662 research outputs found

    Importance of size-selective particle measuring for assessing occupational exposures: a case study “from field to fork”

    Get PDF
    Sampling the total air concentration of particulate matter (PM) only provides a basic estimate of exposure that normally not allows correlating with the observed health effects. Therefore is of great importance to recognize the particles size distribution and, particularly, the exposure to fine particles (≤ 2.5 μm). This particles dimension corresponds to the respirable fraction, the one that can implicate local and systemic effects due to particle deposition and clearance from the lungs and transport within the organism. This study intended to describe occupational exposure to PM2.5 in three units related with swine production and consumption, namely: feed production, swine production and swine slaughterhouse. A size-selective particle measuring in five to six workplaces of each unit was performed. Measurements of PM were done using a portable direct-reading hand-held equipment (Lighthouse, model 3016 IAQ). Data showed slaughterhouse unit with higher values, with values ranging from 0.030 to 0.142 mg/m3 (0.073 + 0.043), being the cutting room the workplace with higher values. In feed production unit, values were between 0.026 and 0.033 mg/m3 (0.028 + 0.003) with the warehouse of pharmacy products as the workplace with higher values. Finally, in swine unit values ranged from 0.006 to 0.048 mg/m3 (0.023 + 0.017) with the batteries area presenting the higher values. PM can be rich in fungi and bacteria and their metabolites, such as endotoxins and mycotoxins. Previous publications already showed high contamination in these occupational settings and particles can have an important role in exposure since can easily act as carrier of these agents. Data acquired allow not only a better prediction of particle penetration into respiratory regions of the respiratory tract, but also a better estimation of PM health effects. Moreover, data permit to identify the workplaces where investment should be made to prevent and reduce exposure

    Electrostatic dust cloth: a useful passive sampling method when assessing exposure to fungi demonstrated in studies developed in Portugal (2018-2021)

    Get PDF
    Project “Occupational exposure of ambulance drivers to bioburden” (IPL/2020/BIO-AmbuDrivers_ESTeSL).FCT_UIDB/05608/2020. FCT_UIDP/05608/2020.Electrostatic dust cloths (EDC) have been widely used for microbiologic contamination assessment in different indoor and occupational environments. This paper reviews sixteen studies performed in Portugal between 2018 and 2021 for evaluating the exposure to microbiological agents and focusing on fungi using EDC as a passive sampling method. The findings suggest that EDC can be applied as a screening method for particulate matter-exposure assessment and as a complementary method to characterize microbial exposures in occupational environments. Overall, EDC should be included, side by side with other sampling methods, in sampling campaigns focused on exposure assessments due to the advantages such as the straightforward extraction protocol favoring the employment of different assays, which allows us to assess exposure to a wide range of microbial agents, and presents higher accuracy regarding the fungal diversity.info:eu-repo/semantics/publishedVersio

    Potential poultry and meat products contamination by aflatoxin B1 due to fungal presence in Portuguese poultry units

    Get PDF
    The impact of mycotoxins on human and animal health is well recognized. Aflatoxin B1 (AFB1) is by far the most prevalent and the most potent natural carcinogen and is usually the major aflatoxin produced by toxigenic fungal strains. Data available, points to an increasing frequency of poultry feed contamination by aflatoxins. Since aflatoxin residues may accumulate in body tissues, this represents a high risk to human health. Samples from commercial poultry birds have already presented detectable levels of aflatoxin in liver. A descriptive study was developed in order to assess fungal contamination by species from Aspergillus flavus complex in seven Portuguese poultry units. Air fungal contamination was studied by conventional and molecular methods. Air, litter and surfaces samples were collected. To apply molecular methods, air samples of 300L were collected using the Coriolis μ air sampler (Bertin Technologies), at 300 L/min airflow rate. For conventional methodologies, all the collected samples were incubated at 27ºC for five to seven days. Through conventional methods, Aspergillus flavus was the third fungal species (7%) most frequently found in 27 indoor air samples analysed and the most commonly isolated species (75%) in air samples containing only the Aspergillus genus..

    Exposure to microbial volatile organic compounds in a waste-handling unit

    Get PDF
    The production of MVOC by fungi has been taken into account especially from the viewpoint of indoor pollution with microorganisms but the relevance of fungal metabolites in working environments has not been sufficiently studied. The purpose of this study was to assess exposure to MVOCs in a waste-handling unit. It was used Multirae equipment (RAE Systems) to measured MVOCs concentration with a 10.6 eV lamps. The measurements were done near workers nose and during the normal activities. All measurements were done continuously and had the duration of 5 minutes at least. It was consider the higher value obtained in each measurement. In addition, for knowing fungi contamination, five air samples of 50 litres were collected through impaction method at 140 L/minute, at one meter tall, on to malt extract agar with the antibiotic chloramphenicol (MEA). MVOCs results range between 4.7 ppm and 8.9 ppm in the 6 locations consider. These results are eight times higher than normally obtained in indoor settings. Considering fungi results, two species were identified in air, being the genera Penicillium found in all the samples in uncountable colonies and Rhizopus only in one sample (40 UFC/m3). These fungi are known as MVOCs producers, namely terpenoids, ketones, alcohols and others. Until now, there has been no evidence that MVOCs are toxicologically relevant, but further epidemiological research is necessary to elucidate their role on human’s health, particularly in occupational settings where microbiological contamination is common. Additionally, further research should concentrate on quantitative analyses of specific MVOCs

