93 research outputs found
Recommended from our members
The role of dynamic experimentation for computation analysis
In this paper a brief description of dynamic techniques commonly available for determining material property studies is presented. For many impact applications, the material generally experiences a complex loading path. In most cases, the initial loading conditions can be represented by the shock commonly referred to as the Hugoniot state. Subsequent loading or release structure, i.e., off-Hugoniot states would however be dependent on the physical processes dominating the material behavior. The credibility of the material model is tested by the accuracy of predictions of off-Hugoniot states. Experimental techniques commonly used to determine off-Hugoniot states are discussed in this survey
Recommended from our members
Shock-wave properties of soda-lime glass
Planar impact experiments and wave profile measurements provided single and double shock equation of state data to 30 GPa. Both compression wave wave profile structure and release wave data were used to infer time-dependent strength and equation of state properties for soda-lime glass
Recommended from our members
Shock response of dry sand.
The dynamic compaction of sand was investigated experimentally and computationally to stresses of 1.8 GPa. Experiments have been performed in the powder's partial compaction regime at impact velocities of approximately 0.25, 0.5, and 0.75 km/s. The experiments utilized multiple velocity interferometry probes on the rear surface of a stepped target for an accurate measurement of shock velocity, and an impedance matching technique was used to deduce the shock Hugoniot state. Wave profiles were further examined for estimates of reshock states. Experimental results were used to fit parameters to the P-Lambda model for porous materials. For simple 1-D simulations, the P-Lambda model seems to capture some of the physics behind the compaction process very well, typically predicting the Hugoniot state to within 3%
Recommended from our members
ALEGRA -- code validation: Experiments and simulations
In this study, the authors are providing an experimental test bed for validating features of the ALEGRA code over a broad range of strain rates with overlapping diagnostics that encompass the multiple responses. A unique feature of the Arbitrary Lagrangian Eulerian Grid for Research Applications (ALEGRA) code is that it allows simultaneous computational treatment, within one code, of a wide range of strain-rates varying from hydrodynamic to structural conditions. This range encompasses strain rates characteristic of shock-wave propagation (10{sup 7}/s) and those characteristic of structural response (10{sup 2}/s). Most previous code validation experimental studies, however, have been restricted to simulating or investigating a single strain-rate regime. What is new and different in this investigation is that the authors have performed well-instrumented experiments which capture features relevant to both hydrodynamic and structural response in a single experiment. Aluminum was chosen for use in this study because it is a well characterized material--its EOS and constitutive material properties are well defined over a wide range of loading rates. The current experiments span strain rate regimes of over 10{sup 7}/s to less than 10{sup 2}/s in a single experiment. The input conditions are extremely well defined. Velocity interferometers are used to record the high strain-rate response, while low strain rate data were collected using strain gauges
Which executive functioning deficits are associated with AD/HD, ODD/CD and comorbid AD/HD+ODD/CD?
Item does not contain fulltextThis study investigated (1) whether attention deficit/hyperactivity disorder (AD/HD) is associated with executive functioning (EF) deficits while controlling for oppositional defiant disorder/conduct disorder (ODD/CD), (2) whether ODD/CD is associated with EF deficits while controlling for AD/HD, and (3)~whether a combination of AD/HD and ODD/CD is associated with EF deficits (and the possibility that there is no association between EF deficits and AD/HD or ODD/CD in isolation). Subjects were 99~children ages 6–12 years. Three putative domains of EF were investigated using well-validated tests: verbal fluency, working memory, and planning. Independent of ODD/CD, AD/HD was associated with deficits in planning and working memory, but not in verbal fluency. Only teacher rated AD/HD, but not parent rated AD/HD, significantly contributed to the prediction of EF task performance. No EF deficits were associated with ODD/CD. The presence of comorbid AD/HD accounts for the EF deficits in children with comorbid AD/HD+ODD/CD. These results suggest that EF deficits are unique to AD/HD and support the model proposed by R. A. Barkley (1997).17 p
Recommended from our members
Advanced diagnostics for impact-flash spectroscopy on light-gas guns.
