A study of the sonic-boom characteristics of a blunt body at a Mach number of 4.14

An experimental and theoretical study has shown that the applicability of far-field sonic-boom theory previously demonstrated for more slender shapes may now be extended to bodies with ratios of diameter to length as great as 2 and to Mach numbers at least as high as 4.14. This finding is of special significance in view of the limitations to the use of existing methods for the extrapolation of close-in experimental data

Numerical methods and a computer program for subsonic and supersonic aerodynamic design and analysis of wings with attainable thrust considerations

This paper describes methodology and an associated computer program for the design of wing lifting surfaces with attainable thrust taken into consideration. The approach is based on the determination of an optimum combination of a series of candidate surfaces rather than the more commonly used candidate loadings. Special leading-edge surfaces are selected to provide distributed leading-edge thrust forces which compensate for any failure to achieve the full theoretical leading-edge thrust, and a second series of general candidate surfaces is selected to minimize drag subject to constraints on the lift coefficient and, if desired, on the pitching moment coefficient. A primary purpose of the design approach is the introduction of attainable leading-edge thrust considerations so that relatively mild camber surfaces may be employed in the achievement of aerodynamic efficiencies comparable to those attainable if full theoretical leading-edge thrust could be achieved. The program provides an analysis as well as a design capability and is applicable to both subsonic and supersonic flow

Estimation of wing nonlinear aerodynamic characteristics at supersonic speeds

A computational system for estimation of nonlinear aerodynamic characteristics of wings at supersonic speeds was developed and was incorporated in a computer program. This corrected linearized theory method accounts for nonlinearities in the variation of basic pressure loadings with local surface slopes, predicts the degree of attainment of theoretical leading edge thrust, and provides an estimate of detached leading edge vortex loadings that result when the theoretical thrust forces are not fully realized

Numerical methods for the design and analysis of wings at supersonic speeds

Numerical methods for the design and analysis of arbitrary-planform wings at supersonic speeds are reviewed. Certain deficiencies are revealed, particularly in application to wings with slightly subsonic leading edges. Recently devised numerical techniques which overcome the major part of these deficiencies are presented. The original development as well as the more recent revisions are subjected to a thorough review

An aerodynamic analysis computer program and design notes for low speed wing flap systems

The expanded capabilities for analysis and design of low speed flap systems afforded by recent modifications of an existing computer program is described. The program provides for the simultaneous analysis of up to 25 pairs of leading-edge and trailing-edge flap deflection schedules. Among other new features of the program are a revised attainable thrust estimation method to provide more accurate predictions for low Mach numbers, and a choice of three options for estimation of leading-edge separation vortex flow effects. Comparison of program results with low speed experimental data for an arrow wing supersonic cruise configuration with leading-edge and trailing-edge flaps showed good agreement over most of the range of flap deflections. Other force data comparisons and an independent study of airfoil and wing pressure distributions indicated that wind-tunnel measurements of the aerodynamic performance of twisted and cambered wings and wings with leading-edge flaps can be very sensitive to Reynolds number effects

Sonic boom characteristics of proposed supersonic and hypersonic airplanes

Sonic boom characteristics of proposed supersonic and hypersonic aircraf

A linearized theory method of constrained optimization for supersonic cruise wing design

A linearized theory wing design and optimization procedure which allows physical realism and practical considerations to be imposed as constraints on the optimum (least drag due to lift) solution is discussed and examples of application are presented. In addition to the usual constraints on lift and pitching moment, constraints are imposed on wing surface ordinates and wing upper surface pressure levels and gradients. The design procedure also provides the capability of including directly in the optimization process the effects of other aircraft components such as a fuselage, canards, and nacelles