QUANTITATIVE REAL-TIME PCR (Q-PCR) FOR SPUTUM SMEAR DIAGNOSIS OF PULMONARY TUBERCULOSIS AMONG PEOPLE WITH HIV/AIDS

Objective: To assess quantitative real-time polymerase chain reaction (q-PCR) for the sputum smear diagnosis of pulmonary tuberculosis (PTB) in patients living with HIV/AIDS with a clinical suspicion of PTB. Method: This is a prospective study to assess the accuracy of a diagnostic test, conducted on 140 sputum specimens from 140 patients living with HIV/AIDS with a clinical suspicion of PTB, attended at two referral hospitals for people living with HIV/AIDS in the city of Recife, Pernambuco, Brazil. A Löwenstein-Jensen medium culture and 7H9 broth were used as gold standard. Results: Of the 140 sputum samples, 47 (33.6%) were positive with the gold standard. q-PCR was positive in 42 (30%) of the 140 patients. Only one (0.71%) did not correspond to the culture. The sensitivity, specificity and accuracy of the q-PCR were 87.2%, 98.9% and 95% respectively. In 39 (93%) of the 42 q-PCR positive cases, the CT (threshold cycle) was equal to or less than 37. Conclusion: q-PCR performed on sputum smears from patients living with HIV/AIDS demonstrated satisfactory sensitivity, specificity and accuracy, and may therefore be recommended as a method for diagnosing PTB

Evaluation of fluoride release from experimental TiF4 and NaF varnishes in vitro

Fluoride varnishes play an important role in the prevention of dental caries, promoting the inhibition of demineralization and the increase of remineralization. OBJECTIVE: This study aimed to analyze the amount of fluoride released into water and artificial saliva from experimental TiF(4 )and NaF varnishes, with different concentrations, for 12 h. MATERIAL AND METHODS: Fluoride varnishes were applied on acrylic blocks and then immersed in 10 ml of deionized water and artificial saliva in polystyrene bottles. The acrylic blocks were divided in seven groups (n=10): 1.55% TiF(4 )varnish (0.95% F, pH 1.0); 3.10% TiF(4 )varnish (1.90% F, pH 1.0); 3.10% and 4% TiF(4 )varnish (2.45% F, pH 1.0); 2.10% NaF varnish (0.95% F, pH 5.0); 4.20% NaF varnish (1.90% F, pH 5.0); 5.42% NaF varnish (2.45% F, pH 5.0) and control (no treatment, n=5). The fluoride release was analyzed after 1/2, 1, 3, 6, 9 and 12 h of exposure. The analysis was performed using an ion-specific electrode coupled to a potentiometer. Two-way ANOVA and Bonferroni's test were applied for the statistical analysis (p<0.05). RESULTS: TiF(4 )varnishes released larger amounts of fluoride than NaF varnishes during the first 1/2 h, regardless of their concentration; 4% TiF(4) varnish released more fluoride than NaF varnishes for the first 6 h. The peak of fluoride release occurred at 3 h. There was a better dose-response relationship among the varnishes exposed to water than to artificial saliva. CONCLUSIONS: The 3.10% and 4% TiF(4 )-based varnishes have greater ability to release fluoride into water and artificial saliva compared to NaF varnish; however, more studies must be conducted to elucidate the mechanism of action of TiF(4 )varnish on tooth surface

TiF4 and NaF varnishes as anti-erosive agents on enamel and dentin erosion progression in vitro

