector is focused on better engine efficiency or optimized flight pathways. However, the most relevant is probably the use of sustainable biofuels. In order to meet the strict jet fuelspecifications for commercial flights, these biofuels(drop-in fuels) must contain only paraffinic hydrocarbons, without heteroatoms. Several renewable aviation fuels have already been certified by ASTM, others are under examination. Anew promising route consists in the thermochemical conversion of lignin, the main co-product from 2nd generation ethanol. The EU FP7 BIOREFLY project will develop a first industrial pre-commercial lignin-to-jet fuel 2000 ty-1demonstration plant. The present work describes strategies, equipment and R&D lines of BIOREFLY, which aims at evaluating the properties of this bio-jet fuel and its blends in view of future ASTM certification. Injection features and the combustion properties of aviation engines will be investigated in an optical combustor rig. Combustion parameters, emissions and chemiluminescence provide fundamental data to understand the combustion behavior for different hydrocarbons species. Tests in micro-gas-turbines (i.e. power generation and APU-derivative units) will assess the effect of fuels in terms of emissions and evaluating their performances

Review of US and EU initiatives toward development, demonstration, and commercialization of lignocellulosic biofuels

Advanced biofuels produced from lignocellulosic biomass offer an exciting opportunity to produce renewable liquid transportation fuels, biochemicals, and electricity from locally available agriculture and forest residues. The growing interest in biofuels from lignocellulosic feedstock in the United States (US) and the European Union (EU) can provide a path forward toward replacing petroleum-based fuels with sustainable biofuels which have the potential to lower greenhouse gas (GHG) emissions. The selection of biomass conversion technologies along with feedstock development plays a crucial role in the commercialization of next-generation biofuels. There has been synergy and, even with similar basic process routes, diversity in the conversion technologies chosen for commercialization in the EU and the US. The conversion technologies for lignocellulosic biomass to advanced biofuels can be broadly classified in three major categories: biochemical, thermochemical, and hybrid conversions. The objective of this review is to discuss the US and EU biofuel initiatives, feedstock availability, and the state-of-art conversion technologies that are potentially ready or are already being deployed for large-scale applications. The review covers and compares the developments in these areas in the EU and the USA and provides a comprehensive list of the most relevant ongoing development, demonstration, and commercialization activities in various companies, along with the different processing strategies adopted by these projects

Autothermal slow pyrolysis of poplar wood chips in an auger reactor

Please click Additional Files below to see the full abstrac

Challenges and opportunities of process modelling renewable advanced fuels

The Paris COP21 held on December 2015 represented a step forward global GHG emission reduction: this led to intensify research efforts in renewables, including biofuels and bioliquids. However, addressing sustainable biofuels and bioliquid routes and value chains which can limit or reverse the ILUC (indirect land-use change effect) is of paramount importance. Given this background condition, the present study targets the analysis and modelling a new integrated biomass conversion pathway to produce renewable advanced fuels, enabling the issue of indirect land-use change (ILUC) of biofuels to be tackled. The bioenergy chain under investigation integrates the decentralized production of biogas through anaerobic digestion and its upgrading to biomethane, followed by a centralized conversion to liquid transport fuels, involving methane reforming into syngas, Fischer–Tropsch (FT) synthesis, and methanol synthesis. The methodology adopted in this work stem from extensive literature review of suitable bio/thermo-chemical conversion technologies and their process modelling using a commercial flow-diagram simulation software is carried out. The major significance of the study is to understand the different modelling approaches, to allow the estimation of process yields and mass/energy balances: in such a way, this work aims at providing guidance to process modellers targeting qualitative and quantitative assessments of biomass to biofuels process routes. Beyond FT products, additional process pathways have been also explored, such as MeOH synthesis from captured CO2 and direct methane to methanol synthesis (DMTM). The analysis demonstrated that it is possible to model such innovative integrated processes through the selected simulation tool. However, research is still needed as regards the DMTM process, where studies about modelling this route through the same tool have not been yet identified in the literature

Comparing e-Fuels and Electrification for Decarbonization of Heavy-Duty Transports

The freight sector is expected to keep, or even increase, its fundamental role for the major modern economies, and therefore actions to limit the growing pressure on the environment are urgent. The use of electricity is a major option for the decarbonization of transports; in the heavy-duty segment, it can be implemented in different ways: besides full electric-battery powertrains, electricity can be used to supply catenary roads, or can be chemically stored in liquid or gaseous fuels (e-fuels). While the current EU legislation adopts a tailpipe Tank-To-Wheels approach, which results in zero emissions for all direct uses of electricity, a Well-To-Wheels (WTW) method would allow accounting for the potential benefits of using sustainable fuels such as e-fuels. In this article, we have performed a WTW-based comparison and modelling of the options for using electricity to supply heavy-duty vehicles: e-fuels, eLNG, eDiesel, and liquid Hydrogen. Results showed that the direct use of electricity can provide high Greenhouse Gas (GHG) savings, and also in the case of the e-fuels when low-carbonintensity electricity is used for their production. While most studies exclusively focus on absolute GHG savings potential, considerations of the need for new infrastructures, and the technological maturity of some options, are fundamental to compare the different technologies. In this paper, an assessment of such technological and non-technological barriers has been conducted, in order to compare alternative pathways for the heavy-duty sector. Among the available options, the flexibility of using drop-in, energy-dense liquid fuels represents a clear and substantial immediate advantage for decarbonization. Additionally, the novel approach adopted in this paper allows us to quantify the potential benefits of using e-fuels as chemical storage able to accumulate electricity from the production peaks of variable renewable energies, which would otherwise be wasted due to grid limitations

Thermochemical Conversion of Microalgae: Challenges and Opportunities

Abstract Research in Advanced Biofuels steadily developed during recent years. A number of highly innovative technologies have been explored at various scale: among these, lignocellulosic ethanol and CTO (Crude Tall Oil)-biofuel technologies already achieved the early-commercial status, while hydrotreating of vegetable oils (HVO, or HEFA) can be considered today fully commercial. However, despite the level of innovation in each specific technological process under consideration, the feedstock maintains a central role in making a biofuel chain really sustainable. In this context, microalgae grown in salt-water and arid areas offers a considerable opportunity for advanced biofuel production: at the same time, however, they also represent a considerable challenge. Processing microalgae in an economic way into a viable and sustainable liquid biofuel (a low-cost mass-produced product) is not trivial. So far, the main attention has been given to cultivating the microorganism, accumulating lipids, extracting the oil, valorising co-products, and treating the algae oil into biodiesel (through esterification) or HEFA (Hydrotreated Esthers and Fatty Acids), this second one representing a very high quality biofuels, almost a drop-in fuel (suitable either for road transport or for aviation), which production exceed 2 Mt y-1 today. However, extracting the algae oil at low cost and at industrial scale is not yet a full industrial mature process, and the still limited market size of algae-to-biofuels makes difficult the development of industrial-scale systems. Nevertheless, another option can be considered, i.e. processing the whole algae into dedicated thermochemical reactors, thus approaching the downstream processing of algae in a completely different way from separation. The present work examines the possible routes for thermochemical conversion of microalgae, distinguishing between dry-processes (namely pyrolysis and gasification) and wet-processes (near critical water hydrothermal liquefaction and hydrothermal gasification). Typical expected elementary composition of major products is given. Main peculiarities of batch versus continuous processing are also discussed from an engineering point of view. Major engineering advantages and challenges in thermochemically conversion of algae are identified and discussed, in view of the production of a transport biofuel. Finally, future perspectives for each route are given in terms of current and expected technological readiness level