H 2 production based on RDG and assisted by a weak grid: System topology, operation and control

The Renewable Distributed Generation (RDG), such as production of electricity in the vicinity of the load, it is particularly beneficial when the distribution network is "weak" facing specific demands, as in hydrogen production systems connected to rural electrification networks. In these areas, the wind resource may be suitable for this type of generation. This work proposes the topology and the operation and control strategy for a hydrogen production station, "assisted" by a weak AC grid and "powered" by a variable speed wind turbine based on a three-phase double stator induction machine. The wind energy conversion is optimized through adequate control of the generator. The electrolyzer current is regulated for the maximum utilization of the generated power. The high-speed power fluctuations by turbulence are compensated through a controlled energy storage system based on a flywheel. In addition, the system configuration, its operation mode and control, and simulation results are presented.Fil: Camocardi, Pablo Andrés. Universidad Nacional de La Plata. Facultad de Ingeniería. Departamento de Electrotecnia. Laboratorio de Electrónica Industrial, Control e Instrumentación; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; ArgentinaFil: Toccaceli, Graciela Mabel. Universidad Nacional de La Plata. Facultad de Ingeniería. Departamento de Electrotecnia. Laboratorio de Electrónica Industrial, Control e Instrumentación; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; ArgentinaFil: Battaiotto, P. E.. Universidad Nacional de La Plata. Facultad de Ingeniería. Departamento de Electrotecnia. Laboratorio de Electrónica Industrial, Control e Instrumentación; ArgentinaFil: Cendoya, Marcelo Gustavo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; Argentina. Universidad Nacional de La Plata. Facultad de Ingeniería. Departamento de Electrotecnia. Laboratorio de Electrónica Industrial, Control e Instrumentación; Argentin

Resequencing the Vrs1 gene in Spanish barley landraces revealed reversion of six-rowed to two-rowed spike

Six-rowed spike 1 (Vrs1) is a gene of major importance for barley breeding and germplasm management as it is the main gene determining spike row-type (2-rowed vs. 6-rowed). This is a widely used DUS trait, and has been often associated to phenotypic traits beyond spike type. Comprehensive re-sequencing Vrs1 revealed three two-rowed alleles (Vrs1.b2; Vrs1.b3; Vrs1.t1) and four six-rowed (vrs1.a1; vrs1.a2; vrs1.a3; vrs1.a4) in the natural population. However, the current knowledge about Vrs1 alleles and its distribution among Spanish barley subpopulations is still underexploited. We analyzed the gene in a panel of 215 genotypes, made of Spanish landraces and European cultivars. Among 143 six-rowed accessions, 57 had the vrs1.a1 allele, 83 were vrs1.a2, and three showed the vrs1.a3 allele. Vrs1.b3 was found in most two-rowed accessions, and a new allele was observed in 7 out of 50 two-rowed Spanish landraces. This allele, named Vrs1.b5, contains a ‘T’ insertion in exon 2, originally proposed as the causal mutation giving rise to the six-row vrs1.a2 allele, but has an additional upstream deletion that results in the change of 15 amino acids and a potentially functional protein. We conclude that eight Vrs1 alleles (Vrs1.b2, Vrs1.b3, Vrs1.b5, Vrs1.t1, vrs1.a1, vrs1.a2, vrs1.a3, vrs1.a4) discriminate two and six-rowed barleys. The markers described will be useful for DUS identification, plant breeders, and other crop scientists.This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness grants AGL2010-21929, AGL2013-48756-R, RFP2012-00015-00-00, RTA2012-00033-C03-02, and EUI2009-04075 (national code for Plant-KBBE project ExpResBar). CPC was funded by the Spanish Ministry of Economy, Industry and Competitiveness grant no. BES-2011-045905 (linked to project AGL2010-21929). TK and SS were supported by a research fund by the Ministry of Agriculture, Forestry, and Fisheries of Japan (Genomics for Agricultural Innovation grants no. TRS1002). SS was supported by a Grant-in-Aid from the Japan Society for the Promotion of Science (JSPS) Postdoctoral Fellow for Research Abroad and a Grant-in-Aid for Young Scientists (B) (no. 16 K18635)

Candidate genes underlying QTL for flowering time and their interactions in a wide spring barley (Hordeum vulgare L.) cross

