Vibronic coupling in the superoxide anion: The vibrational dependence of the photoelectron angular distribution

We present a comprehensive photoelectron imaging study of the O₂(X³Σg⁻,v′=0–6)←O₂⁻(X²Πg,v′′=0) and O₂(a¹Δg,v′=0–4)←O₂⁻(X²Πg,v′′=0)photodetachment bands at wavelengths between 900 and 455 nm, examining the effect of vibronic coupling on the photoelectron angular distribution (PAD). This work extends the v′=1–4 data for detachment into the ground electronic state, presented in a recent communication [R. Mabbs, F. Mbaiwa, J. Wei, M. Van Duzor, S. T. Gibson, S. J. Cavanagh, and B. R. Lewis, Phys. Rev. A82, 011401–R (2010)]. Measured vibronic intensities are compared to Franck–Condon predictions and used as supporting evidence of vibronic coupling. The results are analyzed within the context of the one-electron, zero core contribution (ZCC) model [R. M. Stehman and S. B. Woo, Phys. Rev. A23, 2866 (1981)]. For both bands, the photoelectron anisotropy parameter variation with electron kinetic energy,β(E), displays the characteristics of photodetachment from a d-like orbital, consistent with the π∗g 2p highest occupied molecular orbital of O₂⁻. However, differences exist between the β(E) trends for detachment into different vibrational levels of the X³Σg⁻ and a ¹Δg electronic states of O₂. The ZCC model invokes vibrational channel specific “detachment orbitals” and attributes this behavior to coupling of the electronic and nuclear motion in the parent anion. The spatial extent of the model detachment orbital is dependent on the final state of O₂: the higher the neutral vibrational excitation, the larger the electron binding energy. Although vibronic coupling is ignored in most theoretical treatments of PADs in the direct photodetachment of molecular anions, the present findings clearly show that it can be important. These results represent a benchmark data set for a relatively simple system, upon which to base rigorous tests of more sophisticated models.The authors gratefully acknowledge support by the National Science Foundation Grant No. CHE-0748738 and ANU ARC Discovery Projects under Grant Nos. DP0666267 and DP0880850

Ultrathin Oxide Films by Atomic Layer Deposition on Graphene

In this paper, a method is presented to create and characterize mechanically robust, free standing, ultrathin, oxide films with controlled, nanometer-scale thickness using Atomic Layer Deposition (ALD) on graphene. Aluminum oxide films were deposited onto suspended graphene membranes using ALD. Subsequent etching of the graphene left pure aluminum oxide films only a few atoms in thickness. A pressurized blister test was used to determine that these ultrathin films have a Young's modulus of 154 \pm 13 GPa. This Young's modulus is comparable to much thicker alumina ALD films. This behavior indicates that these ultrathin two-dimensional films have excellent mechanical integrity. The films are also impermeable to standard gases suggesting they are pinhole-free. These continuous ultrathin films are expected to enable new applications in fields such as thin film coatings, membranes and flexible electronics.Comment: Nano Letters (just accepted

Vibronic coupling in the superoxide anion: the vibrational dependence of the photoelectron angular distribution

We present a comprehensive photoelectron imaging study of the O2(X 3Σg−,v′ = 0–6)←O2−(X 2Πg,v″ = 0) and O2(a 1Δg,v′ = 0–4)←O2−(X 2Πg,v″ = 0) photodetachment bands at wavelengths between 900 and 455 nm, examining the effect of vibronic coupling on the photoelectron angular distribution (PAD). This work extends the v′ = 1–4 data for detachment into the ground electronic state, presented in a recent communication. Measured vibronic intensities are compared to Franck–Condon predictions and used as supporting evidence of vibronic coupling. The results are analyzed within the context of the one-electron, zero core contribution (ZCC) model. For both bands, the photoelectron anisotropy parameter variation with electron kinetic energy, β(E), displays the characteristics of photodetachment from a d-like orbital, consistent with the πg∗ 2p highest occupied molecular orbital of O2−. However, differences exist between the β(E) trends for detachment into different vibrational levels of the X 3Σg− and a 1Δg electronic states of O2. The ZCC model invokes vibrational channel specific “detachment orbitals” and attributes this behavior to coupling of the electronic and nuclear motion in the parent anion. The spatial extent of the model detachment orbital is dependent on the final state of O2: the higher the neutral vibrational excitation, the larger the electron binding energy. Although vibronic coupling is ignored in most theoretical treatments of PADs in the direct photodetachment of molecular anions, the present findings clearly show that it can be important. These results represent a benchmark data set for a relatively simple system, upon which to base rigorous tests of more sophisticated models

