13,854 research outputs found
Selecting films for sex research: Gender differences in erotic film preference
The official published version can be obtained from the link below.The aim of this study was to explore gender differences in sexual responsiveness to erotic films that had been selected for their differential appeal for men and women. A secondary objective was to identify variables that influence sexual arousal and explore whether these variables differ for men and women. Fifteen men (M age = 26 yrs) and 17 women (M age = 24 yrs) were presented with 20 film clips depicting heterosexual interactions, half of which were female- and the other half male-selected, and were asked to rate the clips on a number of dimensions. Overall, men found the film clips more sexually arousing than did the women. Gender differences in arousal were negligible for female-selected clips but substantial for male-selected clips. Furthermore, men and women experienced higher levels of sexual arousal to clips selected for individuals of their own gender. Cluster regression analyses, explaining 77% of the variance for male and 65% for female participants, revealed that men's sexual arousal was dependent upon the attractiveness of the female actor, feeling interested, and both imagining oneself as a participant and watching as an observer. For women, with all variables entered, only imagining oneself as a participant contributed to sexual arousal ratings. The findings suggest that how films are selected in sex research is an important variable in predicting levels of sexual arousal reported by men and women
Photocell shadowing technique improves light source detector
Lightweight, compact modular system that includes an acquisition photocell is used as a light source tracking detector that exhibits minimum scale factor change with increased light source angle. Photocells of various types, responsive to other portions of the spectrum, could be used to acquire and track infrared, ultraviolet, and other source fluxes
Recognition of 3-D Objects from Multiple 2-D Views by a Self-Organizing Neural Architecture
The recognition of 3-D objects from sequences of their 2-D views is modeled by a neural architecture, called VIEWNET that uses View Information Encoded With NETworks. VIEWNET illustrates how several types of noise and varialbility in image data can be progressively removed while incornplcte image features are restored and invariant features are discovered using an appropriately designed cascade of processing stages. VIEWNET first processes 2-D views of 3-D objects using the CORT-X 2 filter, which discounts the illuminant, regularizes and completes figural boundaries, and removes noise from the images. Boundary regularization and cornpletion are achieved by the same mechanisms that suppress image noise. A log-polar transform is taken with respect to the centroid of the resulting figure and then re-centered to achieve 2-D scale and rotation invariance. The invariant images are coarse coded to further reduce noise, reduce foreshortening effects, and increase generalization. These compressed codes are input into a supervised learning system based on the fuzzy ARTMAP algorithm. Recognition categories of 2-D views are learned before evidence from sequences of 2-D view categories is accumulated to improve object recognition. Recognition is studied with noisy and clean images using slow and fast learning. VIEWNET is demonstrated on an MIT Lincoln Laboratory database of 2-D views of jet aircraft with and without additive noise. A recognition rate of 90% is achieved with one 2-D view category and of 98.5% correct with three 2-D view categories.National Science Foundation (IRI 90-24877); Office of Naval Research (N00014-91-J-1309, N00014-91-J-4100, N00014-92-J-0499); Air Force Office of Scientific Research (F9620-92-J-0499, 90-0083
Field host range of Apanteles opuntiarum (Hymenoptera: Braconidae) in Argentina, a potential biocontrol agent of Cactoblastis cactorum (Lepidoptera: Pyralidae) in North America
