Prediction of the impact sensitivity by neural networks

International audienceThe purpose of this work was the building of an efficient tool for the impact sensitivity prediction in order to minimize the risks during the handling of explosive compound

Polarization-sensitive spectral-domain optical coherence tomography using a single line scan camera

Polarization-sensitive optical coherence tomography can be used to measure the birefringence of biological tissue such as the human retina. Previous measurements with a time-domain polarization-sensitive optical coherence tomography system revealed that the birefringence of the human retinal nerve fiber layer is not constant, but varies as a function of location around the optic nerve head. Here we present a spectral-domain polarization-sensitive optical coherence tomography system that uses a spectrometer configuration with a single line scan camera and a Wollaston prism in the detection arm. Since only one camera has to be synchronized with other components in the system, the design is simplified considerably. This system is 60 times faster than a time-domain polarization-sensitive optical coherence tomography system. Data was acquired using concentric circular scans around the optic nerve head of a young healthy volunteer and the acquisition time for 12 circular scans was reduced from 72 s to 1.2 s. The acquired data sets demonstrate variations in retinal thickness and double pass phase retardation per unit depth that were similar to data from the same volunteer taken with a time-domain polarization-sensitive system. The double pass phase retardation per unit depth of the retinal nerve fiber layer varied between 0.18 and 0.40 degrees/μm, equivalent to a birefringence of 2.2 · 1

Removal of biofilms by impinging water droplets

The process of impinging water droplets on Streptococcus mutans biofilms was studied experimentally and numerically. Droplets were experimentally produced by natural breakup of a cylindrical liquid jet. Droplet diameter and velocity were varied between 20 and 200¿µm and between 20 and 100 m/s, respectively. The resulting erosion process of the biofilm was determined experimentally with high-speed recording techniques and a quantitative relationship between the removal rate, droplet size, and velocity was determined. The shear stress and the pressure on the surface during droplet impact were determined by numerical simulations, and a qualitative agreement between the experiment and the simulation was obtained. Furthermore, it was shown that the stresses on the surface are strongly reduced when a water film is present

Ultra-high resolution Fourier domain optical coherence tomography for old master paintings

In the last 10 years, Optical Coherence Tomography (OCT) has been successfully applied to art conservation, history and archaeology. OCT has the potential to become a routine non-invasive tool in museums allowing cross-section imaging anywhere on an intact object where there are no other methods of obtaining subsurface information. While current commercial OCTs have shown potential in this field, they are still limited in depth resolution (> 4 μm in paint and varnish) compared to conventional microscopic examination of sampled paint cross-sections (~1 μm). An ultrahigh resolution fiber-based Fourier domain optical coherence tomography system with a constant axial resolution of 1.2 μm in varnish or paint throughout a depth range of 1.5 mm has been developed. While Fourier domain OCT of similar resolution has been demonstrated recently, the sensitivity roll-off of some of these systems are still significant. In contrast, this current system achieved a sensitivity roll-off that is less than 2 dB over a 1.2 mm depth range with an incident power of ~1 mW on the sample. The high resolution and sensitivity of the system makes it convenient to image thin varnish and glaze layers with unprecedented contrast. The non-invasive 'virtual' cross-section images obtained with the system show the thin varnish layers with similar resolution in the depth direction but superior clarity in the layer interfaces when compared with conventional optical microscope images of actual paint sample cross-sections obtained microdestructively

Prevalence of sexual harassment among Norwegian female elite athletes in relation to sport type

Although it is often assumed that the prevalence of sexual harassment is different in different sports, this assumption has not been empirically tested. This study considers whether the experience of sexual harassment varies by sport. The female elite athletes (N = 553) in the study participated in 56 different sport disciplines. These were grouped as follows :1) team or individual sports; 2) extent to which clothing required for competition is revealing ; 3) gender structure (male-or female dominated membership statistics); and 4) gender culture (masculine, gender-neutral, or feminine). The data show that sexual harassment occurs in every sport group. Female elite athletes who participated in ‘masculine’ sports appear to experience more harassment than women in the other groups. We conclude that, when it comes to female athletes’ experiences of sexual harassment, sport type matters far less than sport participation per se

HOW RELIABLE IS IN SITU SATURATION MONITORING (ISSM) USING X-RAY?

ABSTRACT In core flooding studies, where fluids are injected to mobilize hydrocarbons, X-ray measurements are often used to monitor the hydrocarbon saturations in the core. This is done as a function of the position in the core and as a function of time. The goal is to understand how effective the injected fluids can displace the hydrocarbons, and to measure how much hydrocarbons are left behind in the core. The calculation of in place saturations from X-ray, however, is not straightforward, and it is often unclear what the uncertainties in the calculated saturations are. In this paper, we compare calculated saturations from X-ray with saturations from direct measurement of produced hydrocarbon volumes from the core. The direct measurement is obtained using a novel apparatus which measures the production of oil using a balance under a back pressure. We show that differences between the two methods can be quite substantial and we discuss what may be the reasons causing these differences. The paper ends with a discussion on how we can improve the use of in situ saturation monitoring for unsteady state experiments