This study is best characterized as new technology development for implementing new sensors to investigate the optical characteristics of a rapidly expanding debris cloud resulting from hypervelocity impact regimes of 7 to 11 km/s. Our gas guns constitute a unique test bed that match operational conditions relevant to hypervelocity impact encountered in space engagements. We have demonstrated the use of (1) terahertz sensors, (2) silicon diodes for visible regimes, (3) germanium and InGaAs sensors for the near infrared regimes, and (4) the Sandia lightning detectors which are similar to the silicon diodes described in 2. The combination and complementary use of all these techniques has the strong potential of ''thermally'' characterizing the time dependent behavior of the radiating debris cloud. Complementary spectroscopic measurements provide temperature estimates of the impact generated debris by fitting its spectrum to a blackbody radiation function. This debris is time-dependent as its transport/expansion behavior is changing with time. The rapid expansion behavior of the debris cools the cloud rapidly, changing its thermal/temperature characteristics with time. A variety of sensors that span over a wide spectrum, varying from visible regime to THz frequencies, now gives us the potential to cover the impact over a broader temporal regime starting from high pressures (Mbar) high-temperatures (eV) to low pressures (mbar) low temperatures (less than room temperature) as the debris expands and cools
Serum matrix metalloproteinase-9 levels and severity of symptoms in boys with attention deficit hyperactivity disorder ADHD/hyperkinetic disorder HKD
Recommended from our members
Hypervelocity impact phenomena
There is a need to determine the equations of state of materials in regimes of extreme high pressures, temperatures and strain rates that are not attainable on current two-stage light-gas guns. Understanding high-pressure material behavior is crucial to address the physical processes associated with a variety of hypervelocity impact events related to space sciences-orbital-debris impact, debris-shield designs, high-speed plasma propagation, and impact lethality applications. At very high impact velocities material properties will be dominated by phase-changes, such as melting or vaporization, which cannot be achieved at lower impact velocities. Development of well-controlled and repeatable hypervelocity launch capabilities is the first step necessary to improve our understanding of material behavior at extreme pressures and temperatures not currently available using conventional two-stage light-gas gun techniques. In this paper, techniques that have been used to extend both the launch capabilities of a two-stage light gas gun to 16 km/s, and their use to determine the material properties at pressures and temperature states higher than those ever obtained in the laboratory are summarized. The newly developed hypervelocity launcher (HVL) can launch intact (macroscopic dimensions) plates to 16 km/s. Time-resolved interferometric techniques have been used to determine shock-loading/release characteristics of materials impacted by such fliers as well as shock-induced vaporization phenomena in fully vaporized states. High-speed photography or radiography has been used to evaluate the debris propagation characteristics resulting from disc impact of thin bumper sheets at hypervelocities in excess of 10 km/s using the HVL. Examples of these experiments are provided in this paper
Recommended from our members
Shock characterization of quartz phenolic composite
Goal was to obtain dynamic mechanical property data on a quartz phenolic (abbreviated QP) composite. Shock loading and shock release measurements have been conducted using impact techniques utilizing both a light-gas gun and a powder gun at impact pressures up to 20 GPa. The primary diagnostic tool used was a velocity interferometer. The data analysis includes Hugoniot measurements to give both pressure-particle velocity and shock velocity-particle velocity relationships; spall measurements to determine the fracture stress at which the material spells; and attenuation measurements to determine the shock attenuation with material thickness. The QP Hugoniot relationship was found to be significantly different than that of a phenolic without a filler material indicating that the impedance of the QP used in this investigation was higher. The spall strength was measured to be {approximately}0.075 GPa, similar to nonfilled phenolic, which indicated that the presence of quartz fibers was not contributing to the fracture strength. The material was found to attenuate an imposed shock of approximately 6.3 GPa pressure and 0.18 {mu}s to 50% of the initial impact value after a propagation distance of 7mm
- …