Exploiting the Hierarchical Morphology of Single-Walled and Multi-Walled Carbon Nanotube Films for Highly Hydrophobic Coatings

Self-assembled hierarchical solid surfaces are very interesting for wetting phenomena, as observed in a variety of natural and artificial surfaces. Here, we report single-walled (SWCNT) and multi-walled carbon nanotube (MWCNT) thin films realized by a simple, rapid, reproducible, and inexpensive filtration process from an aqueous dispersion, that was deposited at room temperature by a dry-transfer printing method on glass. Furthermore, the investigation of carbon nanotube films through scanning electron microscopy (SEM) reveals the multi-scale hierarchical morphology of the self-assembled carbon nanotube random networks. Moreover, contact angle measurements show that hierarchical SWCNT/MWCNT composite surfaces exhibit a higher hydrophobicity (contact angles of up to 137{\deg}) than bare SWCNT (110{\deg}) and MWCNT (97{\deg}) coatings, thereby confirming the enhancement produced by the surface hierarchical morphology.Comment: 7 pages, 5 figures, This article is part of the Thematic Series "Self-assembly of nanostructures and nanomaterials

Super-Hydrophobic Multi-Walled Carbon Nanotube Coatings for Stainless Steel

We have taken advantage of the native surface roughness and the iron content of AISI 316 stainless steel to direct grow multi-walled carbon nanotube (MWCNT) random networks by chemical vapor deposition (CVD) at low-temperature ($< 1000^{\circ}$C), without the addition of any external catalysts or time-consuming pre-treatments. In this way, super-hydrophobic MWCNT films on stainless steel sheets were obtained, exhibiting high contact angle values ($154^{\circ}$) and high adhesion force (high contact angle hysteresis). Furthermore, the investigation of MWCNT films at scanning electron microscopy (SEM) reveals a two-fold hierarchical morphology of the MWCNT random networks made of hydrophilic carbonaceous nanostructures on the tip of hydrophobic MWCNTs. Owing to the Salvinia effect, the hydrophobic and hydrophilic composite surface of the MWCNT films supplies a stationary super-hydrophobic coating for conductive stainless steel. This biomimetical inspired surface not only may prevent corrosion and fouling but also could provide low-friction and drag-reduction.Comment: 6 pages, 3 figure

Carbon nanotube film/silicon heterojunction photodetector for new cutting-edge technological devices

Photodetector (PD) devices based on carbon nanotube/n-silicon heterojunction (NSH) have been realized, with a linear response in a large optical power range, proving competitive performances with respect to a recent nanostructure-based detector and those currently available on the market. The core of these devices is a thin semi-transparent and conductive single-walled carbon nanotubes film with a multitask role: junction element, light absorber and transmitter, photocarrier transporting layer, and charge collector. The PD exhibits rise times of some nanoseconds, detecting light from ultraviolet (240 nm) to infrared (1600 nm), and external quantum efficiency reaching 300% in the VIS spectra region

Epidemiological characteristics of COVID-19 cases and estimates of the reproductive numbers 1 month into the epidemic, Italy, 28 January to 31 March 2020

BackgroundOn 20 February 2020, a locally acquired coronavirus disease (COVID-19) case was detected in Lombardy, Italy. This was the first signal of ongoing transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in the country. The number of cases in Italy increased rapidly and the country became the first in Europe to experience a SARS-CoV-2 outbreak.AimOur aim was to describe the epidemiology and transmission dynamics of the first COVID-19 cases in Italy amid ongoing control measures.MethodsWe analysed all RT-PCR-confirmed COVID-19 cases reported to the national integrated surveillance system until 31 March 2020. We provide a descriptive epidemiological summary and estimate the basic and net reproductive numbers by region.ResultsOf the 98,716 cases of COVID-19 analysed, 9,512 were healthcare workers. Of the 10,943 reported COVID-19-associated deaths (crude case fatality ratio: 11.1%) 49.5% occurred in cases older than 80 years. Male sex and age were independent risk factors for COVID-19 death. Estimates of R0 varied between 2.50 (95% confidence interval (CI): 2.18-2.83) in Tuscany and 3.00 (95% CI: 2.68-3.33) in Lazio. The net reproduction number Rt in northern regions started decreasing immediately after the first detection.ConclusionThe COVID-19 outbreak in Italy showed a clustering onset similar to the one in Wuhan, China. R0 at 2.96 in Lombardy combined with delayed detection explains the high case load and rapid geographical spread. Overall, Rt in Italian regions showed early signs of decrease, with large diversity in incidence, supporting the importance of combined non-pharmacological control measures