Response to vernalization and photoperiod are the main determinants controlling the time to flowering in temperate cereals. While the individual genes that determine a plant's response to these environmental signals are well characterized, the combinatorial effect on flowering time of allelic variants for multiple genes remains unresolved. This study investigated the genetic control of flowering-time in a biparental population of spring barley, derived from a wide cross between a late-flowering European and an early-flowering North-American cultivar. While the major flowering time genes are not segregating in the Beka × Logan cross, large variation in flowering was observed. We identified five QTL, with both parents found to contribute early alleles. The catalog of QTL discovered aligns with several candidate genes affecting flowering time in barley. The combination of particular alleles at HvCEN, HvELF3 and HvFT1 in Logan are responsible for the earliness of this cultivar. Interestingly, earliness for flowering could be further enhanced, with Beka found to contribute three early alleles, including a QTL co-locating with a HvFD-like gene, suggesting that there are diverse aspects of the flowering-time pathway that have been manipulated in these two cultivars. Epistatic interactions between flowering-time QTL or candidate genes were observed in field data and confirmed under controlled conditions. The results of this study link photoperiod-dependent flowering-time genes with earliness per se genes into a single model, thus providing a unique framework that can be used by geneticists and breeders to optimize flowering time in barley.This work was supported by the Spanish Ministry of Economy and Competitiveness (grant numbers AGL2010-21929 and AGL2013-48756-R), the Spanish Ministry of Economy and Competitiveness, the Agencia Estatal de Investigación, and the European Regional Development Fund (grant number AGL2016–80967-R), and Government of Aragon (Research Group A08_20R)

Perspectives on Low Temperature Tolerance and Vernalization Sensitivity in Barley: Prospects for Facultative Growth Habit

[EN] One option to achieving greater resiliency for barley production in the face of climate change is to explore the potential of winter and facultative growth habits: for both types, low temperature tolerance (LTT) and vernalization sensitivity are key traits. Sensitivity to short-day photoperiod is a desirable attribute for facultative types. In order to broaden our understanding of the genetics of these phenotypes, we mapped quantitative trait loci (QTLs) and identified candidate genes using a genome-wide association studies (GWAS) panel composed of 882 barley accessions that was genotyped with the Illumina 9K single-nucleotide polymorphism (SNP) chip. Fifteen loci including 5 known and 10 novel QTL/genes were identified for LTT—assessed as winter survival in 10 field tests and mapped using a GWAS meta-analysis. FR-H1, FR-H2, and FR-H3 were major drivers of LTT, and candidate genes were identified for FR-H3. The principal determinants of vernalization sensitivity were VRN-H1, VRN-H2, and PPD-H1. VRN-H2 deletions conferred insensitive or intermediate sensitivity to vernalization. A subset of accessions with maximum LTT were identified as a resource for allele mining and further characterization. Facultative types comprised a small portion of the GWAS panel but may be useful for developing germplasm with this growth habitSISupport was provided by the USDA-NIFA TCAP Project no. 2011-68002-3002

Perspectives on Low Temperature Tolerance and Vernalization Sensitivity in Barley: Prospects for Facultative Growth Habit

15 Pags.- 5 Figs.- 3 TAbls.- Supp. Mat. Copyright Owner, the Authors. Under LicenceCC BY 4.0.One option to achieving greater resiliency for barley production in the face of climate change is to explore the potential of winter and facultative growth habits: for both types, low temperature tolerance (LTT) and vernalization sensitivity are key traits. Sensitivity to short-day photoperiod is a desirable attribute for facultative types. In order to broaden our understanding of the genetics of these phenotypes, we mapped quantitative trait loci (QTLs) and identified candidate genes using a genome-wide association studies (GWAS) panel composed of 882 barley accessions that was genotyped with the Illumina 9K single-nucleotide polymorphism (SNP) chip. Fifteen loci including 5 known and 10 novel QTL/genes were identified for LTT—assessed as winter survival in 10 field tests and mapped using a GWAS meta-analysis. FR-H1, FR-H2, and FR-H3 were major drivers of LTT, and candidate genes were identified for FR-H3. The principal determinants of vernalization sensitivity were VRN-H1, VRN-H2, and PPD-H1. VRN-H2 deletions conferred insensitive or intermediate sensitivity to vernalization. A subset of accessions with maximum LTT were identified as a resource for allele mining and further characterization. Facultative types comprised a small portion of the GWAS panel but may be useful for developing germplasm with this growth habit.Support was provided by the USDA-NIFA TCAP Project no. 2011-68002-30029.Peer reviewe

