Glass Microbeads in Analog Models of Thrust Wedges

ABSTRACT Glass microbeads are frequently used in analog physical modeling to simulate weak detachment zones but have been neglected in models of thrust wedges. Microbeads differ from quartz sand in grain shape and in low angle of internal friction. In this study, we compared the structural characteristics of microbeads and sand wedges. To obtain a better picture of their mechanical behavior, we determined the physical and frictional properties of microbeads using polarizing and scanning electron microscopy and ring-shear tests, respectively. We built shortening experiments with different basal frictions and measured the thickness, slope and length of the wedges and also the fault spacings. All the microbeads experiments revealed wedge geometries that were consistent with previous studies that have been performed with sand. However, the deformation features in the microbeads shortened over low to intermediate basal frictions were slightly different. Microbeads produced different fault geometries than sand as well as a different grain flow. In addition, they produced slip on minor faults, which was associated with distributed deformation and gave the microbeads wedges the appearance of disharmonic folds. We concluded that the glass microbeads may be used to simulate relatively competent rocks, like carbonates, which may be characterized by small-scale deformation features

Analog Models of Flanking Structures and a Natural Example in the Quadrilátero Ferrífero, Minas Gerais

ABSTRACT The aim of this study is to present analog models of flanking structures and to analyze the Fábrica Nova synform, Quadrilátero Ferrífero, Minas Gerais, from a geometric point of view. We set up seven models using a linear viscous silicone and produced flanking structures with a shear velocity of 2 cm h-1. At different initial orientations with respect to the shear zone boundary, a rigid cross-cutting element with lubricated boundaries was deformed via sinistral bulk flow at a shear strain of γ = 1.28. The most interesting features of our experiments are the geometries of the different marker lines, which are heterogeneous and resulted from thickening and thinning of the silicone at the cross-cutting element terminations. To compare our analog models and the Fábrica Nova synform, we analyzed the outermost marker line of the analog models and the top surface of the Cauê Formation in the Paleoproterozoic metasediments. The best comparisons between the experiments and the natural example were obtained by our CIS90 model in terms of the flexure shape near the cross-cutting element and the cross-cutting element orientation. Thus, we suggest that the cross-cutting elements in both situations act as obstacles and consequently produce local perturbations in laminar flow

Positive inversion of extensional footwalls in the southern Serra do Espinhaço, Brazil - insights from sandbox laboratory experiments

Analogue experiments were carried out to get insights into the processes governing positive inversion during the foreland propagating thrust tectonics in the southern Serra do Espinhaço, a Brasiliano/Panafrican foldthrust belt in southeast Brazil. In particular, model listric half-grabens were inverted by applying contractional displacement to the footwall blocks. We investigated two different inversion conditions in listric half-grabens: (i) extensional and contractional detachments at the same level and (ii) at different positions. The models revealed that the development of a forward-breaking thrust system occurs in the basin synrift deposits, by contractional translation of the extensional footwall block when the extensional and contractional master faults do not coincide. Our experiments show the tectonic imbrication between basement and synrift sequences which characterizes the southern Serra do Espinhaço, and support the location in the eastern mountain range domain of the Espinhaço rift master fault system, which is not exposed at the surface

Benchmarking analogue models of brittle thrust wedges

We performed a quantitative comparison of brittle thrust wedge experiments to evaluate the variability among analogue models and to appraise the reproducibility and limits of model interpretation. Fifteen analogue modeling laboratories participated in this benchmark initiative. Each laboratory received a shipment of the same type of quartz and corundum sand and all laboratories adhered to a stringent model building protocol and used the same type of foil to cover base and sidewalls of the sandbox. Sieve structure, sifting height, filling rate, and details on off-scraping of excess sand followed prescribed procedures. Our analogue benchmark shows that even for simple plane-strain experiments with prescribed stringent model construction techniques, quantitative model results show variability, most notably for surface slope, thrust spacing and number of forward and backthrusts. One of the sources of the variability in model results is related to slight variations in how sand is deposited in the sandbox. Small changes in sifting height, sifting rate, and scraping will result in slightly heterogeneous material bulk densities, which will affect the mechanical properties of the sand, and will result in lateral and vertical differences in peak and boundary friction angles, as well as cohesion values once the model is constructed. Initial variations in basal friction are inferred to play the most important role in causing model variability. Our comparison shows that the human factor plays a decisive role, and even when one modeler repeats the same experiment, quantitative model results still show variability. Our observations highlight the limits of up-scaling quantitative analogue model results to nature or for making comparisons with numerical models. The frictional behavior of sand is highly sensitive to small variations in material state or experimental set-up, and hence, it will remain difficult to scale quantitative results such as number of thrusts, thrust spacing, and pop-up width from model to nature

Resposta hemática de tilápias-do-nilo alimentadas com dietas suplementadas com colina e submetidas a estímulo por baixa temperatura Hematic response of Nile tilapia fed diets supplemented with choline and submitted to stimulus by low temperature