    Cytotoxicity of contaminated protection devices used in waste sorting industry

    Get PDF
    Introduction - Waste sorting is one of the most critical working environments since waste is frequently contaminated by organic matter that functions as a nutrient substrate to microorganisms. In many occupational environments of the waste industry, workers are exposed during long periods to high concentrations of microbial contamination. Several studies have lately stressed health risks related to those environments. Microbial exposures are the leading inducers of several respiratory health symptoms, such as asthma, a decline in lung function, bronchial hyper-responsiveness, chronic bronchitis, wheeze, and cough. Due to the recognized increased risk of microbiologic agents’ exposure and the need of the employer to protect workers from the exposure risks, the use of Filtering Respiratory Protective Devices (FRPD) is mandatory in the Portuguese waste industry. Some hygienic measures taken by workers (such as where the FRPD is kept when not in use) or even the FRPD frequency replacement can impact the FRPD microbial contamination. Bioaerosols in the waste sorting industry consist of complex mixtures of organic and inorganic dust suspended in the air, including bacteria and endotoxins, fungi and mycotoxins, as well as particles of plant and animal origin. Aim of the study - To our knowledge, this is the FIRST study that will allow characterizing the risk resulting from the FRPD conditions of use and identifying the most suitable risk management measures.info:eu-repo/semantics/publishedVersio

    Ventilation influence in occupational exposure to fungi and volatile organic compounds: poultry case

    Get PDF
    Introduction - In poultry houses, large-scale production has led to increased bird densities within buildings. Such high densities of animals kept within confined spaces are a source of human health problems related to occupational organic dust exposure. This organic dust is composed of both non-viable particles and viable particulate matter (also called bioaerosols). Bioaerosols are comprised by airborne bacteria, fungi, viruses and their by-products, endotoxins and mycotoxins. Exposure to fungi in broiler houses may vary depending upon the applied ventilation system. Ventilation can be an important resource in order to reduce air contamination in these type of settings. Nevertheless, some concerns regarding costs, sensitivity of the animal species to temperature differences, and also the type of building used define which type of ventilation is used. Aim of the study - A descriptive study was developed in one poultry unit aiming to assess occupational fungal and volatile organic compounds (VOCs) exposure

    Possible aflatoxin presence in Portuguese poultry units

    Get PDF
    Introduction: Aflatoxins are known to be human carcinogens based on sufficient evidence of carcinogenicity in humans (hepatocellular carcinoma, or primary liver-cell cancer). Aflatoxin B1 is one of the most deeply studied mycotoxins, known for a long time as belonging to the group of toxins produced by the genus Aspergillus (A. flavus, A. parasiticus, A. nominus). The presence in food stuffs depends on their geographical origin and production methods. Occupational exposure to aflatoxins can occur by inhalation of dust generated during the handling and processing of contaminated crops and feeds. Therefore, farmers and other agricultural workers have one of the greatest risks of occupational exposure to these mycotoxins. Objective: To characterize A. flavus prevalence in seven poultry units, with emphasis to the possible presence of aflatoxin in the air. Methods: A descriptive study was developed to monitor air fungal contamination in seven poultry units. Nineteen interior air samples of 25 litres were collected through impaction method. Results: From the seven poultry units analyzed, A. flavus was found in three of them. From all fungal genus identified in the referred units, A. flavus was the third species most frequently found in air samples (7.23%). Moreover, in those units, and from the Aspergillus genus, A. flavus was the most frequently isolated species in air samples (74.5%). Conclusions: Regarding the observed results and considering the high number of units contaminated by fungi known as possible aflatoxin producers, we have to believe that exposition can occur by inhalation (workers) and ingestion (consumers). This situation might represent a public health problem considering that aflatoxin is a known cancer agent

    Professional exposure to fungal pathogens: an update to exposure conditions and exposure measurement

    Get PDF
    In many occupational settings an exposure to fungi occurs. Fungal exposure may occur for instance in the form of dermatocytes, yeasts or mold. Associated to the fungi themselves an exposure to cell wall components like ß(1 ? 3)-D-glucans, to mycotoxins or to microbial volatile compounds can occur. Health hazards may differ across species because fungi may produce different allergens and mycotoxins, and some species can infect humans. Occupational settings are often characterized by special exposure conditions with respect to duration, frequency and especially to the level of exposure resulting at least sometimes to high or very high fungal exposure. Because of these special conditions occupational settings are suitable for epidemiologic studies. However, the knowledge about occupational exposure to fungi and associated compounds like mycotoxins is still fragmentary and not well disseminated. An indication for a high fungal exposure is for instance the handling of dry natural products like grain, hay or herbal plants with a high specific surface and the tendency to release dust during handling. The fungal components often form the determinative part of such dusts and might be a vehicle to respiratory airways. The authors will present results of exposure measurements of occupational settings and exposure conditions which are only rarely investigated

    Importance of size-selective particle sampling for assessing occupational exposures: results from three different occupational settings

    Get PDF
    Sampling the total air concentration of particulate matter (PM) only provides a basic estimate of exposure that normally not allows correlating with the observed health effects. Therefore is of extreme importance to know the particles size distribution and, in more detail, the exposure to fine particles (≤ 2.5 µm). This particles dimension corresponds to the respirable fraction. This particle fraction can result, besides local effects, in systemic effects due to particle deposition and clearance from the lungs and transport within the organism. This study intended to describe occupational exposure to PM2.5 in three different units located near Lisbon and related with occupational exposure to organic dust, namely: swine and poultry feed production and waste management
    corecore