Experimental poisoning by Baccharis megapotamica var. weirii in buffalo

Five male 6-8 month-old Murrah buffalo calves were orally dosed with the fresh aerial parts of Baccharis megapotamica var. weirii at doses of 1, 3, 4, 5 and 10g/kg body weight (bw) (~1-10mg macrocyclic trichothecenes/kg/bw). The B. megapotamica used for the experiment was harvested on a farm where a recent spontaneous outbreak of poisoning caused by such plant had occurred. Clinical signs appeared 4-20 hours and 4 buffaloes died 18-49 hours after the ingestion of the plant. Clinical signs were apathy, anorexia, and watery diarrhea, fever, colic, drooling, muscle tremors, restlessness, laborious breathing and ruminal atony, and dehydration. The most consistent gross findings were restricted to the gastrointestinal (GI) tract consisted of varying degrees of edema and reddening of the mucosa of the forestomach. Histopathological findings consisted of varying degrees of necrosis of the epithelial lining of the forestomach and of lymphocytes within lymphoid organs and aggregates. Fibrin thrombi were consistently found in sub-mucosal vessels of the forestomach and in the lumen of hepatic sinusoids. It is suggested that dehydration, septicemia and disseminated intravascular coagulation participate in the pathogenesis of the intoxication and play a role as a cause of death. A subsample of B. megapotamica var. weirii was frozen-dried and ground and analyzed using UHPLC (Ultra High Performance Liquid Chromatography) with high resolution Time of Flight mass spectrometry and tandem mass spectrometry, it was shown that the plant material contained at least 51 different macrocyclic trichothecenes at a total level of 1.1-1.2mg/g. About 15-20% of the total trichothecenes contents was found to be monosaccharide conjugates, with two thirds of these being glucose conjugates and one third constituted by six aldopentose conjugates (probably xylose), which has never been reported in the literature

Scalable generation of cerebellar neurons from pluripotent stem cells

Human induced pluripotent stem cells (iPSCs) have great potential for disease modeling and provide a valuable source for regenerative approaches. However, generating iPSC-derived models to study brain diseases remains a challenge. In particular, our ability to differentiate cerebellar neurons from pluripotent stem cells is still limited. Recently, we described the long-term culture of cerebellar neuroepithelium formed from human iPSCs, recapitulating the early developmental events of the cerebellum. Additionally, an efficient maturation of replated cerebellar progenitors into distinct types of functional cerebellar neurons was also achieved under defined and feeder-free conditions. However, developing a scalable protocol that allows to produce large numbers of organoids and high yields of mature neurons in a 3D bioreactor culture systems is still a difficult challenge. In this work, we present a new approach for the reproducible and scalable generation of mid-hindbrain organoids under chemically defined conditions by using the novel PBS 0.1 (100 mL) Vertical-Wheel single-use bioreactor. In this system, an efficient cell aggregation with shape and size-controlled aggregates can be obtained, which is important for homogeneous and efficient differentiation. Moreover, a larger amount of iPSC-derived aggregates can be generated without being excessively labour-intensive, achieving 431 ± 53.6 aggregates/mL at 24 hours after seeding. After differentiation, distinct types of cerebellar neurons were generated, including Purkinje cells (Calbindin+), Granule cells (BARHL1+ and Pax6+), Golgi cells (Neurogranin+ and GAD65+), Deep cerebellar nuclei projection neurons (TBR1+) and Non-Golgi-type interneurons (Parvalbumin+ and Calbindin-). These cells show signs of efficient maturation, staining positive for MAP2, and are able to change intracellular Ca2+ concentration following KCl stimulation. In this system, human iPSC-derived organoids are able to mature into different mature cerebellar neurons and to survive for up to 3 months, without replating and co-culture with feeder layers

Cryptococcal Pneumonia and Meningitis in a Horse

AbstractGross and microscopic evidence of Cryptococcus neoformans in the lungs and central nervous system of a mature Thoroughbred horse presenting with granulomatous pneumonia and meningitis has been described in this article

Diabetes as an independent predictor of high atherosclerotic burden assessed by coronary computed tomography angiography: The coronary artery disease equivalent revisited