A guide to photosynthetic gas exchange measurements:Fundamental principles, best practice and potential pitfalls

Gas exchange measurements enable mechanistic insights into the processes that underpin carbon and water fluxes in plant leaves which in turn inform understanding of related processes at a range of scales from individual cells to entire ecosytems. Given the importance of photosynthesis for the global climate discussion it is important to (a) foster a basic understanding of the fundamental principles underpinning the experimental methods used by the broad community, and (b) ensure best practice and correct data interpretation within the research community. In this review, we outline the biochemical and biophysical parameters of photosynthesis that can be investigated with gas exchange measurements and we provide step‐by‐step guidance on how to reliably measure them. We advise on best practices for using gas exchange equipment and highlight potential pitfalls in experimental design and data interpretation. The Supporting Information contains exemplary data sets, experimental protocols and data‐modelling routines. This review is a community effort to equip both the experimental researcher and the data modeller with a solid understanding of the theoretical basis of gas‐exchange measurements, the rationale behind different experimental protocols and the approaches to data interpretation

2‐Methyltetrahydrofuran (2‐MeTHF) as a versatile green solvent for the synthesis of amphiphilic copolymers via ROP, FRP, and RAFT tandem polymerizations

2‐methyltetrahydrofuran (2‐MeTHF) is a readily available, inexpensive, neoteric, bio‐based solvent. It has been adopted across a wide range of chemical processes including the batch manufacture of fine chemicals, enzymatic polycondensations and ring opening polymerizations. To reduce the environmental burden related to the synthesis of pharmaceutical‐grade polymers based on lactide and caprolactone, we envisaged the use of 2‐MeTHF. For the first time, we combined a series of metal‐free and enzymatic ROPs with free radical and controlled RAFT polymerizations (carried out separately and in tandem) in 2‐MeTHF, in order to easily tune the chemistry and the architecture of the final polymers. After a simple purification, the amphiphilic polymers were formulated into nanoparticles and tested for their cytocompatibility in three model cell lines, to assess their application as potential polymeric excipients for nanomedicines

A ‘greener’ one-pot synthesis of monoterpene-functionalised lactide oligomers

© 2020 Elsevier Ltd In this work we aimed to achieve a totally sustainable Ring Opening Polymerisation (ROP) process, by harmonising the use of naturally occurring or derivable initiators and the green solvent 2-Methyltetrahydrofuran (2-MeTHF). First, a library of novel monoterpene-alcohols and existing terpenoids was used to provide renewably sourced initiators for a metal-free ROP synthetic step. A number of these initiators are derived from waste materials, further improving their sustainability. Secondly, we selected lactide (LA) as a monomer, because not only is it derived from biomass, but its resultant polymers are biocompatible and biodegradable. Interestingly, these new polymers self-assembled in water producing well defined, biocompatible nanoparticles (NPs) via direct nanoprecipitation without the use of additional stabilisers. We have highlighted a novel and promising (ROP) approach to produce biodegradable, amphiphilic ester-based macromolecules, based on lactide and terpenes (as initiators) in a green solvent, 2-MeTHF thus reducing solvent toxicity in an efficient, simple and sustainable new synthesis. The monoterpenes may provide a highly functionalisable and bio-renewable toolbox for a new generation of ROP initiators

Accumulative Difference Image Protocol for Particle Tracking in Fluorescence Microscopy Tested in Mouse Lymphonodes