Poly(3-hexyl-thiophene) coil-wrapped single wall carbon nanotube investigated by scanning tunneling spectroscopy

Scanning Tunneling Spectroscopy was performed on a (15,0) single wall carbon nanotube partially wrapped by Poly(3-hexyl-thiophene). On the bare nanotube section, the local density of states is in good agreement with the theoretical model based on local density approximation and remarkably is not perturbed by the polymer wrapping. On the coiled section, a rectifying current-voltage characteristic has been observed along with the charge transfer from the polymer to the nanotube. The electron transfer from Poly(3-hexyl-thiophene) to metallic nanotube was previously theoretically proposed and contributes to the presence of the Schottky barrier at the interface responsible for the rectifying behavior

Regioregular poly(3-hexl-thiophene) helical self-organisation on carbon nanotubes

Mixtures of Regioregular Poly(3-hexyl-thiophene) (rrP3HT) and multi wall carbon nanotubes have been investigated by Scanning Tunneling Microscopy in Ultra High Vacuum. Carbon nanotubes covered by rrP3HT have been imaged and analyzed, providing a clear evidence that this polymer self assembles on the nanotube surface following geometrical constraints and adapting its equilibrium chain-to-chain distance. Largely spaced covered nanotubes have been analyzed to investigate the role played by nanotube chirality in the polymer wrapping, evidencing strong rrP3HT interactions along well defined directions

Increasing Efficiency in Single-Walled Carbon Nanotube/n-Si Photodetectors by Voltage Doping

Single walled carbon nanotube (SWCNT) ultrathin films were deposited on n doped Si substrates provided with three electrodes for photoconductive measurements. Without illumination the devices show good rectifier properties and holes mobility in the range 105 cm/V.s which makes very promising for fast switching applications. Measuring the current voltage characteristics of the SWCNT film under illumination, an increase in the device performance is observed when a voltage VG is applied to the third electrode. In particular, increasing VG towards the breakdown region, an increase of more than 10 times is recorded in the photocurrent and in the external quantum efficiency with respect to the values measured at VG=0. The experimental data are interpreted considering a hole doping of the SWCNT film by the action of the third electrode voltage VG

Record efficiency of air-stable multi-walled carbon nanotube/silicon solar cells

Multi-walled carbon nanotube (MWCNT) films form efficient heterojunction solar cells with n-type crystalline silicon (n-Si), due to their superior optical and electrical properties. Here, we report air-stable photovoltaic devices with record photoconversion efficiency of 10%. We realized thin films consisting of MWCNTs arranged in semitransparent random networks deposited on n-Si substrates by a simple, rapid, reproducible, and inexpensive vacuum filtration process at room temperature. Such heterojunctions favor high and broadband carrier photogeneration, extending the Si spectral response from near infrared to near ultraviolet range; charge dissociation of ultrafast hot carriers [1]; transport of electrons through n-Si and high-mobility [2] holes through the MWCNT percolative network. Furthermore, by varying the MWCNT film thickness, it is possible tailoring its optical and electrical properties, therefore the overall device optoelectronic features. These results not only pave the way for low-cost, efficient, and broadband photovoltaics, but also are promising for the development of MWCNT-based optoelectronic applications