539 research outputs found

    InforMing the PAthway of COPD Treatment (IMPACT) trial: fibrinogen levels predict risk of moderate or severe exacerbations

    Get PDF
    Background: Fibrinogen is the first qualified prognostic/predictive biomarker for exacerbations in patients with chronic obstructive pulmonary disease (COPD). The IMPACT trial investigated fluticasone furoate/umeclidinium/vilanterol (FF/UMEC/VI) triple therapy versus FF/VI and UMEC/VI in patients with symptomatic COPD at risk of exacerbations. This analysis used IMPACT trial data to examine the relationship between fibrinogen levels and exacerbation outcomes in patients with COPD. Methods: 8094 patients with a fibrinogen assessment at Week 16 were included, baseline fibrinogen data were not measured. Post hoc analyses were performed by fibrinogen quartiles and by 3.5 g/L threshold. Endpoints included on-treatment exacerbations and adverse events of special interest (AESIs). Results: Rates of moderate, moderate/severe, and severe exacerbations were higher in the highest versus lowest fibrinogen quartile (0.75, 0.92 and 0.15 vs 0.67, 0.79 and 0.10, respectively). The rate ratios (95% confidence interval [CI]) for exacerbations in patients with fibrinogen levels ≥ 3.5 g/L versus those with fibrinogen levels < 3.5 g/L were 1.03 (0.95, 1.11) for moderate exacerbations, 1.08 (1.00, 1.15) for moderate/severe exacerbations, and 1.30 (1.10, 1.54) for severe exacerbations. There was an increased risk of moderate/severe exacerbation (hazard ratio [95% CI]: highest vs lowest quartile 1.16 [1.04, 1.228]; ≥ 3.5 g/L vs < 3.5 g/L: 1.09 [1.00, 1.16]) and severe exacerbation (1.35 [1.09, 1.69]; 1.27 [1.08, 1.47], respectively) with increasing fibrinogen level. Cardiovascular AESIs were highest in patients in the highest fibrinogen quartile. Conclusions: Rate and risk of exacerbations was higher in patients with higher fibrinogen levels. This supports the validity of fibrinogen as a predictive biomarker for COPD exacerbations, and highlights the potential use of fibrinogen as an enrichment strategy in trials examining exacerbation outcomes. Trial registration: NCT0216451

    Observation of a ppb mass threshoud enhancement in \psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p}) decay

    Full text link
    The decay channel ψπ+πJ/ψ(J/ψγppˉ)\psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p}) is studied using a sample of 1.06×1081.06\times 10^8 ψ\psi^\prime events collected by the BESIII experiment at BEPCII. A strong enhancement at threshold is observed in the ppˉp\bar{p} invariant mass spectrum. The enhancement can be fit with an SS-wave Breit-Wigner resonance function with a resulting peak mass of M=186113+6(stat)26+7(syst)MeV/c2M=1861^{+6}_{-13} {\rm (stat)}^{+7}_{-26} {\rm (syst)} {\rm MeV/}c^2 and a narrow width that is Γ<38MeV/c2\Gamma<38 {\rm MeV/}c^2 at the 90% confidence level. These results are consistent with published BESII results. These mass and width values do not match with those of any known meson resonance.Comment: 5 pages, 3 figures, submitted to Chinese Physics

    Erratum to: Synthesis and Magnetic Properties of Nearly Monodisperse CoFe2O4 Nanoparticles Through a Simple Hydrothermal Condition

    Get PDF
    <p>Abstract</p> <p>Nearly monodisperse cobalt ferrite (CoFe<sub>2</sub>O<sub>4</sub>) nanoparticles without any size-selection process have been prepared through an alluring method in an oleylamine/ethanol/water system. Well-defined nanospheres with an average size of 5.5 nm have been synthesized using metal chloride as the law materials and oleic amine as the capping agent, through a general liquid&#8211;solid-solution (LSS) process. Magnetic measurement indicates that the particles exhibit a very high coercivity at 10 K and perform superparamagnetism at room temperature which is further illuminated by ZFC/FC curves. These superparamagnetic cobalt ferrite nanomaterials are considered to have potential application in the fields of biomedicine. The synthesis method is possible to be a general approach for the preparation of other pure binary and ternary compounds.</p

    PF-4var/CXCL4L1 Predicts Outcome in Stable Coronary Artery Disease Patients with Preserved Left Ventricular Function

