22 research outputs found
Skeletal features in patient affected by maxillary canine impaction
Objective: To analyze the skeletal features of patients with maxillary canine impaction.
Material and Methods: The complete pre-treatment records of 1674 orthodontic patients were examined. From the
subjects with maxillary impacted canine 12 patients were excluded , remaining 108. The subjects with maxillary
impacted canine were divided into two study groups: a palatally displaced canine group (PDCG) (77 patients) and
a buccally displaced canine group (BDCG) (31 patients). The values of the skeletal features measured on the lateral
cephalometric radiograph were compared with a control group (CG) of 121 subjects randomly selected from the
initial sample without maxillary canine impaction. The statistical analysis of the difference between the study
groups and the CG was tested using X2 test and Fisher's exact test. The level of significance was set at P <=0.05.
Results: The CG was characterized by increased values of A point-Nasion-B point angle (ANB) and by a retropositioned or smaller lower jaw. PDCG patients showed normal skeletal features compared to the CG, presenting
mainly I class and lower rank of II and III sagittal skeletal features. PDCG subjects presented also normal values
of the Steiner vertical skeletal relationship angles with normal facial divergence compared to the CG. PDCG cases
were also characterized by horizontal and prognathic growth. BDCG did not present significant differences in
skeletal features compared to the CG, except for an increased ANB.
Conclusions: Palatally displaced canine (PDC) was frequently the only orthodontic problem of patients and was not
associated whit altered skeletal features. The frequent absence of malocclusion in PDC patients explains the delayed
identification of this problem. BDCG patients did not present significant differences in skeletal features with respect to the orthodontic population. The presence of both buccally displaced canine (BDC) and malocclusion makes the patient with BDC both aware of the need for, and motivated to undergo, orthodontic treatment
Ceruloplasmin/Transferrin Ratio Changes in Alzheimer's Disease
The link between iron and Alzheimer's disease (AD) has been mainly investigated with a focus on the local accumulation of this metal in specific areas of the brain that are critical for AD. In the present study, we have instead looked at systemic variations of markers of iron metabolism. We measured serum levels of iron, ceruloplasmin, and transferrin and calculated the transferrin saturation and the ceruloplasmin to transferrin ratio (Cp/Tf). Cp/Tf and transferrin saturation increased in AD patients. Cp/Tf ratios also correlated positively with peroxide levels and negatively with serum iron concentrations. Elevated values of ceruloplasmin, peroxides, and Cp/Tf inversely correlated with MMSE scores. Isolated medial temporal lobe atrophy positively correlated with Cp/Tf and negatively with serum iron. All these findings indicate that the local iron accumulation found in brain areas critical for AD should be viewed in the frame of iron systemic alterations
Viscosity, Boson Peak and Elastic Moduli in the Na2O-SiO2 System
The temperature and chemical dependence of the melt viscosity are ubiquitous in the model development of the volcanic dynamics, as well as in the glass production and design. We focussed on the yet-explored relationship between the bulk and shear moduli ratio and boson peak with the melt fragility of their parental glasses. Here, we explored the extension of the observed trend by testing the conventional binary system Na2O-SiO2, thus providing new evidence supporting the link between the flow of melts and supercooled liquids and the vibrational dynamics of their parental glasses. This was accomplished by integrating new low-frequency Raman measurements and integrating data from the literature on Brillouin light scattering and viscometry. This approach allows us to feed the MYEGA equation with reliable input parameters to quantitatively predict the viscosity of the Na2O-SiO2 system from the liquid up to the glass transition
Cognitive and affective changes in mild to moderate Alzheimer's disease patients undergoing switch of cholinesterase inhibitors: a 6-month observational study.
