Qualitative Assessment of General Aviation Pilots’ Perceptions of Preflight Weather Briefings

Prior to departing on a flight, General Aviation pilots complete a pre-flight planning process to ensure the safety of their flight. One aspect of the pre-flight planning process is obtaining a briefing on the weather conditions that the pilot might encounter along their flight route. Traditionally pilots have utilized a phone-in service run by Flight Services to aid in their assessment of weather conditions. However, research indicates that pilots are increasingly reliant on conducting self- briefing using online resources. The purpose of this study is to determine pilot perceptions of obtaining a phone-in brief in comparison to self-briefing

Sheath parameters for non-Debye plasmas: simulations and arc damage

This paper describes the surface environment of the dense plasma arcs that damage rf accelerators, tokamaks and other high gradient structures. We simulate the dense, non-ideal plasma sheath near a metallic surface using Molecular Dynamics (MD) to evaluate sheaths in the non-Debye region for high density, low temperature plasmas. We use direct two-component MD simulations where the interactions between all electrons and ions are computed explicitly. We find that the non-Debye sheath can be extrapolated from the Debye sheath parameters with small corrections. We find that these parameters are roughly consistent with previous PIC code estimates, pointing to densities in the range $10^{24} - 10^{25}\mathrm{m}^{-3}$. The high surface fields implied by these results could produce field emission that would short the sheath and cause an instability in the time evolution of the arc, and this mechanism could limit the maximum density and surface field in the arc. These results also provide a way of understanding how the "burn voltage" of an arc is generated, and the relation between self sputtering and the burn voltage, while not well understood, seems to be closely correlated. Using these results, and equating surface tension and plasma pressure, it is possible to infer a range of plasma densities and sheath potentials from SEM images of arc damage. We find that the high density plasma these results imply and the level of plasma pressure they would produce is consistent with arc damage on a scale 100 nm or less, in examples where the liquid metal would cool before this structure would be lost. We find that the sub-micron component of arc damage, the burn voltage, and fluctuations in the visible light production of arcs may be the most direct indicators of the parameters of the dense plasma arc, and the most useful diagnostics of the mechanisms limiting gradients in accelerators.Comment: 8 pages, 16 figure

Combinatorial Intracellular Delivery Screening of Anticancer Drugs

Conventional drug solubilization strategies limit the understanding of the full potential of poorly water-soluble drugs during drug screening. Here, we propose a screening approach in which poorly water-soluble drugs are entrapped in poly(2-(methacryloyloxyethyl phosphorylcholine)-poly(2-(diisopropylaminoethyl methacryate) (PMPC–PDPA) polymersomes (POs) to enhance drug solubility and facilitate intracellular delivery. By using a human pediatric glioma cell model, we demonstrated that PMPC–PDPA POs mediated intracellular delivery of cytotoxic and epigenetic drugs by receptor-mediated endocytosis. Additionally, when delivered in combination, drug-loaded PMPC–PDPA POs triggered both an enhanced drug efficacy and synergy compared to that of a conventional combinatorial screening. Hence, our comprehensive synergy analysis illustrates that our screening methodology, in which PMPC–PDPA POs are used for intracellular codelivery of drugs, allows us to identify potent synergistic profiles of anticancer drugs

Hybrid-PIC Computer Simulation of the Plasma and Erosion Processes in Hall Thrusters

HPHall software simulates and tracks the time-dependent evolution of the plasma and erosion processes in the discharge chamber and near-field plume of Hall thrusters. HPHall is an axisymmetric solver that employs a hybrid fluid/particle-in-cell (Hybrid-PIC) numerical approach. HPHall, originally developed by MIT in 1998, was upgraded to HPHall-2 by the Polytechnic University of Madrid in 2006. The Jet Propulsion Laboratory has continued the development of HPHall-2 through upgrades to the physical models employed in the code, and the addition of entirely new ones. Primary among these are the inclusion of a three-region electron mobility model that more accurately depicts the cross-field electron transport, and the development of an erosion sub-model that allows for the tracking of the erosion of the discharge chamber wall. The code is being developed to provide NASA science missions with a predictive tool of Hall thruster performance and lifetime that can be used to validate Hall thrusters for missions

Analysis of Indoor Radon Distribution Within a Room By Means of Computational Fluid Dynamics (CFD) Simulation

Radon gas is recognized by international organizations such as the United States Environmental Protection Agency (US-EPA) as the main contributor of radiation environmental to which human beings are exposed. Therefore, the evaluation of indoor radon concentration is a matter of public interest. The emanation and the income of the gas inside a room will generate a negative impact on the quality of the air when the place is not properly ventilated. Understanding how this gas will be distributed inside the room will allow to predict the spatial and temporal variations of radon levels and identify these parameters will provide important information that researchers can be used for calculate radiation dose exposure. Consequently, this studies can prevent a health risk for the people that live or work within the room. Currently, several researchers use the technique called Computational Fluid Dynamics (CFD) to simulate the distribution of gas radon, making use of the various commercial programs that exist in the market. In this work, three simulations were developed in rooms that have a similar geometry but different dimensions, in order to observe how the gas is distributed inside a closed space and to analyze how this distribution varies when the volume of the place is increased. The results show that as the volume of the site increases the radon is mitigated more rapidly and therefore has lower levels of concentration of this gas, as long as the level of radon emanation is kept constant