(1) To study the prevalence and severity of coronary artery disease (CAD) in diabetic patients. (2) To provide a detailed characterization of the coronary atherosclerotic burden, including the localization, degree of stenosis and plaque composition by coronary computed tomography angiography (CCTA). Single center prospective registry including a total of 581 consecutive stable patients (April 2011-March 2012) undergoing CCTA (Dual-source CT) for the evaluation of suspected CAD without previous myocardial infarction or revascularization procedures. Different coronary plaque burden indexes and plaque type and distribution patterns were compared between patients with (n = 85) and without diabetes (n = 496). The prevalence of CAD (any plaque; 74.1 vs. 56 %; p = 0.002) and obstructive CAD (≥50 % stenosis; 31.8 vs. 10.3 %; p<0.001) were significantly higher in diabetic patients. The remaining coronary atherosclerotic burden indexes evaluated (plaque in LM-3v-2v with prox. LAD; SIS; SSS; CT-LeSc) were also significantly higher in diabetic patients. In the per segment analysis, diabetics had a higher percentage of segments with plaque in every vessel (2.6/13.1/7.5/10.5 % for diabetics vs. 1.4/7.1/3.3/4.4 % for nondiabetics for LM, LAD, LCx, RCA respectively; p<0.001 for all) and of both calcified (19.3 vs. 9.2 %, p<0.001) and noncalcified or mixed types (14.4 vs. 7.0 %; p<0.001); the ratio of proximal-to-distal relative plaque distribution (calculated as LM/proximal vs. mid/distal/branches) was lower for diabetics (0.75 vs. 1.04; p = 0.009). Diabetes was an independent predictor of CAD and was also associated with more advanced CAD, evaluated by indexes of coronary atherosclerotic burden. Diabetics had a significantly higher prevalence of plaques in every anatomical subset and for the different plaque composition. In this report, the relative geographic distribution of the plaques within each subgroup, favored a more mid-to-distal localization in the diabetic patients

Potent and Broad-Spectrum Antimicrobial Activity of Analogs from the Scorpion Peptide Stigmurin

Scorpion venom constitutes a rich source of biologically active compounds with high potential for therapeutic and biotechnological applications that can be used as prototypes for the design of new drugs. The aim of this study was to characterize the structural conformation, evaluate the antimicrobial activity, and gain insight into the possible action mechanism underlying it, for two new analog peptides of the scorpion peptide Stigmurin, named StigA25 and StigA31. The amino acid substitutions in the native sequence for lysine residues resulted in peptides with higher positive net charge and hydrophobicity, with an increase in the theoretical helical content. StigA25 and StigA31 showed the capacity to modify their structural conformation according to the environment, and were stable to pH and temperature variation-results similar to the native peptide. Both analog peptides demonstrated broad-spectrum antimicrobial activity in vitro, showing an effect superior to that of the native peptide, being non-hemolytic at the biologically active concentrations. Therefore, this study demonstrates the therapeutic potential of the analog peptides from Stigmurin and the promising approach of rational drug design based on scorpion venom peptide to obtain new anti-infective agents.publishersversionpublishe

Balanços energéticos agropecuários: uma importante ferramenta como indicativo de sustentabilidade de agroecossistemas.

No Brasil, pouca atenção se tem dado às formas e caminhos com que os fluxos energéticos se distribuem nos sistemas produtivos. Na agropecuária, a atenção tem sido voltada a novas fontes de energia (biomassa) ou em tecnologia alternativa, visando a racionalização do uso de energia fóssil ou elétrica. Entretanto, a agricultura tem se desenvolvido baseada fortemente na utilização intensiva de máquinas agrícolas, com conseqüente uso de combustíveis fósseis. Um fator de estrangulamento muito forte no consumo energético geral tem sido a utilização massiva de fertilizantes derivados do petróleo nos agroecossistemas. Estudos de Balanços Energéticos visam determinar os pontos de estrangulamento energético fundamentando a busca por tecnologias poupadoras de energia, especialmente aquelas de origem fóssil (combustível, fertilizante, agrotóxicos, energia despendida na fabricação das máquinas e implementos, etc.). No Brasil, a Região Sul, é onde se encontram vários trabalhos buscando uma agricultura mais auto-sustentável, do ponto de vista da utilização da energia. Em vista da possibilidade de eventuais futuras crises energéticas, o presente trabalho procura analisar o estado-da-arte dos estudos em Balanço Energético, no Brasil e no Mundo, como uma ferramenta de indicação da sustentabilidade dos sistemas agropecuários