Mapa de anomalía de Bouguer del Pirineo Suroccidental

Las relaciones geométricas y cinemáticas entre las unidades de basamento de los Pirineos Suroccidentales, específicamente entre la terminación de la Zona Axial y el afloramiento de los Macizos Vascos, son desconocidas y potencialmente muy complejas (Oliva-Urcia, 2018). La gravimetría se ha aplicado con éxito en otras regiones pirenaicas para resolver la geometría de las unidades de cobertera y basamento debido al contraste de densidad existente en las rocas involucradas. Con el objetivo de resolver dichas relaciones y sus implicaciones en la comprensión 4D de esta parte de la cadena, hemos llevado a cabo un exhaustivo programa de adquisición de datos gravimétricos (2018-2020) entre los valles de Salazar (al oeste) y del Aragón Subordán (hacia el este) en el marco del proyecto 3DGeoEU (GeoERA-H2020). Más de 1500 nuevas estaciones (varias de ellas en alta montaña) junto con > 1700 puntos de la base de datos SITOPO, ¿ 1200 de campañas mineras, y > 500 de anteriores proyectos del IGME hacen un total de > 5000 estaciones gravimétricas armonizadas. Además, se han recopilado > 500 datos de densidad de bases de datos o muestreados en el campo. En este trabajo presentaremos los mapas de anomalías Bouguer y de anomalía residual obtenidos, junto con una revisión de las principales estructuras cartográficas en la zona

Impact of COVID-19 on cardiovascular testing in the United States versus the rest of the world

Objectives: This study sought to quantify and compare the decline in volumes of cardiovascular procedures between the United States and non-US institutions during the early phase of the coronavirus disease-2019 (COVID-19) pandemic. Background: The COVID-19 pandemic has disrupted the care of many non-COVID-19 illnesses. Reductions in diagnostic cardiovascular testing around the world have led to concerns over the implications of reduced testing for cardiovascular disease (CVD) morbidity and mortality. Methods: Data were submitted to the INCAPS-COVID (International Atomic Energy Agency Non-Invasive Cardiology Protocols Study of COVID-19), a multinational registry comprising 909 institutions in 108 countries (including 155 facilities in 40 U.S. states), assessing the impact of the COVID-19 pandemic on volumes of diagnostic cardiovascular procedures. Data were obtained for April 2020 and compared with volumes of baseline procedures from March 2019. We compared laboratory characteristics, practices, and procedure volumes between U.S. and non-U.S. facilities and between U.S. geographic regions and identified factors associated with volume reduction in the United States. Results: Reductions in the volumes of procedures in the United States were similar to those in non-U.S. facilities (68% vs. 63%, respectively; p = 0.237), although U.S. facilities reported greater reductions in invasive coronary angiography (69% vs. 53%, respectively; p < 0.001). Significantly more U.S. facilities reported increased use of telehealth and patient screening measures than non-U.S. facilities, such as temperature checks, symptom screenings, and COVID-19 testing. Reductions in volumes of procedures differed between U.S. regions, with larger declines observed in the Northeast (76%) and Midwest (74%) than in the South (62%) and West (44%). Prevalence of COVID-19, staff redeployments, outpatient centers, and urban centers were associated with greater reductions in volume in U.S. facilities in a multivariable analysis. Conclusions: We observed marked reductions in U.S. cardiovascular testing in the early phase of the pandemic and significant variability between U.S. regions. The association between reductions of volumes and COVID-19 prevalence in the United States highlighted the need for proactive efforts to maintain access to cardiovascular testing in areas most affected by outbreaks of COVID-19 infection

Nuevos elementos finitos para el análisis dinámico elastoplástico no lineal de estructuras laminares

Los objetivos de este trabajo se enmarcan en el análisis de estructuras laminares delgadas sometidas a un régimen dinámico de cargas, que dan origen a grandes cambios de forma sobre la estructura. Se consideran dos nuevas formulaciones de elementos finitos de lámica delgada, siendo una de ellas una nueva formulación que solo considera los desplazamientos de la superficie media del elemento como variables cinemáticas, independizándose de los grados rotacionales de libertad.Postprint (published version

Nuevos elementos finitos para el análisis dinámico elastoplástico no lineal de estructuras laminares

Los objetivos de este trabajo se enmarcan en el análisis de estructuras laminares delgadas sometidas a un régimen dinámico de cargas, que dan origen a grandes cambios de forma sobre la estructura. Se consideran dos nuevas formulaciones de elementos finitos de lámica delgada, siendo una de ellas una nueva formulación que solo considera los desplazamientos de la superficie media del elemento como variables cinemáticas, independizándose de los grados rotacionales de libertad