Effectiveness of entomopathogenic nematodes in the control of Cydia pomonella larvae in Northern Italy

Since 2006, a large scale research on the effectiveness of entomopathogenic nematodes (EPN) in the control of codling moth (CM), Cydia pomonella, overwintering larvae has been performed on about 35 ha of pear orchards per year in Emilia-Romagna, Northern Italy. Steinernema carpocapsae and Steinernema feltiae activity was checked after spray applications of EPNs to the trunk and branches. In 2006, the treatment was applied either in spring or in autumn at different doses, before CM pupation; in 2007 the EPN treatment was applied only in autumn at 1.5 x 109 I.J. ha –1. Every year it was distributed by means of a conventional mist blower. The larval mortality was assessed directly on sentinel larvae in card boards on the trunks and indirectly on the eggs laid by the females of the first CM generation in spring. Moreover, each year, a trial was performed applying only S. carpocapsae on sentinel larvae with the aim of testing this nematode at suitable temperatures but at different water volumes. The CM sentinel larvae were effectively parasitized after autumnal EPN application. Moreover, the egg assessment demonstrated a good decrease in CM population in spring 2007, when EPNs had been applied at the best weather conditions (t° 12-14 °C and rain) in the previous autumn

Pre-test analysis of protected loss of primary pump transients in CIRCE-HERO facility

In the frame of LEADER project (Lead-cooled European Advanced Demonstration Reactor), a new configuration of the steam generator for ALFRED (Advanced Lead Fast Reactor European Demonstrator) was proposed. The new concept is a super-heated steam generator, double wall bayonet tube type with leakage monitoring [1]. In order to support the new steam generator concept, in the framework of Horizon 2020 SESAME project (thermal hydraulics Simulations and Experiments for the Safety Assessment of MEtal cooled reactors), the ENEA CIRCE pool facility will be refurbished to host the HERO (Heavy liquid mEtal pRessurized water cOoled tubes) test section to investigate a bundle of seven full scale bayonet tubes in ALFRED-like thermal hydraulics conditions. The aim of this work is to verify thermofluid dynamic performance of HERO during the transition from nominal to natural circulation condition. The simulations have been performed with RELAP5-3D© by using the validated geometrical model of the previous CIRCE-ICE test section [2], in which the preceding heat exchanger has been replaced by the new bayonet bundle model. Several calculations have been carried out to identify thermal hydraulics performance in different steady state conditions. The previous calculations represent the starting points of transient tests aimed at investigating the operation in natural circulation. The transient tests consist of the protected loss of primary pump, obtained by reducing feed-water mass flow to simulate the activation of DHR (Decay Heat Removal) system, and of the loss of DHR function in hot conditions, where feed-water mass flow rate is absent. According to simulations, in nominal conditions, HERO bayonet bundle offers excellent thermal hydraulic behavior and, moreover, it allows the operation in natural circulation

Post-test simulation of a PLOFA transient test in the CIRCE-HERO facility

CIRCE is a lead–bismuth eutectic alloy (LBE) pool facility aimed to simulate the primary system of a heavy liquid metal (HLM) cooled pool-type fast reactor. The experimental facility was implemented with a new test section, called HERO (Heavy liquid mEtal pRessurized water cOoled tubes), which consists of a steam generator composed of seven double-wall bayonet tubes (DWBT) with an active length of six meters. The experimental campaign aims to investigate HERO behavior, which is representative of the tubes that will compose ALFRED SG. In the framework of the Horizon 2020 SESAME project, a transient test was selected for the realization of a validation benchmark. The test consists of a protected loss of flow accident (PLOFA) simulating the shutdown of primary pumps, the reactor scram and the activation of the DHR system. A RELAP5-3D© nodalization scheme was developed in the pre-test phase at DIAEE of “Sapienza” University of Rome, providing useful information to the experimentalists. The model consisted to a mono-dimensional scheme of the primary flow path and the SG secondary side, and a multi-dimensional component simulating the large LBE pool. The analysis of experimental data, provided by ENEA, has suggested to improve the thermal–hydraulic model with a more detailed nodalization scheme of the secondary loop, looking to reproduce the asymmetries observed on the DWBTs operation. The paper summarizes the post-test activity performed in the frame of the H2020 SESAME project as a contribution of the benchmark activity, highlighting a global agreement between simulations and experiment for all the primary circuit physical quantities monitored. Then, the attention is focused on the secondary system operation, where uncertainties related to the boundary conditions affect the computational results

A General Mathematical Formulation for the Determination of Differential Leakage Factors in Electrical Machines with Symmetrical and Asymmetrical Full or Dead-Coil Multiphase Windings

This paper presents a simple and general mathematical formulation for the determination of the differential leakage factor for both symmetrical and asymmetrical full and dead-coil windings of electrical machines. The method can be applied to all multiphase windings and considers Görges polygons in conjunction with masses geometry in order to find an easy and affordable way to compute the differential leakage factor, avoiding the adoption of traditional methods that refer to the Ossanna's infinite series, which has to be obviously truncated under the bound of a predetermined accuracy. Moreover, the method described in this paper allows the easy determination of both the minimum and maximum values of the differential leakage factor, as well as its average value and the time trend. The proposed method, which does not require infinite series, is validated by means of several examples in order to practically demonstrate the effectiveness and the easiness of application of this procedure

