Nimbus-7 Scanning Multichannel Microwave Radiometer (SMMR) PARM tape user's guide

The Scanning Multichannel Microwave Radiometer (SMMR) instrument, onboard the Nimbus-7 spacecraft, collected data from Oct. 1978 until Jun. 1986. The data were processed to physical parameter level products. Geophysical parameters retrieved include the following: sea-surface temperatures, sea-surface windspeed, total column water vapor, and sea-ice parameters. These products are stored on PARM-LO, PARM-SS, and PARM-30 tapes. The geophysical parameter retrieval algorithms and the quality of these products are described for the period between Nov. 1978 and Oct 1985. Additionally, data formats and data availability are included

Non-optical Imaging of Flow, Boiling, and Salt Deposition in a Simulated Debris Bed

Determining flow and heat transfer characteristics in a debris bed or a packed bed is difficult due to the lack of optical access. Non-optical imaging methods, such as x-ray or neutron imaging, can be used to observe flow characteristics and particle deposition, as well as boiling in a packed bed. An amorphous Silicon detector based digital radiography camera can be used to image with either x-rays or neutrons at up to 100 frames per second. The digital radiography camera, coupled with digital image analysis techniques was used to characterize fluid fraction and flow rates in a simulated debris bed. A water percolation experiment was performed where a test section filled with 1-3 mm glass particles was used as a simulated debris bed, and properties such as packing fraction, volumetric flow rate, and evaporation rate were calculated both physically and using data from the images. The values obtained using the images were benchmarked against the physically calculated values and found to be in agreement, validating the image processing algorithms

Cost-effectiveness and efficacy of fluoride varnish for caries prevention in South African children: A cluster-randomized controlled community trial

Objectives: This cluster-randomized controlled community trial aimed to assess the efficacy and costs of fluoride varnish (FV) application for caries prevention in a high-risk population in South Africa. Methods: 513 children aged 4–8 years from two schools in a township in South Africa were randomly allocated by class to the FV or Control (CO) groups. In addition to supervised toothbrushing with fluoridated toothpaste in both groups, FV was applied in 3-month intervals by trained local non-professional assistants. Intraoral examinations were conducted at baseline, 12, 21 and 24 months. Primary outcome was the increment of teeth with cavitated lesions (i.e. newly developed or progressed, formerly non-cavitated lesions), requiring restoration or extraction over the study period. Additionally, treatment and re-treatment costs were analyzed. Results: 513 children (d1-4mft 5.9 ± 4.3 (mean ± SD)) were randomly allocated to FV (n = 287) or CO (n = 226). 10.2% FV and CO teeth received or required a restoration; 3.9% FV and 4.1% CO teeth were extracted, without significant differences between groups. While FV generated high initial costs, follow-up costs were comparable in both groups, resulting in FV being significantly more expensive than CO (1667 ± 1055 ZAR vs. 950 ± 943 ZAR, p < .001). Conclusions: Regular FV application, in addition to daily supervised toothbrushing, had no significant caries-preventive effect and was not cost-effective in a primary school setting within a peri-urban, high-risk community in South Africa. Alternative interventions on community or public health level should be considered to reduce the caries burden in high-risk communities

Calculation of the properties of the rotational bands of 155,157^{155,157}Gd

We reexamine the long-standing problem of the microscopic derivation of a particle-core coupling model. We base our research on the Klein-Kerman approach, as amended by D\"onau and Frauendorf. We describe the formalism to calculate energy spectra and transition strengths in some detail. We apply our formalism to the rotational nuclei $^{155,157}$Gd, where recent experimental data requires an explanation. We find no clear evidence of a need for Coriolis attenuation.Comment: 27 pages, 13 uuencoded postscript figures. Uses epsf.st

Stability and Representation Dependence of the Quantum Skyrmion

A constructive realization of Skyrme's conjecture that an effective pion mass ``may arise as a self consistent quantal effect'' based on an ab initio quantum treatment of the Skyrme model is presented. In this quantum mechanical Skyrme model the spectrum of states with $I=J$, which appears in the collective quantization, terminates without any infinite tower of unphysical states. The termination point depends on the model parameters and the dimension of the SU(2) representation. Representations, in which the nucleon and $\Delta_{33}$ resonance are the only stable states, exist. The model is developed for both irreducible and reducible representations of general dimension. States with spin larger than 1/2 are shown to be deformed. The representation dependence of the baryon observables is illustrated numerically.Comment: 19 pages, Late

Nimbus-7 TOMS Version 7 Calibration

This report describes an improved instrument characterization used for the Version 7 processing of the Nimbus-7 Total Ozone Mapping Spectrometer (TOMS) data record. An improved internal calibration technique referred to as spectral discrimination is used to provide long-term calibration precision of +/- 1%/decade in total column ozone amount. A revised wavelength scale results in a day one calibration that agrees with other satellite and ground-based measurements of total ozone, while a wavelength independent adjustment of the initial radiometric calibration constants provides good agreement with surface reflectivity measured by other satellite-borne ultraviolet measurements. The impact of other aspects of the Nimbus-7 TOMS instrument performance are also discussed. The Version 7 data should be used in all future studies involving the Nimbus-7 TOMS measurements of ozone. The data are available through the NASA Goddard Space Flight Center's Distributive Active Archive Center (DAAC)

