156 research outputs found
Visual evaluation of sliced Italian salami by image analysis.
Visual inspection is an important part of quality control not only for manufacturers but also for retailers and consumers.
The object of this investigation was to determine fat content in sliced salami by means of image analysis. The image analysis procedure is applied to digital images of sliced Italian salami produced in 16 different salami factories (A – P). The image analysis method described in this work is non-destructive and the necessary equipment is cheap. It extracts directly interpretable parameters of fat particle morphology (e.g. area, roundness) and number of fat particles from 15 digital images for each sample (A – P). The correlations between the fat features extracted from the images with the chemical fat content measured on the samples were also studied. Good relationships were found between the fat particle characteristics measured by image analysis procedure and the percentage of chemically extractable fat by correlation (R2 = 0.75) and PCA analysis
Improving physical properties of sodium caseinate based coating with the optimal formulation: effect on strawberries respiration and transpiration rates.
The objective of the work was to improve the physical properties of caseinate (SC)-based coating by using a thickening agent, guar gum (GG), and a solid fat phase, beeswax (BW). To this aim, the effect of GG, BW, and surfactant concentration, varying the hydrophilic-lipophilic balance (HLB) values given by surfactant combination, on the physicochemical properties of the caseinate-based blends and film has been investigated. The best formulation has been applied to strawberries to quantify the impact of the coating on respiration and transpiration rates. The results showed that GG, BW, their interaction, and HLB affected the physical properties of the sodium caseinate-based coating. The formulations most physically stable and containing small and uniform solid BW particles were those with an HLB of 9.2. GG affected the viscosity of the blends, whereas the effect of beeswax concentration on viscosity was very low. A 50% of reduction of water vapor permeability was obtained by changing GG and BW concentration. The best formulation, containing 8% SC, 0.2% GG, 2% BW, and Tween 80 and Span 80 at HLB of 9.2, was able to reduce the respiration and transpiration rates of strawberries by 17% and 40%, respectively, at 4 °C and relative humidity higher than 86%
Effect of biopolymer active coating on alteration kinetics of minimally processed fennel stored at different temperatures
The effect of an active coating based on sodium caseinate and propyl gallate on the physical and nutritional quality indices changes of minimally processed fennel stored at different temperatures was investigated. Pseudo-zero and pseudo-first-order models well described the quality changes of the product over time, whereas the Arrhenius-type model was used to estimate the activation energy of the alteration processes in the range of temperatures tested. The kinetic constants of the total antioxidant capacity (TAC) and vitamin C loss were reduced by 30% and 20% thanks to the presence of the coating. Whereas for the physical properties, the kinetic constants were not affected. Additionally, the TAC loss of coated samples was less sensitive to temperature change (Ea TAC 113) than the control sample (Ea TAC 130). In conclusion, sodium caseinate coating enriched with propyl gallate can be a technological solution to preserve the nutritional quality of minimally processed fennels
Impact of heat treatments on technological performance of re-milled semolina dough and bread
Re-milled semolina used for bread making is appreciated from consumers for its typical sensory features and nutritional attributes. Fluid bed drying treatment can be applied to semolina to change its bacteriological properties, to prolong shelf life by decreasing the risk of mould development, and to degrade some mycotoxins. The main goal of the present work was to evaluate the impact of heat treatment on structural development of semolina dough during mixing and leavening and on bread characteristics. Semolina was treated with fluidized bed drying at 90°C, 120°C, or 150°C for 5, 15 or 30 min. The heat treatment affected colour, moisture content, and farinograph indices of semolina. Results showed that the use of heat treated re-milled semolina significantly (P <0.05) affected the dough leavening kinetics and bread parameters such as crumb structure and mechanical parameters, in particular for treatment at 150°C for 30 min. On the contrary, after treatment of semolina at 120°C for 30 min, an improvement in the leavening phase of dough and no significant effects on bread quality were observed. Therefore, moderate heat treatment can be applied to semolina without having any negative impact
Active Biopolymer Coating Based on Sodium Caseinate: Physical Characterization and Antioxidant Activity
The objective of this work was to investigate the e�ect of sodium caseinate concentration
on physical-chemical properties of coating solutions and films obtained by casting as a starting
point for the development of an active coating for minimally processed fruits or vegetables. Sodium
caseinate solutions at di�erent concentrations (4%, 8%, 10%, 12%, 14%) were used as a coating system.