Esta pesquisa foi realizada com o objetivo de avaliar a resposta hemática de tilápias-do-nilo (Oreochromis niloticus) arraçoadas com dietas suplementadas com colina e submetidas a estímulo por baixa temperatura. O período experimental foi realizado em duas etapas: a primeira, de 109 dias, e a segunda, de 7 dias. Durante a primeira etapa, foram utilizados 192 alevinos com peso médio inicial de 4 g, distribuídos em 32 tanques-rede de 200 L instalados em aquários de mil litros. As rações foram formuladas de modo a apresentar 28,0% de proteína digestível e 3.100,0 kcal ED/kg e mesma concentração de aminoácidos. O delineamento experimental foi inteiramente casualizado com oito tratamentos e quatro repetições. As rações foram suplementadas com colina (cloreto de colina 60,0%), de modo a apresentar 100,0; 200,0; 400,0; 600,0; 800,0; 1.000,0 e 1.200,0 mg/kg de ração, e avaliadas em comparação a uma ração sem suplementação. Após o período de 109 dias, foram efetuadas as análises hematológicas dos peixes. Após as análises, os peixes foram transferidos para a sala de desafio e distribuídos em 24 aquários, onde foram mantidos a 17ºC durante sete dias. Após esse período, foram feitas as mesmas análises do período anterior ao desafio. A suplementação de colina não influenciou a eritropoiese ao estímulo pelo frio. A suplementa��ão dietética de colina não interfere na síntese de eritrócitos e leucócitos e a temperatura de 17,0ºC determina linfopenia e neutrofilia.<br>The aim of this study was to evaluate the hematic response of Nile tilapia (Oreochromis niloticus) fed diets supplemented with choline and submitted to temperature stress. The experimental period was realized in two phases: the first, during 109 days, and the second, for seven days. During the first stage, 192 fingerlings with average initial weight of 4 g were distributed in 32 net cages (200 L) allocated in 1,000-L aquaria. The diets were formulated to present 28% of digestible protein and 3,100 kcal DE/kg and the same concentration of amino acids. It was used a complete random experimental design with eight treatments and four replicates. The diets were choline supplemented (60% choline chloride) in order to present 100.0; 200.0; 400.0; 600.0; 800.0; 1,000.0 and 1,200.0 mg/kg of diet and evaluated by comparing to a non-supplemented diet. After the 109-day period, the hematological analyses of the fish were performed. After these analyzes, fish were transferred to the challenge room, distributed in 24 aquaria, and kept at 17ºC during seven days. After this period, the same analyzes of the period previous to the challenge were done. Choline supplementation did not affected erythropoiesis to stimulus by the cold temperature. Dietary choline supplementation does not affect erythrocyte and leukocyte synthesis and the 17ºC temperature determines lymphopenia and neutrophilia

Immunocompromised patients with acute respiratory distress syndrome : Secondary analysis of the LUNG SAFE database

The aim of this study was to describe data on epidemiology, ventilatory management, and outcome of acute respiratory distress syndrome (ARDS) in immunocompromised patients. Methods: We performed a post hoc analysis on the cohort of immunocompromised patients enrolled in the Large Observational Study to Understand the Global Impact of Severe Acute Respiratory Failure (LUNG SAFE) study. The LUNG SAFE study was an international, prospective study including hypoxemic patients in 459 ICUs from 50 countries across 5 continents. Results: Of 2813 patients with ARDS, 584 (20.8%) were immunocompromised, 38.9% of whom had an unspecified cause. Pneumonia, nonpulmonary sepsis, and noncardiogenic shock were their most common risk factors for ARDS. Hospital mortality was higher in immunocompromised than in immunocompetent patients (52.4% vs 36.2%; p < 0.0001), despite similar severity of ARDS. Decisions regarding limiting life-sustaining measures were significantly more frequent in immunocompromised patients (27.1% vs 18.6%; p < 0.0001). Use of noninvasive ventilation (NIV) as first-line treatment was higher in immunocompromised patients (20.9% vs 15.9%; p = 0.0048), and immunodeficiency remained independently associated with the use of NIV after adjustment for confounders. Forty-eight percent of the patients treated with NIV were intubated, and their mortality was not different from that of the patients invasively ventilated ab initio. Conclusions: Immunosuppression is frequent in patients with ARDS, and infections are the main risk factors for ARDS in these immunocompromised patients. Their management differs from that of immunocompetent patients, particularly the greater use of NIV as first-line ventilation strategy. Compared with immunocompetent subjects, they have higher mortality regardless of ARDS severity as well as a higher frequency of limitation of life-sustaining measures. Nonetheless, nearly half of these patients survive to hospital discharge. Trial registration: ClinicalTrials.gov, NCT02010073. Registered on 12 December 2013