Multi-mode bosonic Gaussian channels

A complete analysis of multi-mode bosonic Gaussian channels is proposed. We clarify the structure of unitary dilations of general Gaussian channels involving any number of bosonic modes and present a normal form. The maximum number of auxiliary modes that is needed is identified, including all rank deficient cases, and the specific role of additive classical noise is highlighted. By using this analysis, we derive a canonical matrix form of the noisy evolution of n-mode bosonic Gaussian channels and of their weak complementary counterparts, based on a recent generalization of the normal mode decomposition for non-symmetric or locality constrained situations. It allows us to simplify the weak-degradability classification. Moreover, we investigate the structure of some singular multi-mode channels, like the additive classical noise channel that can be used to decompose a noisy channel in terms of a less noisy one in order to find new sets of maps with zero quantum capacity. Finally, the two-mode case is analyzed in detail. By exploiting the composition rules of two-mode maps and the fact that anti-degradable channels cannot be used to transfer quantum information, we identify sets of two-mode bosonic channels with zero capacity.Comment: 37 pages, 3 figures (minor editing), accepted for publication in New Journal of Physic

Static friction on the fly: velocity depinning transitions of lubricants in motion

The dragging velocity of a model solid lubricant confined between sliding periodic substrates exhibits a phase transition between two regimes, respectively with quantized and with continuous lubricant center-of-mass velocity. The transition, occurring for increasing external driving force F_ext acting on the lubricant, displays a large hysteresis, and has the features of depinning transitions in static friction, only taking place on the fly. Although different in nature, this phenomenon appears isomorphic to a static Aubry depinning transition in a Frenkel-Kontorova model, the role of particles now taken by the moving kinks of the lubricant-substrate interface. We suggest a possible realization in 2D optical lattice experiments.Comment: 5 pages, 4 figures, revtex, in print in Phys. Rev. Let

Real-time reverse transcription polymerase chain reaction development for rapid detection of Tomato brown rugose fruit virus and comparison with other techniques

Background: Tomato brown rugose fruit virus (ToBRFV) is a highly infectious tobamovirus that causes severe disease in tomato (Solanum lycopersicum L.) crops. In Italy, the first ToBRFV outbreak occurred in 2018 in several provinces of the Sicily region. ToBRFV outbreak represents a serious threat for tomato crops in Italy and the Mediterranean Basin. Methods: Molecular and biological characterisation of the Sicilian ToBRFV ToB-SIC01/19 isolate was performed, and a sensitive and specific Real-time RT-PCR TaqMan minor groove binder probe method was developed to detect ToBRFV in infected plants and seeds. Moreover, four different sample preparation procedures (immunocapture, total RNA extraction, direct crude extract and leaf-disk crude extract) were evaluated. Results: The Sicilian isolate ToB-SIC01/19 (6,391 nt) showed a strong sequence identity with the isolates TBRFV-P12-3H and TBRFV-P12-3G from Germany, Tom1-Jo from Jordan and TBRFV-IL from Israel. The ToB-SIC01/19 isolate was successfully transmitted by mechanical inoculations in S. lycopersicum L. and Capsicum annuum L., but no transmission occurred in S. melongena L. The developed real-time RT-PCR, based on the use of a primer set designed on conserved sequences in the open reading frames3, enabled a reliable quantitative detection. This method allowed clear discrimination of ToBRFV from other viruses belonging to the genus Tobamovirus, minimising false-negative results. Using immunocapture and total RNA extraction procedures, the real-time RT-PCR and end-point RT-PCR gave the same comparable results. Using direct crude extracts and leaf-disk crude extracts, the end-point RT-PCR was unable to provide a reliable result. This developed highly specific and sensitive real-time RT-PCR assay will be a particularly valuable tool for early ToBRFV diagnosis, optimising procedures in terms of costs and time

Qubit channels with small correlations

We introduce a class of quantum channels with correlations acting on pairs of qubits, where the correlation takes the form of a shift operator onto a maximally entangled state. We optimise the output purity and show that below a certain threshold the optimum is achieved by partially entangled states whose degree of entanglement increases monotonically with the correlation parameter. Above this threshold, the optimum is achieved by the maximally entangled state characterizing the shift. Although, a full analysis can only be done for the 2-norm, both numerical and heuristic arguments indicate that this behavior and the optimal inputs are independent of p>1 when the optimal output purity is measured using the p-norm.Comment: 11 pages, 4 figures, 2 table

Solar Sail Simplified Optimal Control Law for Reaching High Heliocentric Distances

The aim of this paper is to analyze optimal trajectories of a solar sail-based spacecraft in missions towards the outer Solar System region. The paper proposes a simplified approach able to estimate the minimum flight time required to reach a given (sufficiently high) heliocentric distance. In particular, the effect of a set of solar photonic assists on the overall mission performance is analyzed with a simplified numerical approach. A comparison with results taken from the existing literature show the soundness of the proposed approach

Artificial Collinear Lagrangian Point Maintenance With Electric Solar Wind Sail

This article discusses the maintenance of an L-1-type artificial equilibrium point in the Sun-[Earth+Moon] circular restricted three-body problem by means of an electric solar wind sail. The reference configuration instability is compensated for with a feedback control law that adjusts the grid voltage as a function of the distance from the natural L-1 point. Two different control strategies are analyzed assuming the solar wind fluctuations to be modeled through a statistical approach