Field exploration in Argentina for cactophagous lepidopteran hosts parasitized by the recently described braconid parasitoid Apanteles opuntiarum Martínez & Berta (Hymenoptera: Braconidae) revealed a host range restricted to Cactoblastis cactorum (Berg) (Lepidoptera: Pyralidae) and C. doddi. Field collections of cactophagous larvae parasitized by the congeneric and sympatric parasitoid A. alexanderi included the host species C. bucyrus, Sigelgaita nr. chilensis, Tucumania sp., Tucumania tapiacola and Salambona sp. If a narrow host range for A.opuntiarum is confirmed in quarantine with North American cactus-feeding species, then this parasitoid could be released as a biological control agent for C. cactorum with little or no risk to non-target species.Las exploraciones de campo en Argentina de larvas hospedadoras cactófagas parasitadas por Apanteles opuntiarum Martínez & Berta (Hymenoptera: Braconidae), un bracónido recientemente descripto, revelaron un espectro de hospedadores restringido a Cactoblastis cactorum (Berg) (Lepidoptera: Pyralidae) y C. doddi. Las colecciones de campo de larvas cactófagas parasitadas por la especie congenérica y simpátrica A. alexanderi identificaron a C. bucyrus, Sigelgaita nr. chilensis, Tucumania sp., Tucumania tapiacola y Salambona sp. como especies hospedadoras. Si se confirma en cuarentena el estrecho rango de hospedadores de A. opuntiarum sobre especies norteamericanas que se alimentan de cactus, podría ser liberado como agente de control biológico de C. cactorum, con bajo riesgo o ninguno a especies no blanco.Fil: Varone, Laura. Fundación para el Estudio de Especies Invasivas; ArgentinaFil: Logarzo, Guillermo Alejandro. Fundación para el Estudio de Especies Invasivas; ArgentinaFil: Martinez, Juan Jose. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Museo Argentino de Ciencias Naturales ; ArgentinaFil: Navarro, Fernando. Universidad Nacional de Tucumán. Facultad de Ciencias Naturales e Instituto Miguel Lillo. Instituto Superior de Entomología; ArgentinaFil: Carpenter, James E.. United States Department of Agriculture; Estados UnidosFil: Hight, Stephen D.. United States Department of Agriculture; Estados Unido
Control of the cation occupancies of MnZn ferrite synthesized via reverse micelles
Variations in cation occupancy in mixed metal ferrite systems can affect their electronic and magnetic properties. It is known that different synthesis parameters can lead to various cation distributions and the ability to tune these distributions is of great interest. This study uses the extended x-ray-absorption fine structure–IR relationship to investigate the effect of various Fe2+/Fe3+ ratios in initial synthesis conditions on cation distribution for manganesezincferrite (MZFO). Differences in the precipitated material before firing could lead to differences in the final material if fired under similar conditions. This work uses several different ratios of Fe3+/Fe2+, which will affect the initial cell potential for the reaction, to synthesize nano MZFO. All samples were fired for 5h at 500°C under flowing nitrogen. Transmission electron microscopy micrographs reveal highly crystalline uniform nanoparticles of 16±2nm. The x-ray diffraction revealed single phase crystalline MZFO with an average crystallite size of around 14nm. The saturation magnetization ranged from 43to68emu∕g as measured by vibrating-sample magnetometry. The Fourier transform infrared (FTIR) analysis was used to determine the cation occupancies while changing the initial Fe3+/Fe2+ ratios from 10∕90 to90∕10. The FTIRspectra revealed a shift in the first absorption region in the far IR from 566.98to549.62cm−1 corresponding to the octahedral occupancies. This shift corresponds to a change in the percentage of octahedral sites occupied by manganese from roughly 25% to 12%. This change in manganese occupancy is also observed in the iron occupancies, which in turn help to explain the variation in saturation magnetization
Annealing temperature and initial iron valence ratio effects on the structural characteristics of nanoscale nickel zinc ferrite
Nickelzincferrite (NZFO) nanoparticles were synthesized via a reverse micelle method with a nonionic surfactant. Three different initial Fe3+/Fe2+ ratios were employed along with three different firing temperatures (200, 500, 1000 °C) to investigate the effects on the NZFO system. Extended x-rayabsorption fine structure (EXAFS) results reveal zinc loss at high annealing temperatures; at 1000 °C, the loss is nearly total for Fe3+/Fe2+ ratios other than 10:90. Annealing at 500 °C, however, appears necessary for fully incorporating the zinc and nickel into the spinel phase. The best nanoferrite was thus obtained using an initial Fe3+/Fe2+ ratio of 10:90 and a moderate firing temperature of 500 °C. This sample exhibits a room temperature saturation magnetization of 58 emu/g as measured via vibrating sample magnetometry, comparable with bulk values and greater than that of confirmed nano-NZFOs found in the literature. EXAFS also indicates that in all cases in which the elements adopted a spinel structure, the nickel occupies only octahedral sites and the zinc primarily tetrahedral sites