The coating viscosity and desorption kinetic were characterized. Minimally processed fennels were
coated by dipping and the liquid and dry coating thickness were estimated by assessing the amount
of coating on fennel during draining as a function of solution properties (concentration and viscosity).
Film obtained by casting were also characterized in terms of equilibrium moisture content, color,
and water vapor permeability. The potential of using the sodium caseinate solution to obtain active
coating was investigated by adding gallic acid or rosemary oil to sodium caseinate solution at 4%.
The antioxidant capacity of the coating was evaluated by DPPH test. Results show that sodium
caseinate solutions follow a Newtonian behavior in the range of concentration investigated and the
viscosity increased as solids concentration increased, following a power law. The drying rate was in
the range 0.0063–0.00107 mgH2O mgsolids
-1 min-1 m-2 as a function of sodium caseinate concentration.
The average liquid and dry coating thickness on fennels were in the range 20–70 and 0.7–6.4 micrometry,
respectively. The water vapor permeability slightly decreased as the solid concentration increased.
Active coating showed good antioxidant properties
Correlation between sensory and instrumental properties of Canestrato Pugliese slices packed in biodegradable films
This paper compares the performance of three novel biodegradable films having different gas and water vapour permeabilities to the performance of a multilayer film made of polyethylene and EVOH and having high barrier properties. As model food C. Pugliese cheese was chosen. The samples were stored for 28 days and, once a week, they were analysed using sensory and instrumental tests. Sensory data showed samples packed in high permeable biodegradable film were different from fresh cut samples after only 7 days of storage, whereas the other biodegradable films having intermediate water vapour permeability allowed the cheese to keep its sensory properties unchanged for 21 days. The only film which maintained the sensory properties of cheese, with except for texture, during all the investigated time, was the high barrier film. The sensory data are confirmed by acceptability scores
Active casein coatings and films for perishable foods: Structural properties and shelf-life extension
There is an urgent need to increase the food supplies to fulfil the demands of future generations as the population of the world is expected to grow beyond 10 billion by 2050. An essential component for ensuring global food security is to reduce food losses during the post-harvest stage. Active edible coatings and films are a promising sustainable preservation technology for shelf-life extension of food products by hindering decay kinetics of minimally processed fruits and vegetables (F&V), by restricting the mass transfer of moisture, aroma, or gases and carrying an active compound, such as an antioxidant or antimicrobial. Active protein-based coatings and films have the potential to extend the shelf-life of food products by decreasing their respiration rates, as they exhibit an excellent gas barrier and good mechanical properties as compared to other biopolymeric packaging. Among protein-based biopolymers, casein and its derivatives as packaging films have been extensively studied due to their low cost, complete biodegradability, and availability. Currently, there is no review study focusing on caseinate-based active coating and film, thus, this review aims to give insights on the composition, rheology, structure, and properties of caseinate-based formulations by critically discussing the results presented in the literature. A methodological approach was followed to obtain relevant literature to discuss the influence of additives on the shelf-life of F&V. Furthermore, changes in secondary structure of casein were observed after incorporation of bioactive compounds (i.e., phenolic acids). Likewise, there is a need to explore chemical interactions among bioactive compounds and biopolymer material by using in silico and laboratory trials as food additives have shown to influence the physicochemical properties of film and shelf-life of food products
Effect of Plasma Activated Water and Sodium Caseinate Based Coating on the Quality of Minimally Processed Cherry Tomatoes During Storage
The objective of the work was to preserve the quality of minimally processed (MP) cherry tomatoes during storage combining plasma activated water (PAW) washing treatment and sodium caseinate (SC) based edible coating by: 1) optimizing the sodium caseinate coating formulation to reduce the respiration rate of the product; 2) assessing the impact of the combination of (PAW) and coating on the quality of the product during shelf life. Cherry tomatoes (Solanum lycopersicum var. cerasiforme) were coated with SC blended with chitosan (CH) (2% CH/ 4% SC) or guar gum (GG) (8% SC/0,2 % GG; 8% SC/0,3 % GG; 8% SC/0,4 % GG)). Respiration rate results showed that SC/CH coating did not affect the respiration rate of MP cherry tomatoes, whereas SC/GG blends at 0.2 % was able to reduce the respiration rate of almost the 50% at 20°C. However, to avoid the surface stickiness, beeswax (BW) has been included to the matrix. PAW and coating preserved the colour of the product and increased the total polyphenol as well as the microbiological quality of the product during storage
- …