The basic research in cell biology and in medical sciences makes large use of imaging tools mainly based on confocal fluorescence and, more recently, on non-linear excitation microscopy. Substantially the aim is the recognition of selected targets in the image and their tracking in time. We have developed a particle tracking algorithm optimized for low signal/noise images with a minimum set of requirements on the target size and with no a priori knowledge of the type of motion. The image segmentation, based on a combination of size sensitive filters, does not rely on edge detection and is tailored for targets acquired at low resolution as in most of the in-vivo studies. The particle tracking is performed by building, from a stack of Accumulative Difference Images, a single 2D image in which the motion of the whole set of the particles is coded in time by a color level. This algorithm, tested here on solid-lipid nanoparticles diffusing within cells and on lymphocytes diffusing in lymphonodes, appears to be particularly useful for the cellular and the in-vivo microscopy image processing in which few a priori assumption on the type, the extent and the variability of particle motions, can be done

Glycerol- and diglycerol-based polyesters: Evaluation of backbone alterations upon nano-formulation performance

Despite the success of polyethylene glycol-based (PEGylated) polyesters in the drug delivery and biomedical fields, concerns have arisen regarding PEG's immunogenicity and limited biodegradability. In addition, inherent limitations, including limited chemical handles as well as highly hydrophobic nature, can restrict their effectiveness in physiological conditions of the polyester counterpart. To address these matters, an increasing amount of research has been focused towards identifying alternatives to PEG. One promising strategy involves the use of bio-derived polyols, such as glycerol. In particular, glycerol is a hydrophilic, non-toxic, untapped waste resource and as other polyols, can be incorporated into polyesters via enzymatic catalysis routes. In the present study, a systematic screening is conducted focusing on the incorporation of 1,6-hexanediol (Hex) (hydrophobic diol) into both poly(glycerol adipate) (PGA) and poly(diglycerol adipate) (PDGA) at different (di)glycerol:hex ratios (30:70; 50:50 and 70:30 mol/mol) and its effect on purification upon NPs formation. By varying the amphiphilicity of the backbone, we demonstrated that minor adjustments influence the NPs formation, NPs stability, drug encapsulation, and degradation of these polymers, despite the high chemical similarity. Moreover, the best performing materials have shown good biocompatibility in both in vitro and in vivo (whole organism) tests. As preliminary result, the sample containing diglycerol and Hex in a 70:30 ratio, named as PDGA-Hex 30%, has shown to be the most promising candidate in this small library analysed. It demonstrated comparable stability to the glycerol-based samples in various media but exhibited superior encapsulation efficiency of a model hydrophobic dye. This in-depth investigation provides new insights into the design and modification of biodegradable (di)glycerol-based polyesters, potentially paving the way for more effective and sustainable PEG-free drug delivery nano-systems in the pharmaceutical and biomedical fields

Glycerol-based sustainably sourced resin for volumetric printing

Volumetric Additive Manufacturing (VAM) represents a revolutionary advancement in the field of Additive Manufacturing, as it allows for the creation of objects in a single, cohesive process, rather than in a layer-by-layer approach. This innovative technique offers unparalleled design freedom and significantly reduces printing times. A current limitation of VAM is the availability of suitable resins with the required photoreactive chemistry and from sustainable sources. To support the application of this technology, we have developed a sustainable resin based on polyglycerol, a bioderived (e.g., vegetable origin), colourless, and easily functionisable oligomer produced from glycerol. To transform polyglycerol-6 into an acrylate photo-printable resin we adopted a simple, one-step, and scalable synthesis route. Polyglycerol-6-acrylate fulfils all the necessary criteria for volumetric printing (transparency, photo-reactivity, viscosity) and was successfully used to print a variety of models with intricate geometries and good resolution. The waste resin was found to be reusable with minimal performance issues, improving resin utilisation and minimising waste material. Furthermore, by incorporating dopants such as poly(glycerol) adipate acrylate (PGA-A) and 10,12-pentacosadyinoic acid (PCDA), we demonstrated the ability to print objects with a diverse range of functionalities, including temperature sensing probes and a polyester excipient, highlighting the potential applications of these new resins