    Get PDF
    Background: Platelet-derived chemokines are implicated in several aspects of vascular biology. However, for the chemokine platelet factor 4 variant (PF-4var/CXCL4L1), released by platelets during thrombosis and with different properties as compared to PF-4/CXCL4, its role in heart disease is not yet studied. We evaluated the determinants and prognostic value of the platelet-derived chemokines PF-4var, PF-4 and RANTES/CCL5 in patients with stable coronary artery disease (CAD). Methodology/Principal Findings: From 205 consecutive patients with stable CAD and preserved left ventricular (LV) function, blood samples were taken at inclusion and were analyzed for PF-4var, RANTES, platelet factor-4 and N-terminal pro-B-type natriuretic peptide (NT-proBNP). Patients were followed (median follow-up 2.5 years) for the combined endpoint of cardiac death, non-fatal acute myocardial infarction, stroke or hospitalization for heart failure. Independent determinants of PF-4var levels (median 10 ng/ml; interquartile range 8-16 ng/ml) were age, gender and circulating platelet number. Patients who experienced cardiac events (n = 20) during follow-up showed lower levels of PF-4var (8.5 [5.3-10] ng/ml versus 12 [8-16] ng/ml, p = 0.033). ROC analysis for events showed an area under the curve (AUC) of 0.82 (95% CI 0.73-0.90, p<0.001) for higher NT-proBNP levels and an AUC of 0.32 (95% CI 0.19-0.45, p = 0.009) for lower PF-4var levels. Cox proportional hazard analysis showed that PF-4var has an independent prognostic value on top of NT-proBNP. Conclusions: We conclude that low PF-4var/CXCL4L1 levels are associated with a poor outcome in patients with stable CAD and preserved LV function. This prognostic value is independent of NT-proBNP levels, suggesting that both neurohormonal and platelet-related factors determine outcome in these patients

    Vacancy and Doping States in Monolayer and bulk Black Phosphorus.

    Get PDF
    The atomic geometries and transition levels of point defects and substitutional dopants in few-layer and bulk black phosphorus are calculated. The vacancy is found to reconstruct in monolayer P to leave a single dangling bond, giving a negative U defect with a +/- transition level at 0.24 eV above the valence band edge. The V(-) state forms an unusual 4-fold coordinated site. In few-layer and bulk black P, the defect becomes a positive U site. The divacancy is much more stable than the monovacancy, and it reconstructs to give no deep gap states. Substitutional dopants such as C, Si, O or S do not give rise to shallow donor or acceptor states but instead reconstruct to form non-doping sites analogous to DX or AX centers in GaAs. Impurities on black P adopt the 8-N rule of bonding, as in amorphous semiconductors, rather than simple substitutional geometries seen in tetrahedral semiconductors

    Heusler type CoNiGa alloys with high martensitic transformation temperature

    Get PDF
    A strong need exists to develop new kinds of high-temperature shape-memory alloys. In this study, two series of CoNiGa alloys with different compositions have been studied to investigate their potentials as high-temperature shape-memory alloys, with regard to their microstructure, crystal structure, and martensitic transformation behavior. Optical observations and X-ray diffractions confirmed that single martensite phase was present for low cobalt samples, and dual phases containing martensite and gamma phase were present for high cobalt samples. It was also found that CoNiGa alloys in this study exhibit austenitic transformation temperatures higher than 340 degrees C, showing their great potentials for developing as high-temperature shape-memory alloys

    Dynamics of mechanical waves in periodic grapheme nanoribbon assemblies

    Get PDF
    We simulate the natural frequencies and the acoustic wave propagation characteristics of graphene nanoribbons (GNRs) of the type (8,0) and (0,8) using an equivalent atomistic-continuum FE model previously developed by some of the authors, where the C-C bonds thickness and average equilibrium lengths during the dynamic loading are identified through the minimisation of the system Hamiltonian. A molecular mechanics model based on the UFF potential is used to benchmark the hybrid FE models developed. The acoustic wave dispersion characteristics of the GNRs are simulated using a Floquet-based wave technique used to predict the pass-stop bands of periodic mechanical structures. We show that the thickness and equilibrium lengths do depend on the specific vibration and dispersion mode considered, and that they are in general different from the classical constant values used in open literature (0.34 nm for thickness and 0.142 nm for equilibrium length). We also show the dependence of the wave dispersion characteristics versus the aspect ratio and edge configurations of the nanoribbons, with widening band-gaps that depend on the chirality of the configurations. The thickness, average equilibrium length and edge type have to be taken into account when nanoribbons are used to design nano-oscillators and novel types of mass sensors based on periodic arrangements of nanostructures
    corecore