La Traza Oculta de la Plaza de Toros de la Real Maestranza de Caballería de Sevilla. Sobre la Geometría de su Planta

Perhaps one of the most showy characteristics of the Bullring of the Real Maestranza de Caballeria of Seville is the singularity of its geometric layout, the irregularity of its arena. An unusual form to which no convincing justification has been found. There are no documents that explain it in the archives of the Corporation and there is no doubt about the solvency and dexterity of the major teachers, military engineers and architects who built it over a hundred and twenty years. Now, we think we have found an explanation for this irregular geometry. A reasoning based on the history of it construction, also in the observation of the historical and new planimetry, and especially in the knowledge that has provided us with the building of the works of reform and conservation carried out In it during these last years.Quizás una de las características más llamativas de la Plaza de la Real Maestranza de Caballería de Sevilla sea la singularidad de su traza, la irregularidad de su ruedo. Una forma insólita a la que no se ha encontrado justificación convincente. No existen documentos que la expliquen en los archivos de la Corporación y tampoco puede dudarse de la solvencia y destreza de los maestros mayores, ingenieros militares y arquitectos que a lo largo de ciento veinte años la levantaron. Ahora, creemos haber encontrado una explicación a esa geometría irregular. Un razonamiento basado en la historia de su construcción, también en la observación tanto de la planimetría histórica conservada como de los nuevos levantamientos, y sobre todo en el conocimiento que nos han proporcionado del edificio las obras de reforma y conservación llevadas a cabo en ella durante estos últimos años

Emerging planetary nebulae within 3D spiral patterns

We present the first 3D radiation-hydrodynamic simulations of the formation of planetary nebulae (PNe) emerging from 3D spiral patterns. We use the GUACHO code to create 3D spiral structures as a consequence of the distortions on the geometry of the intrinsically isotropic wind of an asymptotic giant branch (AGB) star produced by a companion star in a circular orbit. We found that the orbital period of the binary producing the 3D spiral pattern has consequences on the formation and shaping of the PN itself. Stellar systems with longer period create less entwined 3D spirals, producing PNe with rounder inner cavities, and prevent the expansion of jet towards the polar directions. The spiral fitting procedure used in the literature to predict the binary's orbital period may be misleading in the case of proto-PNe and PNe as spiral patterns are diluted by their own thermal expansion down to the average AGB density profile within a few hundred years and are further disrupted by the action of jets. By adopting a phase of jet ejections between the AGB and post-AGB stages, we are able to recover the morphologies of proto-PNe and PNe that exhibit ring-like structures in their halos.Comment: 12 pages, 12 figures, 1 table; Accepted to MNRA

Structure of Polyelectrolytes in Poor Solvent

We present simulations on charged polymers in poor solvent. First we investigate in detail the dilute concentration range with and without imposed extension constraints. The resulting necklace polymer conformations are analyzed in detail. We find strong fluctuations in the number of pearls and their sizes leading only to small signatures in the form factor and the force-extension relation. The scaling of the peak in the structure factor with the monomer density shows a pertinent different behavior from good solvent chains.Comment: 7 pages, 5 figures. submitted to EP

Bioprinting as a food production technique: Conceptual and ethical aspects, advantages and disadvantages, and applications

3D bioprinters present techniques that have various applications in the food industry. For this reason, this work aims to compile and review various research works focused on the utilities and advantages of this type of machinery. Where we first mention the basis of these bioprinting techniques and then proceed to highlight the bioethical issues that surround their application in the food industry, analyze the current advantages and disadvantages, the user that has been given in the production of food for astronauts, and also mention some of the research that has been taking place in Latin America and the world. The greatest advantage of 3D bioprinting of food is the speed of production compared to traditional manufacturing methods, allowing one to obtain food with various geometric shapes; it allows control of the nutritional value, and the texture of the product, reduces environmental pollution and has the advantage of being able to take advantage of the greater performance of the materials required for production. Additionally, this technology is considered an alternative production technique that will be used to solve the problem of feeding in places of scarce resources such as space and areas not suitable for animal husbandry