Randomized split-mouth study on postoperative effects of palmitoylethanolamide for impacted lower third molar surgery
The aim of this study was to assess the efficacy of Normast 300\u2009mg in reducing swelling and pain after the surgical extraction of impacted lower third molars. Materials and Methods. A randomized, split-mouth, single-blind study was conducted on 30 patients between 18 and 30 years of age requiring lower third molar extraction. Patients underwent bilateral extractions in a randomized sequence, one extraction being performed under Normast treatment. The Normast treatment involved 2 tablets a day for 15 days. The parameters assessed at each procedure were trismus, swelling, pain, NSAID consumption, postoperative complications, drug tolerability, and safety. The results obtained were processed using repeated measures analysis of variance. Results. Perceived postoperative pain was reportedly significantly milder on Normast treatment than control. The trend of the means differed over time (P < .0001) and between the two extraction groups (P < .0221). On the other hand, for edema and trismus, the trend differed over time for both groups but did not differ between the two groups. Discussion. Our analyses indicate that patients experienced significantly less postoperative pain when they were treated with Normast. Conclusions. Administering Normast improves the postoperative course-in terms of pain-after lower third molar extraction
Botulinum toxin type-A treatment in spastic paraparesis: A neurophysiological study
Objective: The aim of this study was to verify the action of Botulinum toxin type-A (BoNT-A) by means of neurophysiological techniques, in patients presenting lower limb spasticity and requiring BoNT-A injections in the calf muscles, due to the poor response to medical antispastic treatment. Subjects and method: Patients presenting paraparesis were enrolled. They underwent clinical evaluation for spasticity according to the Ashworth scale and neurophysiological recordings including: motor evoked potentials (MEPs) to transcranial magnetic stimulation (TMS) of the leg area; compound motor action potential (cMAP) to tibial nerve stimulation, F-wave, and H-reflex before the treatment and 24 h, 2 weeks and 1 month after the injection of BoNT-A. In all patients, gastrocnemius was treated and in some cases soleus or tibialis posterior muscles were also injected. Results: In all patients, BoNT-A injections induced a clear clinical improvement as showed by the reduced spasticity values of the Ashworth scale. A significant increment of MEP latency and central conduction time (CCT) duration were observed 2 weeks after the treatment only in the injected muscles. Conclusions: Prolonged MEP latencies and CCT after BoNT-A injections is probably due to a central alteration in responsiveness of spinal motor neurons to descending impulses from the corticospinal tracts. Such changes represent objective parameters heralding clinical efficacy of treatment. (C) 2000 Elsevier Science B.V
Dental anomalies and clinical features in patients with maxillary canine impaction: A retrospective study
Objective: To analyze the prevalence, distribution, clinical features, and relationship with dental anomalies of maxillary canine impaction. Materials and Methods: The complete pretreatment records of 1674 orthodontic patients were examined. Subjects with maxillary impacted canines were divided into two study groups: a palatally displaced canine (PDC) group (114 patients) and a buccally displaced canine (BDC) group (37 patients). These were compared to a control group of 151 patients who were randomly selected from the initial sample without maxillary canine impaction. The significance of associations between canine impaction and dental and clinical features and anomalies was examined with the chi-square test. Results: PDC patients presented with normal overjet and facial profile and a lower degree of dental arch crowding in comparison to the control patients. PDC patients showed a higher prevalence of impaction of other teeth, dental aplasia, transposition, and peg-shaped maxillary lateral incisors (odds ratios 3.3, 2.6, 8.3, and 5.8, respectively). Conclusion: PDC was frequently the only orthodontic problem of patients. BDC group patients did not present with notable differences in clinical and dental features or dental anomalies compared to control subjects. © 2013 by The EH Angle Education and Research Foundation, Inc
Ultrafast high-temperature sintering (UHS) vs. conventional sintering of 3YSZ: Microstructure and properties
International audienceDoped-zirconia finds several applications as strucutral material and in different electrochemical devices; moreover, it is considered a model ceramic system. The consolidation of 3 mol% Y2O3 stabilized ZrO2 (3YSZ) by rapid sintering (flash processes) has yielded unusual properties like higher hardness and thinner electrochemical grain boundaries. To explore the effect of high heating rate and distinguish it from field-induced phenomena, we investigated and compared UHS (Ultrafast high-temperature sintering) with conventional heating with and without an electric field.The results show that: i) UHS allows ultra-rapid consolidation (<30 s) of YSZ nanopowders (≈20 nm) with a densification pathway different from conventional sintering in terms of microstructural evolution (UHS allows a grain size reduction by more than 60% at a fixed desnity level); ii) the electric field plays a minor role in sintering, microstructure evolution, and properties; iii) UHS does not affect the hardness and the grain boundary electrochemical properties of the sintered bodies. Whereas similarities can be pointed out between UHS and flash-related techniques in terms of accelerated densification and microstructure, the final properties are rather different with UHS YSZ being more similar to conventional sintering