Foundations of self-consistent particle-rotor models and of self-consistent cranking models

The Kerman-Klein formulation of the equations of motion for a nuclear shell model and its associated variational principle are reviewed briefly. It is then applied to the derivation of the self-consistent particle-rotor model and of the self-consistent cranking model, for both axially symmetric and triaxial nuclei. Two derivations of the particle-rotor model are given. One of these is of a form that lends itself to an expansion of the result in powers of the ratio of single-particle angular momentum to collective angular momentum, that is essentual to reach the cranking limit. The derivation also requires a distinct, angular-momentum violating, step. The structure of the result implies the possibility of tilted-axis cranking for the axial case and full three-dimensional cranking for the triaxial one. The final equations remain number conserving. In an appendix, the Kerman-Klein method is developed in more detail, and the outlines of several algorithms for obtaining solutions of the associated non-linear formalism are suggested.Comment: 29 page

High temperature MBE of graphene on sapphire and hexagonal boron nitride flakes on sapphire

The discovery of graphene and its remarkable electronic properties has provided scientists with a revolutionary material system for electronics and optoelectronics. Here, the authors investigate molecular beam epitaxy (MBE) as a growth method for graphene layers. The standard dual chamber GENxplor has been specially modified by Veeco to achieve growth temperatures of up to 1850 _C in ultrahigh vacuum conditions and is capable of growth on substrates of up to 3 in. in diameter. To calibrate the growth temperatures, the authors have formed graphene on the Si-face of SiC by heating wafers to temperatures up to 1400 _C and above. To demonstrate the scalability, the authors have formed graphene on SiC substrates with sizes ranging from 10 _ 10mm2 up to 3-in. in diameter. The authors have used a carbon sublimation source to grow graphene on sapphire at substrate temperatures between 1000 and 1650 _C (thermocouple temperatures). The quality of the graphene layers is significantly improved by growing on hexagonal boron nitride (h-BN) substrates. The authors observed a significant difference in the sticking coefficient of carbon on the surfaces of sapphire and h-BN flakes. Our atomic force microscopy measurements reveal the formation of an extended hexagonal moir_e pattern when our MBE layers of graphene on h-BN flakes are grown under optimum conditions. The authors attribute this moir_e pattern to the commensurate growth of crystalline graphene on h-BN

ADEOS Total Ozone Mapping Spectrometer (TOMS) Data Products User's Guide

Two data products from the Total Ozone Mapping Spectrometer (ADEOS/TOMS) have been archived at the Distributed Active Archive Center, in the form of Hierarchical Data Format files. The ADEOS/ TOMS began taking measurements on September 11, 1996, and ended on June 29, 1997. The instrument measured backscattered Earth radiance and incoming solar irradiance; their ratio was used in ozone retrievals. Changes in the reflectivity of the solar diffuser used for the irradiance measurement were monitored using a carousel of three diffusers, each exposed to the degrading effects of solar irradiation at different rates. The algorithm to retrieve total column ozone compares measured Earth radiances at sets of three wavelengths with radiances calculated for different total ozone values, solar zenith angles, and optical paths. The initial error in the absolute scale for TOMS total ozone is 3 percent, the one standard deviation random error is 2 percent, and the drift is less than 0.5 percent over the 9-month data record. The Level 2 product contains the measured radiances, the derived total ozone amount, and reflectivity information for each scan position. The Level 3 product contains daily total ozone and reflectivity in a 1-degree latitude by 1.25 degrees longitude grid. The Level 3 files containing estimates of UVB at the Earth surface and tropospheric aerosol information will also be available. Detailed descriptions of both HDF data files and the CDROM product are provided

Earth Probe Total Ozone Mapping Spectrometer (TOMS) Data Product User's Guide

Two data products from the Earth Probe Total Ozone Mapping Spectrometer (EP/TOMS) have been archived at the Distributed Active Archive Center, in the form of Hierarchical Data Format files. The EP/ TOMS began taking measurements on July 15, 1996. The instrument measures backscattered Earth radiance and incoming solar irradiance; their ratio is used in ozone retrievals. Changes in the reflectivity of the solar diffuser used for the irradiance measurement are monitored using a carousel of three diffusers, each exposed to the degrading effects of solar irradiation at different rates. The algorithm to retrieve total column ozone compares measured Earth radiances at sets of three wavelengths with radiances calculated for different total ozone values. The initial error in the absolute scale for TOMS total ozone is 3 percent, the one standard deviation random error is 2 percent, and the drift is less than 0.5 percent over the first year of data. The Level-2 product contains the measured radiances, the derived total ozone amount, and reflectivity information for each scan position. The Level-3 product contains daily total ozone and reflectivity in a 1-degree latitude by 1.25 degrees longitude grid. Level-3 files containing estimates of LTVB at the Earth surface and tropospheric aerosol information are also available, Detailed descriptions of both HDF data-files and the CD-ROM product are provided