Like-charge attraction through hydrodynamic interaction

We demonstrate that the attractive interaction measured between like-charged colloidal spheres near a wall can be accounted for by a nonequilibrium hydrodynamic effect. We present both analytical results and Brownian dynamics simulations which quantitatively capture the one-wall experiments of Larsen and Grier (Nature 385, p. 230, 1997).Comment: 10 pages, 4 figure

Anomalous interactions in confined charge-stabilized colloid

Charge-stabilized colloidal spheres dispersed in weak 1:1 electrolytes are supposed to repel each other. Consequently, experimental evidence for anomalous long-ranged like-charged attractions induced by geometric confinement inspired a burst of activity. This has largely subsided because of nagging doubts regarding the experiments' reliability and interpretation. We describe a new class of thermodynamically self-consistent colloidal interaction measurements that confirm the appearance of pairwise attractions among colloidal spheres confined by one or two bounding walls. In addition to supporting previous claims for this as-yet unexplained effect, these measurements also cast new light on its mechanism.Comment: 8 pages, 5 figures, RevTeX4. Conference proceedings for CODEF-04, Colloidal Dispersions in External Fields, March 29 - April 1, 200

Propagation of Rayleighs waves in cracked media

Este trabajo está enfocado a la obtención de resultados numéricos que permitan la detección y caracterización de grietas sub-superficiales en sólidos mediante la incidencia de ondas elásticas de Rayleigh. Los resultados se obtienen a partir de ecuaciones integrales de frontera, que pertenecen al campo de la elastodinámica. Una vez que se aplican las condiciones de frontera se obtiene un sistema de ecuaciones integrales del tipo Fredholm de segunda especie y orden cero, el cual es resuelto mediante eliminación gaussiana. El método que se emplea para la discretización de dichas ecuaciones es conocido como «método indirecto de elementos frontera», el cual puede ser visto como una derivación del teorema clásico de Somigliana. A partir de los análisis realizados en el dominio de la frecuencia emergen picos de resonancia que permiten inferir la presencia de grietas mediante los cocientes espectrales. Se analizaron varios modelos de medios agrietados donde se pretende evidenciar la gran utilidad que presenta el uso de los cocientes espectrales para identificar grietas. Se estudiaron los efectos de la orientación y la localización de las grietas. Los resultados obtenidos presentan buena concordancia con los publicados previamente.This work is focused on the finding of numerical results for detection and characterization of sub-surface cracks in solids under the incidence of Rayleighs elastic waves. The results are obtained from boundary integral equations, which belong to the field of dynamics of elasticity. Once applied the boundary conditions, a system of Fredholms integral equations of second kind and zero order is obtained, which is solved using Gaussian elimination. The method that is used for the solution of such integral equations is known as the Indirect Boundary Element Method, which can be seen as a derivation of the Somiglianas classic theorem. On the basis of the analysis made in the frequency domain, resonance peaks emerge and allow us to infer the presence of cracks through the spectral ratios. Several models of cracked media were analyzed, where analyses reveal the great utility that displays the use of spectral ratios to identify cracks. We studied the effects of orientation and location of cracks. The results show good agreement with the previously published.Peer Reviewe

A Police Officer’s Tacit Knowledge Inventory (POTKI): Establishing Construct Validity and Exploring Applications

Research summarizes the construction of a Police Officer’s Tacit Knowledge Inventory (Inventory), a situational judgment test comprised of knowledge gained on-the-job by experienced police officers, and examines if it can play a role in the development of expertise. Correlation and regression analysis was done to establish the Inventory’s ability to predict post-Academy graduation performance. Results show that Inventory response patterns correlate with Supervisor ratings; and the Inventory responses correctly predict significant differences between novice patrol officers and experienced police officers