An integrated microring circuit design for optoelectronic transformer applications

The on-chip scale circuit of the optoelectronic transformer is designed and manipulated using the microring resonator system. By using the monochromatic input light source, the electro-optic signals can be generated and functioned as the step up and down conversion by mean of the on-chip optoelectronic transformer. The step up and down of the electro-optic related power conversions can be obtained via the input and drop port connections. The results obtained have shown that the flexible up and down electro-optic conversion ratios of 1: 5 and 10:1 for the step up and down conversions, respectively. The uses light source wavelength source was centered at 800 nm, where the conversion stability of 1600 fs is noted. The linearity trend of the conversion stability is confirmed

Grain zinc and yield responses of two rice varieties to zinc biofortification and water management

Zinc (Zn) biofortification can improve grain yield and nutritional quality in rice, but its effectiveness is subject to agronomic practices and other factors. In a previous study, the application of Zn to soil enhanced grain Zn in lowland rice in well-drained and waterlogged soil, whereas grain Zn in upland rice increased only in well-drained soil. This new study explores the hypothesis that the application of foliar Zn can enhance grain Zn in upland and lowland rice grown under waterlogged and well-drained conditions. Two rice varieties, CNT1 (wetland rice) and KH CMU (upland rice) were grown in containers in waterlogged or well-drained soil with three Zn treatments (no Zn, soil Zn and foliar Zn). For the soil Zn treatment, 50 kg ZnSO4 ha−1 was applied to the soil before transplanting. For the foliar treatment, 0.5% ZnSO4 (equivalent to 900 L ha−1) was applied at booting and repeated at flowering and milky growth stages. Grain yield in CNT1 was 15.9% higher in the waterlogged than in the well-drained plants, but the water regime had no effect on grain yield in KH CMU. Grain Zn concentration in CNT1 increased from 19.5% to 32.6% above the no Zn control when plants were applied with soil or foliar Zn. In KH CMU, there was an interaction between the water regime and Zn treatment. Application of foliar Zn increased grain Zn by 44.6% in well-drained and 14.7% in waterlogged soil. The results indicate strong interaction effects between variety, water regime and Zn fertilizer application on Zn biofortification in rice. Thus, the selection of rice varieties and growing conditions should be considered in order for producers to achieve desirable outcomes from high grain Zn concentrations

On-chip polariton generation using an embedded nanograting microring circuit

We have proposed a model of polariton generation, which is normally generated by the dipole and the strong coupling field interaction. This system consists of a gold grating embedded on the plasmonic island, which is embedded at the center of the nonlinear microring resonator, which is known as a panda-ring resonator. The strong coupling between the plasmonic waves and the grating can be formed by the whispering gallery mode (WGM) of light within a Panda-ring resonator, in which the output is a dipole-like particle known as a polariton and seen at the system output. By varying the energy of high-intensity laser pulse in the system and gold granting a strong field is generated at the output. A dipole is formed by a pair of the grating signals, where one propagates in the opposite direction of the other. By using suitable parameters, dipole-like signals can be generated. Theoretical formulation is performed for a two-level system and polariton oscillation frequency i.e., the Rabi frequency is plotted. The obtained ground and excited state frequencies of this two-level system are 187.86 and 198.20 THz, respectively

Characteristics of an on-chip polariton successively filtered circuit

Polaritonic signal processing model and manipulation using a microring successive filtering circuit are proposed. The polariton signals are generated by the coherent light within the microring embedded a gold nanograting island, from which the successive filtering of the polariton signals within the designed on-chip circuit is manipulated by adjusting the device end reflection coefficients. The almost closed system of the two-level system of polaritons is formed, where there are initially two oscillation frequencies called the Rabi frequencies, the ground an excited state respectively. The required signals of this characteristics study are presented in the domains of wavelength, time and frequency, which can be used to characterise the brain signals in the meditation situation. When the successive polariton switching time (Δt) is approaching zero, from which the stopping polariton state is established, while the polariton frequencies can be tunable. The results obtained have shown that switching time of the 2nd successive round-trip of 25.55 fs is obtained, and in addition, the tunable frequencies of the ground and excited states of the two-level system are achieved

Coherent light squeezing states within a modified microring system

We have proposed the simple method of the squeezed light generation in the modified microring resonator, which is known as the microring conjugate mirror (MCM). When the monochromatic light is input into the MCM, the general form of the squeezed coherent states for a quantum harmonic oscillator can be generated by controlling the additional two side rings, which are the phase modulators. By using the graphical method called the Optiwave program, the coherent squeezed states of coherent light within an MCM can be obtained and interpreted as the amplitude, phase, quadrature and photon number-squeezed states. This method has shown potentials for microring related device design, which can be used before practical applications

Plasmonic Op-Amp Circuit Model using the Inline Successive Microring Pumping Technique

The electro-optic power pumping system model using the inline successive technique within the modified add-drop filter is proposed. A pumping system consists of a closed loop panda ring resonator, from which the optical power is coupled inline into the system. By controlling the two side phase modulators, the whispering gallery mode (WGM) is generated by the amplitude-squeezed light within the modified add-drop filter. By using the proposed circuits, the low current can be applied into the system via a gold layer connection, from which the amplified output current can be obtained at the throughput port, which can be functioned as the electronic operational amplifier (Op-amp). In application, the WGM output is the amplified signal that can be used for the up (down) link in free space communication network called light fidelity (LiFi). The electro-optic signals conversion can be performed by the stacked layers of silicon-graphene-gold materials. The results obtained have shown that large gain is obtained at the WGM output, which is ~5×10-6cm².(V.sW)-1, when the pumping saturation time is ~2 fs. It concludes the suitability of our proposed model for light fidelity, LiFi up-down link conversion

