14,963 research outputs found
Slicing of silicon into sheet material. Silicon sheet growth development for the large area silicon sheet task of the low cost silicon solar array project
Fabrication of a prototype large capacity multiple blade slurry saw is considered. Design of the bladehead which will tension up to 1000 blades, and cut a 45 cm long silicon ingot as large as 12 cm in diameter is given. The large blade tensioning force of 270,000 kg is applied through two bolts acting on a pair of scissor toggles, significantly reducing operator set-up time. Tests with an upside-down cutting technique resulted in 100% wafering yields and the highest wafer accuracy yet experienced with MS slicing. Variations in oil and abrasives resulted only in degraded slicing results. A technique of continuous abrasive slurry separation to remove silicon debris is described
Nonequilibrium Dynamics of Charged Particles in an Electromagnetic Field: Causal and Stable Dynamics from 1/c Expansion of QED
We derive from a microscopic Hamiltonian a set of stochastic equations of
motion for a system of spinless charged particles in an electromagnetic (EM)
field based on a consistent application of a dimensionful 1/c expansion of
quantum electrodynamics (QED). All relativistic corrections up to order 1/c^3
are captured by the dynamics, which includes electrostatic interactions
(Coulomb), magnetostatic backreaction (Biot-Savart), dissipative backreaction
(Abraham-Lorentz) and quantum field fluctuations at zero and finite
temperatures. With self-consistent backreaction of the EM field included we
show that this approach yields causal and runaway-free equations of motion,
provides new insights into charged particle backreaction, and naturally leads
to equations consistent with the (classical) Darwin Hamiltonian and has quantum
operator ordering consistent with the Breit Hamiltonian. To order 1/c^3 the
approach leads to a nonstandard mass renormalization which is associated with
magnetostatic self-interactions, and no cutoff is required to prevent runaways.
Our new results also show that the pathologies of the standard Abraham-Lorentz
equations can be seen as a consequence of applying an inconsistent (i.e.
incomplete, mixed-order) expansion in 1/c, if, from the start, the analysis is
viewed as generating a low-energy effective theory rather than an exact
solution. Finally, we show that the 1/c expansion within a Hamiltonian
framework yields well-behaved noise and dissipation, in addition to the
multiple-particle interactions.Comment: 17 pages, 2 figure
An improved perturbation approach to the 2D Edwards polymer -- corrections to scaling
We present the results of a new perturbation calculation in polymer
statistics which starts from a ground state that already correctly predicts the
long chain length behaviour of the mean square end--to--end distance , namely the solution to the 2~dimensional~(2D) Edwards model.
The thus calculated is shown to be convergent in ,
the number of steps in the chain, in contrast to previous methods which start
from the free random walk solution. This allows us to calculate a new value for
the leading correction--to--scaling exponent~. Writing , where in 2D,
our result shows that . This value is also supported by an
analysis of 2D self--avoiding walks on the {\em continuum}.Comment: 17 Pages of Revtex. No figures. Submitted to J. Phys.
Magnetic control assembly qualification model
Fabrication and testing of the magnetic control assembly (MCA) are summarized. The MCA was designed as an add-on unit for certain existing components of the Nimbus and ERTS attitude control system. The MCA system consists of three orthogonal electromagnets; a magnetometer probe capable of sensing external fields in the X, Y, and Z axes; and the control electronics. An operational description of the system is given along with all major drawings and photographs. Manufacturing and inspection procedures are outlined and a chronological list of events is included with the fabrication summary
Discovery of a Low-mass Companion to a Metal-rich F Star with the MARVELS Pilot Project
We report the discovery of a low-mass companion orbiting the metal-rich, main sequence F star TYC 2949-00557-1 during the Multi-object APO Radial Velocity Exoplanet Large-area Survey (MARVELS) pilot project. The host star has an effective temperature T_(eff) = 6135 ± 40 K, logg = 4.4 ± 0.1, and [Fe/H] = 0.32 ± 0.01, indicating a mass of M_⊙ = 1.25 ± 0.09 M_⊙ and R = 1.15 ± 0.15 R_⊙. The companion has an orbital period of 5.69449 ± 0.00023 days and straddles the hydrogen burning limit with a minimum mass of 64 M_J , and thus may be an example of the rare class of brown dwarfs orbiting at distances comparable to those of "Hot Jupiters." We present relative photometry that demonstrates that the host star is photometrically stable at the few millimagnitude level on time scales of hours to years, and rules out transits for a companion of radius ≳ 0.8 R_J at the 95% confidence level. Tidal analysis of the system suggests that the star and companion are likely in a double synchronous state where both rotational and orbital synchronization have been achieved. This is the first low-mass companion detected with a multi-object, dispersed, fixed-delay interferometer
