Influence of Epoxidized Cardanol Functionality and Reactivity on Network Formation and Properties.

Cardanol is a renewable resource based on cashew nut shell liquid (CNSL), which consists of a phenol ring with a C15 long aliphatic side chain in the meta position with varying degrees of unsaturation. Cardanol glycidyl ether was chemically modified to form side-chain epoxidized cardanol glycidyl ether (SCECGE) with an average epoxy functionality of 2.45 per molecule and was cured with petroleum-based epoxy hardeners, 4-4\u27-methylenebis(cyclohexanamine) and diethylenetriamine, and a cardanol-based amine hardener. For comparison, cardanol-based diphenol diepoxy resin, NC514 (Cardolite), and a petroleum-based epoxy resin, diglycidyl ether of bisphenol-A (DGEBA) were also evaluated. Chemical and thermomechanical analyses showed that for SCECGE resins, incomplete cure of the secondary epoxides led to reduced cross-link density, reduced thermal stability, and reduced elongation at break when compared with difunctional resins containing only primary epoxides. However, because of functionality greater than two, amine-cured SCECGE produced

Epoxidation of Cardanol\u27s Terminal Double Bond.

In this investigation, the terminal double bonds of the side chain epoxidized cardanol glycidyl ether (SCECGE) molecule were further epoxidized in the presence of Oxone® (potassium peroxomonosulfate) and fluorinated acetone. Regular methods for the double bond epoxidation are not effective on the terminal double bonds because of their reduced electronegativity with respect to internal double bonds. The terminal double bond functionality of the SCECGE was epoxidized to nearly 70%, increasing the epoxy functionality of SCECGE from 2.45 to 2.65 epoxies/molecule as measured using proton magnetic nuclear resonance (1H-NMR). This modified material—side chain epoxidized cardanol glycidyl ether with terminal epoxies (TE-SCECGE)—was thermally cured with cycloaliphatic curing agent 4-4′-methylenebis(cyclohexanamine) (PACM) at stoichiometry, and the cured polymer properties, such as glass transition temperature (Tg) and tensile modulus, were compared with SCECGE resin cured with PACM. The Tg of the material was increased from 52 to 69 °C as obtained via a dynamic mechanical analysis (DMA) while the tensile modulus of the material increased from 0.88 to 1.24 GPa as a result of terminal double bond epoxidation. In addition to highlighting the effects of dangling side groups in an epoxy network, this modest increase in Tg and modulus could be sufficient to significantly expand the potential uses of amine-cured cardanol-based epoxies for fiber reinforced composite applications

Polybutylene Succinate (PBS) - Polycaprolactone (PCL) Blends Compatibilized with Poly(ethylene oxide)-block-poly( propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) Copolymer for Biomaterial Applications

This study reports the preparation and characterization of Polybutylene Succinate (PBS)-Polycaprolactone (PCL) melt blends (10-40 wt.% PCL) in the presence of a compatibilizer, in order to explore their potential use as a biomaterial. The thermal transitions, as well as the crystallinity of the polymer blends were analyzed by Differential Scanning Calorimetry, the thermomechanical properties were analyzed via Dynamic Mechanical Analysis and phase morphologies were characterized by Scanning Electron Microscopy. Degradation profiles of the blends were analyzed in PBS buffer solution at pH 7.4 at 37 degrees C via pH measurements. Cytotoxicity of the PBS/PCL films were tested by MTS assay

Polybutylene Succinate (PBS) – Polycaprolactone (PCL) Blends Compatibilized with Poly(ethylene oxide)- block

This study reports the preparation and characterization of Polybutylene Succinate (PBS)-Polycaprolactone (PCL) melt blends (10-40 wt.% PCL) in the presence of a compatibilizer, in order to explore their potential use as a biomaterial. The thermal transitions, as well as the crystallinity of the polymer blends were analyzed by Differential Scanning Calorimetry, the thermomechanical properties were analyzed via Dynamic Mechanical Analysis and phase morphologies were characterized by Scanning Electron Microscopy. Degradation profiles of the blends were analyzed in PBS buffer solution at pH 7.4 at 37 degrees C via pH measurements. Cytotoxicity of the PBS/PCL films were tested by MTS assay