One parameter control of the size of iron oxide nanoparticles synthesized in reverse micelles
Iron oxide nanoparticles were synthesized via reverse micelle methods. The initial iron concentration was varied, while maintaining all other parameters constant, in order to investigate the effect of the iron concentration on the resultant iron oxide nanoparticle size. Increasing the iron concentration from 0.125M to 0.5M yielded an increase in average nanoparticle diameter from 4.71 to 7.95 nm, as measured by transmission electron microscopy. Three other concentrations between 0.125M and 0.5M showed corresponding size variations, all with statistical significance. Magnetic characterization by vibrating sample magnetometry and powder x-ray diffraction was performed to verify proper phase and material. Further insight into the reverse micelle method was acquired along with the ability to tune the nanoparticle size
Requirement of a 5′-Proximal Linear Sequence on Minus Strands for Plus-Strand Synthesis of a Satellite RNA Associated with Turnip Crinkle Virus
AbstractViral RNA replication begins with specific recognition of cis-acting RNA elements by the viral RNA-dependent RNA polymerase (RdRp) and/or associated host factors. A short RNA element (3′-AACCCCUGGGAGGC) located 41 bases from the 5′ end of minus strands of satellite RNA C (satC), a 356-base subviral RNA naturally associated with turnip crinkle virus (TCV), was previously identified as important for plus-strand synthesis using an in vitro RdRp assay (H. Guan, C. Song, A. E. Simon, 1997, RNA 3, 1401–1412). To examine the functional significance of this element in RNA replication, mutations were introduced into the consecutive C residues in the element. A single mutation of the 3′-most C residue resulted in undetectable levels of satC plus strands when transcripts were assayed in protoplasts and suppressed transcription directed by the element in vitro. However, satC minus strands were detectable at 6 h postinoculation (hpi) of protoplasts, accumulating to about 10% of wild-type levels at 24 hpi. This mutation, when in the plus-sense orientation, had little or no effect on minus-strand synthesis from full-length satC plus strands in vitro, suggesting that the 5′-proximal RNA element is required for satC plus-strand synthesis. In addition, in vivo genetic selection revealed a strict requirement for 10 of the 14 nucleotides of the element, indicating that the primary sequence is essential for RNA accumulation
Modified Seed Growth of Iron Oxide Nanoparticles in Benzyl Alcohol – Optimization for Heating and Broad Stability in Biomedical Applications
Iron oxide nanoparticles have received sustained interest for biomedical applications as synthetic approaches are continually developed for control of nanoparticle properties. However, many approaches focus solely on the material, rather than the complete optimization of synthesis and functionalization together to enhance translation into biological systems. Presented herein is a modified seed growth method designed for obtaining optimal nanoparticle properties and ease of surface functionalization for long term stability. With a one or two addition process, iron oxide nanoparticles were produced in crystallite sizes ranging from 5-15 nm using only benzyl alcohol and an iron precursor. In the functionalization process, concentration variations were required for stabilizing different nanoparticle sizes. Radio frequency induction heating experiments of various crystallite and hydrodynamic sizes verified that the heating efficiency greatly increased while approaching the 15 nm crystallite, and suggested an important role of the overall particle size on heating efficiency. Initial in vitro experiments with the functionalized nanoparticles showed success in providing hyperthermia-induced tumour cell killing without an increase in the temperature of the cell suspension medium. This demonstrates the potential for nanoparticle-based hyperthermia to provide a therapeutic effect while limiting normal tissue damage
- …