Energy Conversion Alternatives Study (ECAS), General Electric Phase 1. Volume 2: Advanced Energy Conversion Systems. Part 2: Closed Turbine Cycles
For abstract, see N76-23680
A QTL for osteoporosis detected in an F2 population derived from White Leghorn chicken lines divergently selected for bone index
Osteoporosis, resulting from progressive loss of structural bone during the period of egg-laying in hens, is associated with an increased susceptibility to bone breakage. To study the genetic basis of bone strength, an F cross was produced from lines of hens that had been divergently selected for bone index from a commercial pedigreed White Leghorn population. Quantitative trait loci (QTL) affecting the bone index and component traits of the index (tibiotarsal and humeral strength and keel radiographic density) were mapped using phenotypic data from 372 F individuals in 32 F families. Genotypes for 136 microsatellite markers in 27 linkage groups covering ∼80% of the genome were analysed for association with phenotypes using within-family regression analyses. There was one significant QTL on chromosome 1 for bone index and the component traits of tibiotarsal and humeral breaking strength. Additive effects for tibiotarsal breaking strength represented 34% of the trait standard deviation and 7.6% of the phenotypic variance of the trait. These QTL for bone quality in poultry are directly relevant to commercial populations
Energy Conversion Alternatives Study (ECAS), General Electric Phase 1. Volume 2: Advanced energy conversion systems. Part 3: Direct energy conversion cycles
For abstract, see N76-23680
Acoustic interactions between an altitude test facility and jet engine plumes: Theory and experiments
The overall objective of the described effort was to develop an understanding of the physical mechanisms involved in the flow/acoustic interactions experienced in full-scale altitude engine test facilities. This is done by conducting subscale experiments and through development of a theoretical model. Model cold jet experiments with an axisymmetric convergent nozzle are performed in a test setup that stimulates a supersonic jet exhausting into a cylindrical diffuser. The measured data consist of detailed flow visualization data and acoustic spectra for a free and a ducted plume. It is shown that duct resonance is most likely responsible by theoretical calculations. Theoretical calculations also indicate that the higher discrete tones observed in the measurements are related to the screech phenomena. Limited experiments on the sensitivity of a free 2-D, C-D nozzle to externally imposed sound are also presented. It is shown that a 2-D, C-D nozzle with a cutback is less excitable than a 2-D C-D nozzle with no cutback. At a pressure ratio of 1.5 unsteady separation from the diverging walls of the nozzle is noticed. This separation switches from one wall to the opposite wall thus providing an unsteady deflection of the plume. It is shown that this phenomenon is related to the venting provided by the cutback section
Non-Markovian Dynamics and Entanglement of Two-level Atoms in a Common Field
We derive the stochastic equations and consider the non-Markovian dynamics of
a system of multiple two-level atoms in a common quantum field. We make only
the dipole approximation for the atoms and assume weak atom-field interactions.
From these assumptions we use a combination of non-secular open- and
closed-system perturbation theory, and we abstain from any additional
approximation schemes. These more accurate solutions are necessary to explore
several regimes: in particular, near-resonance dynamics and low-temperature
behavior. In detuned atomic systems, small variations in the system energy
levels engender timescales which, in general, cannot be safely ignored, as
would be the case in the rotating-wave approximation (RWA). More problematic
are the second-order solutions, which, as has been recently pointed out, cannot
be accurately calculated using any second-order perturbative master equation,
whether RWA, Born-Markov, Redfield, etc.. This latter problem, which applies to
all perturbative open-system master equations, has a profound effect upon
calculation of entanglement at low temperatures. We find that even at zero
temperature all initial states will undergo finite-time disentanglement
(sometimes termed "sudden death"), in contrast to previous work. We also use
our solution, without invoking RWA, to characterize the necessary conditions
for Dickie subradiance at finite temperature. We find that the subradiant
states fall into two categories at finite temperature: one that is temperature
independent and one that acquires temperature dependence. With the RWA there is
no temperature dependence in any case.Comment: 17 pages, 13 figures, v2 updated references, v3 clarified results and
corrected renormalization, v4 further clarified results and new Fig. 8-1
- …