In-situ 3D Micro-sensor Model using Embedded Plasmonic Island for Biosensors

The design of the microsensor system for biosensors using the plasmonic island is proposed. The sensor head is formed by the stacked layers of silicon-graphene-gold materials. The dual-mode operations of the sensor can be performed using the relationship of the changes between the electron mobility and optical phase, where the exciting environment can be light intensity (phase), electrical transient, heat, pressure, flavour and smoke, The change in light phase (intensity) in silicon and conductivity (mobility) in gold layers cause change in the output measurands. The design and simulation interpretation of the sensor is presented. The sensor manipulation using the MCM arrangement is simulated and interpreted for biosensor applications 3D imaging can also be applied to the MCM function, where the 3D in situ sensor function is possible. The sensor sensitivity of 2.0 × 10−21 cm2 V−1 s−1 (mW)−1 via simulation is obtained

SPECIES COMPOSITION OF CARRION BLOW FLIES IN NORTHERN THAILAND: ALTITUDE APPRAISAL

Distribution and occurrence of blow flies of forensic importance was performed during 2007 and 2008 in Chiang Mai and Lampang Provinces, northern Thailand. Surveys were conducted in forested areas for 30 minutes using a sweep net to collected flies attracted to a bait. A total of 2,115 blow flies belonging to six genera and 14 species were collected; Chrysomya megacephala (Fabricius) (44.7%), C. pinguis (Walker) (15.1%), C. chani Kurahashi (9.3%), C. thanomthini Kurahashi & Tumrasvin (0.3%); Achoetandrus rufifacies (Macquart) (10.5%), A. villeneuvi (Patton) (2.2%); Lucilia papuensis Macquart (2.2%), L. porphyrina (Walker) (12.4%), L. sinensis Aubertin (0.7%); Hemipyrellia ligurriens(Wiedemann) (1.3%), H. pulchra(Wiedemann) (0.1%); Hypopygiopsis infumata (Bigot) (0.6%), Hy. tumrasvini Kurahashi (0.2%) and Ceylonomyia nigripes Aubertin (0.4%). Among them, C. megacephala was the predominant species collected, particularly in the summer. The species likely to prevail in highland areas are C. pinguis, C. thanomthini, Hy. tumrasvini, L. papuensis and L. porphyrina

The uses of Chrysomya megacephala (Fabricius, 1794)(Diptera: Calliphoridae) in forensic entomology:

Chrysomya megacephala (Fabricius, 1794) occurs on every continent and is closely associated with carrion and decaying material in human environments. Its abilities to find dead bodies and carry pathogens give it a prominence in human affairs that may involve prosecution or litigation, and therefore forensic entomologists. The identification, geographical distribution and biology of the species are reviewed to provide a background for approaches that four branches of forensic entomology (urban, stored-product, medico-criminal and environmental) might take to investigations involving this fly

Impact of direct substitution of arm span length for current standing height in elderly COPD

Chaicharn Pothirat, Warawut Chaiwong, Nittaya Phetsuk Division of Pulmonary, Critical Care and Allergy, Department of Internal Medicine, Faculty of Medicine, Chiang Mai University, Chiang Mai, Thailand Background: Arm span length is related to standing height and has been studied as a substitute for current standing height for predicting lung function parameters. However, it has never been studied in elderly COPD patients. Purpose: To evaluate the accuracy of substituting arm span length for current standing height in the evaluation of pulmonary function parameters and severity classification in elderly Thai COPD patients. Materials and methods: Current standing height and arm span length were measured in COPD patients aged >60 years. Postbronchodilator spirometric parameters, forced vital capacity (FVC), forced expiratory volume in first second (FEV1), and ratio of FEV1/FVC (FEV1%), were used to classify disease severity according to global initiative for chronic obstructive lung disease criteria. Predicted values for each parameter were also calculated separately utilizing current standing height or arm span length measurements. Student’s t-tests and chi-squared tests were used to compare differences between the groups. Statistical significance was set at P<0.05. Results: A total of 106 COPD patients with a mean age of 72.1±7.8 years, mean body mass index of 20.6±3.8 kg/m2, and mean standing height of 156.4±8.3 cm were enrolled. The mean arm span length exceeded mean standing height by 7.7±4.6 cm (164.0±9.0 vs 156.4±8.3 cm, P<0.001), at a ratio of 1.05±0.03. Percentages of both predicted FVC and FEV1 values based on arm span length were significantly lower than those using current standing height (76.6±25.4 vs 61.6±16.8, P<0.001 and 50.8±25.4 vs 41.1±15.3, P<0.001). Disease severity increased in 39.6% (42/106) of subjects using arm span length over current standing height for predicted lung function. Conclusion: Direct substitution of arm span length for current standing height in elderly Thai COPD patients should not be recommended in cases where arm span length exceeds standing height by more than 4 cm. Keywords: chronic obstructive pulmonary disease, arm span, standing height, spirometry, severity&nbsp