Objective This study assessed the effect of fluoride varnishes on the progression of tooth erosion in vitro. Material and Methods: Forty-eight enamel and 60 root dentin samples were previously demineralized (0.1% citric acid, pH 2.5, 30 min), leading to a baseline and erosive wear of 12.9 and 11.4 µm, respectively. The samples were randomly treated (6 h) with a 4% TiF4 varnish (2.45%F-, pH 1.0), a 5.42% NaF varnish (2.45%F-, pH 5.0), a placebo varnish and no varnish (control). The samples were then subjected to erosive pH cycles (4x90 s/day in 0.1% citric acid, intercalated with artificial saliva) for 5 days. The increment of the erosive tooth wear was calculated. In the case of dentin, this final measurement was done with and without the demineralized organic matrix (DOM). Enamel and dentin data were analyzed using ANOVA/Tukey’s and Kruskal-Wallis/Dunn tests, respectively (p<0.05). Results The TiF4 (mean±s.d: 1.5±1.1 µm) and NaF (2.1±1.7 µm) varnishes significantly reduced enamel wear progression compared to the placebo varnish (3.9±1.1 µm) and control (4.5±0.9 µm). The same differences were found for dentin in the presence and absence of the DOM, respectively: TiF4 (average: 0.97/1.87 µm), NaF (1.03/2.13 µm), placebo varnish (3.53/4.47 µm) and control (3.53/4.36 µm). Conclusion The TiF4 and NaF varnishes were equally effective in reducing the progression of tooth erosion in vitro

Thickness and nanomechanical properties of protective layer formed by TiF4 varnish on enamel after erosion

Abstract The layer formed by fluoride compounds on tooth surface is important to protect the underlying enamel from erosion. However, there is no investigation into the properties of protective layer formed by NaF and TiF4 varnishes on eroded enamel. This study aimed to evaluate the thickness, topography, nanohardness, and elastic modulus of the protective layer formed by NaF and TiF4 varnishes on enamel after erosion using nanoindentation and atomic force microscopy (AFM). Human enamel specimens were sorted into control, NaF, and TiF4 varnish groups (n = 10). The initial nanohardness and elastic modulus values were obtained and varnishes were applied to the enamel and submitted to erosive challenge (10 cycles: 5 s cola drink/5 s artificial saliva). Thereafter, nanohardness and elastic modulus were measured. Both topography and thickness were evaluated by AFM. The data were subjected to ANOVA, Tukey’s test and Student’s t test (α = 0.05). After erosion, TiF4 showed a thicker protective layer compared to the NaF group and nanohardness and elastic modulus values were significantly lower than those of the control group. It was not possible to measure nanohardness and elastic modulus in the NaF group due to the thin protective layer formed. AFM showed globular deposits, which completely covered the eroded surface in the TiF4 group. After erosive challenge, the protective layer formed by TiF4 varnish showed significant properties and it was thicker than the layer formed by NaF varnish

The association between stress and mood across the adult lifespan on default mode network

Aging of brain structure and function is a complex process characterized by high inter- and intra-individual variability. Such variability may arise from the interaction of multiple factors, including exposure to stressful experience and mood variation, across the lifespan. Using a multimodal neuroimaging and neurocognitive approach, we investigated the association of stress, mood and their interaction, in the structure and function of the default mode network (DMN), both during rest and task-induced deactivation, throughout the adult lifespan. Data confirmed a decreased functional connectivity (FC) and task-induced deactivation of the DMN during the aging process and in subjects with lower mood; on the contrary, an increased FC was observed in subjects with higher perceived stress. Surprisingly, the association of aging with DMN was altered by stress and mood in specific regions. An increased difficulty to deactivate the DMN was noted in older participants with lower mood, contrasting with an increased deactivation in individuals presenting high stress, independently of their mood levels, with aging. Interestingly, this constant interaction across aging was globally most significant in the combination of high stress levels with a more depressed mood state, both during resting state and task-induced deactivations. The present results contribute to characterize the spectrum of FC and deactivation patterns of the DMN, highlighting the crucial association of stress and mood levels, during the adult aging process. These combinatorial approaches may help to understand the heterogeneity of the aging process in brain structure and function and several states that may lead to neuropsychiatric disorders.The work was supported by SwitchBox-FP7-HEALTH-2010-Grant 259772-2 and by ON.2, O NOVO NORTE, North Portugal Regional Operational Programme 2007/2013, of the National strategic Reference Framework (NSRF) 2007/2013, through the European Regional Development Fund (ERDF)info:eu-repo/semantics/publishedVersio