Coronary computed tomography angiography-adapted Leaman score as a tool to noninvasively quantify total coronary atherosclerotic burden

To describe a coronary computed tomography angiography (CCTA)-adapted Leaman score (CT-LeSc) as a tool to quantify total coronary atherosclerotic burden with information regarding localization, type of plaque and degree of stenosis and to identify clinical predictors of a high coronary atherosclerotic burden as assessed by the CT-LeSc. Single center prospective registry including a total of 772 consecutive patients undergoing CCTA (Dual-source CT) from April 2011 to March 2012. For the purpose of this study, 581 stable patients referred for suspected coronary artery disease (CAD) without previous myocardial infarction or revascularization procedures were included. Pre-test CAD probability was determined using both the Diamond-Forrester extended CAD consortium method (DF-CAD consortium model) and the Morise score. Cardiovascular risk was assessed with the HeartScore. The cut-off for the 3rd tercile (CT-LeSc ≥8.3) was used to define a population with a high coronary atherosclerotic burden. The median CT-LeSc in this population (n = 581, 8,136 coronary segments evaluated; mean age 57.6 ± 11.1; 55.8 % males; 14.6 % with diabetes) was 2.2 (IQR 0-6.8). In patients with CAD (n = 341), the median CT-LeSc was 5.8 (IQR 3.2-9.6). Among patients with nonobstructive CAD, most were classified in the lowest terciles (T1, 43.0 %; T2, 36.1 %), but 20.9 % were in the highest tercile (T3). The majority of the patients with obstructive CAD were classified in T3 (78.2 %), but 21.8 % had a CT-LeSc in lower terciles (T1 or T2). The independent predictors of a high CT-LeSc were: Male sex (OR 1.73; 95 % CI 1.04-2.90) diabetes (OR 2.91; 95 % CI 1.61-5.23), hypertension (OR 2.54; 95 % CI 1.40-4.63), Morise score ≥16 (OR 1.97; 95 % CI 1.06-3.67) and HeartScore ≥5 (OR 2.42; 95 % CI 1.41-4.14). We described a cardiac CT adapted Leaman score as a tool to quantify total (obstructive and nonobstructive) coronary atherosclerotic burden, reflecting the comprehensive information about localization, degree of stenosis and type of plaque provided by CCTA. Male sex, hypertension, diabetes, a HeartScore ≥5 % and a Morise score ≥16 were associated with a high coronary atherosclerotic burden, as assessed by the CT-LeSc. About one fifth of the patients with nonobstructive CAD had a CT-LeSc in the highest tercile, and this could potentially lead to a reclass

Rotational Surfaces in L3\mathbb{L}^3 and Solutions in the Nonlinear Sigma Model

The Gauss map of non-degenerate surfaces in the three-dimensional Minkowski space are viewed as dynamical fields of the two-dimensional O(2,1) Nonlinear Sigma Model. In this setting, the moduli space of solutions with rotational symmetry is completely determined. Essentially, the solutions are warped products of orbits of the 1-dimensional groups of isometries and elastic curves in either a de Sitter plane, a hyperbolic plane or an anti de Sitter plane. The main tools are the equivalence of the two-dimensional O(2,1) Nonlinear Sigma Model and the Willmore problem, and the description of the surfaces with rotational symmetry. A complete classification of such surfaces is obtained in this paper. Indeed, a huge new family of Lorentzian rotational surfaces with a space-like axis is presented. The description of this new class of surfaces is based on a technique of surgery and a gluing process, which is illustrated by an algorithm.Comment: PACS: 11.10.Lm; 11.10.Ef; 11.15.-q; 11.30.-j; 02.30.-f; 02.40.-k. 45 pages, 11 figure