Bone mineral density and chronic lung disease mortality: the Rotterdam study

Context: Low bone mineral density (BMD) has been associated with increased all-cause mortality. Cause-specific mortality studies have been controversial. Objective: The aim of the study was to investigate associations between BMD and all-cause mortality and in-depth cause-specific mortality. Design and Setting: We studied two cohorts from the prospective Rotterdam Study (RS), initiated in 1990 (RS-I) and 2000 (RS-II) with average follow-up of 17.1 (RS-I) and 10.2 (RS-II) years until January 2011. Baseline femoral neck BMD was analyzed in SD values. Deaths were classified according to International Classification of Diseases into seven groups: cardiovascular diseases, cancer, infections, external, dementia, chronic lung diseases, and other causes. Gender-stratified Cox and competing-risks models were adjusted for age, body mass index, and smoking. Participants: The study included 5779 subjects from RS-I and 2055 from RS-II. Main Outcome Measurements: We measured all-cause and cause-specific mortality. Results: A significant inverse association between BMD and all-cause mortality was found in males [expressed as hazard ratio (95% confidence interval)]: RS-I, 1.07 (1.01-1.13), P = .020; RS-II, 1.31 (1.12-1.55), P = .001); but it was not found in females: RS-I, 1.05 (0.99-1.11), P = .098; RS-II, 0.91 (0.74-1.12), P = .362. An inverse association with chronic lung disease mortality was found in males [RS-I, 1.75 (1.34-2.29), P < .001; RS-II, 2.15 (1.05-4.42), P = .037] and in RS-I in females [1.72 (1.16-2.57); P = .008], persisting after multiple adjustments and excluding prevalent chronic obstructive pulmonary disease. A positive association between BMD and cancer mortality was detected in females in RS-I [0.89 (0.80-0.99); P = .043]. No association was found with cardiovascular mortality. Conclusions: BMD is inversely associated with mortality. The strong association of BMD with chronic lung disease mortality is a novel finding that needs further analysis to clarify underlying mechanisms

Designing peptide nanoparticles for efficient brain delivery

The targeted delivery of therapeutic compounds to the brain is arguably the most significant open problem in drug delivery today. Nanoparticles (NPs) based on peptides and designed using the emerging principles of molecular engineering show enormous promise in overcoming many of the barriers to brain delivery faced by NPs made of more traditional materials. However, shortcomings in our understanding of peptide self-assembly and blood–brain barrier (BBB) transport mechanisms pose significant obstacles to progress in this area. In this review, we discuss recent work in engineering peptide nanocarriers for the delivery of therapeutic compounds to the brain, from synthesis, to self-assembly, to in vivo studies, as well as discussing in detail the biological hurdles that a nanoparticle must overcome to reach the brain

One-Pot Synthesis of Oxidation-Sensitive Supramolecular Gels and Vesicles

Polypeptide-based nanoparticles offer unique advantages from a nanomedicine perspective such as biocompatibility, biodegradability, and stimuli-responsive properties to (patho)physiological conditions. Conventionally, self-assembled polypeptide nanostructures are prepared by first synthesizing their constituent amphiphilic polypeptides followed by postpolymerization self-assembly. Herein, we describe the one-pot synthesis of oxidation-sensitive supramolecular micelles and vesicles. This was achieved by polymerization-induced self-assembly (PISA) of the N-carboxyanhydride (NCA) precursor of methionine using poly(ethylene oxide) as a stabilizing and hydrophilic block in dimethyl sulfoxide (DMSO). By adjusting the hydrophobic block length and concentration, we obtained a range of morphologies from spherical to wormlike micelles, to vesicles. Remarkably, the secondary structure of polypeptides greatly influenced the final morphology of the assemblies. Surprisingly, wormlike micellar morphologies were obtained for a wide range of methionine block lengths and solid contents, with spherical micelles restricted to very short hydrophobic lengths. Wormlike micelles further assembled into oxidation-sensitive, self-standing gels in the reaction pot. Both vesicles and wormlike micelles obtained using this method demonstrated to degrade under controlled oxidant conditions, which would expand their biomedical applications such as in sustained drug release or as cellular scaffolds in tissue engineering

Analysis and characterization of neutron scattering of a Linear Accelerator (LINAC) on medical applications.

In several theoretical and experimental studies, the topic of the undesirable generation of photoneutrons in rooms where a linear accelerator (LINAC) operates has been discussed. When energies above 10 MeV are used to produce X-rays and give radiotherapy treatment to patients resulting in additional radiation to patients. Accordingly, an analysis and characterization of the neutron scattering distribution on different zones in a treatment room contributes to evaluate the radiological health risk to patients, technical and other workers involved in treatment. For the evaluation, a device developed at the PAD-IFUNAM formed by a CR-39 detector enclosed by two 3mm thick acrylic plates was employed. To avoid environmental contamination, the CR-39 and the acrylics plates are enclosed in a round plastic box. Sixteen of these devices were settled in different places inside the treatment room, where a linear accelerator is used. The results show a significant concentration of neutron scattering in areas near the head of irradiation. The recommendation will be to evaluate the neutron scattering concentration in all rooms that’s operates a LINAC in order to verify the radiological health risk and to mitigate the neutron scattering when concentration levels are to high like those in our case, in order to avoid unnecessary exposition to patients and personnel in general