1,138 research outputs found
Low cost silicon solar array project. Task 1: Establishment of the feasibility of a process capable of low cost, high volume production of silane, SiH4
The kinetics of the redistribution of dichlorosilane and trichlorosilane vapor over a tertiary amine ion exchange resin catalyst were investigated. The hydrogenation of SiCl4 to form HSiCl3 and the direct synthesis of H2SiCl2 from HCl gas and metallurgical silicon metal were also studied. The purification of SiH4 using activated carbon adsorbent was studied along with a process for storing SiH4 absorbed on carbon. The latter makes possible a higher volumetric efficiency than compressed gas storage. A mini-plant designed to produce ten pounds per day of SiH4 is described
Developing an Older Adult Volunteer Program in a New York Chinese Community: An Evidence-Based Approach
This study reports the results of a pilot volunteer project for older Chinese immigrants and documents benefits for both volunteers and caregiver recipients. Using a social marketing approach, the volunteer project was designed as a social model to promote better health among older Chinese immigrants in New York City. The packaging of this health promotion project as a volunteer program was based on a strengths perspective. In the program, 18 older Chinese immigrants were trained to provide support and referral to family caregivers of ill relatives in the Chinese community. At 6 months, outcomes were evaluated for both volunteers and caregivers. The older volunteers perceived benefits associated with volunteering, specifically, a greater sense of well-being and satisfaction with life. In addition, the majority of volunteers felt empowered by training and volunteering (100 %), felt the skills they learned improved communication with their own families (90 %), and reported physical and emotional health benefits (61 %). At the same time, caregivers reported stress reduction following volunteer support. Findings suggest that a volunteer program model may be an effective health promotion intervention for older Chinese immigrants
TRACE code validation of boiling water reactor spray cooling injection into a SVEA fuel assembly
Best-estimate codes have been developed in the nuclear industry to design and license nuclear power plants to a greater degree of accuracy and safety assurance. Such codes necessitate efforts to qualify their validity, particularly with modeling the complex thermal-hydraulics phenomena associated with Loss-of-Coolant Accident (LOCA) scenarios. Emergency spray cooling injection is a safety feature implemented in many Boiling Water Reactor (BWR) designs to re-flood a reactor during an accident. Significant experimental work has qualified the efficacy of spray cooling, and ongoing computational modeling efforts strive to more accurately portray the phenomena involved. This thesis examines the physical phenomena pertaining to emergency spray cooling injection over SVEA-type fuel assemblies. The US NRC thermal-hydraulics code TRACE version 5.0 Patch 4 has been chosen to simulate the separate-effect tests performed by ASEA-ATOM. The computational model was evaluated by performing forward uncertainty quantification using Dakota as the analysis tool and code driver. 31 parameters were identified in the TRACE model input, 24 of which pertain to the developed input model and 7 of which pertain to the physical constitutive models used in TRACE. The developed model was able to provide a reasonable prediction of the trend of the transient peak cladding temperature. The most influential parameters from the uncertainty quantification model were the countercurrent flow limiting (CCFL) model constant and rod/wall emissivity, emphasizing that detailed understanding of CCFL and an accurately determined radiation model is essential for accurate simulation of emergency BWR spray cooling systems. For the physical model sensitivity coefficients, the TRACE model was particularly sensitive to the dispersed film flow boiling (DFFB) wall-liquid and single-phase wall-vapor heat transfer coefficients which correspond to the flow regime expected at the occurrence of peak cladding temperature in a BWR LOCA reflood scenario with spray cooling present
Charge distribution uncertainty in differential mobility analysis of aerosols
The inference of particle size distributions from differential mobility analyzer (DMA) data requires knowledge of the charge distribution on the particles being measured. The charge distribution produced by a bipolar aerosol charger depends on the properties of the ions produced in the charger, and on the kinetics of charge transfer from molecular ions or ion clusters to the particles. A single parameterization of a theoretically predicted charge distribution is employed in most DMA analyses regardless of the atmospheric conditions being probed. Deviations of the actual charge distribution from that assumed in the data analysis will bias the estimated particle size distribution. We examine these potential biases by modeling measurements and data inversion using charge distributions calculated for a range of atmospheric conditions. Moreover, simulations were performed using the ion-to-particle flux coefficients predicted for a range of properties of both the particles and ions. To probe the biases over the full range of particle sizes, the measurements were simulated through an atmospheric new particle formation event. The differences between the actual charge distribution and that according to the commonly used parametrization resulted in biases as large as a factor of 5 for nucleation-mode particles, and up to 80% for larger particles. Incorrect estimates of the relative permittivity of the particles or not accounting for the temperature and pressure effects for measurements at 10 km altitude produced biases in excess of 50%; three-fold biases result from erroneous estimates of the ion mobility distribution. We further report on the effects of the relative permittivity of the ions, the relative concentrations of negative and positive ions, and truncation of the number of charge states considered in the inversion
Electrochemical kinetics of thin film vanadium pentoxide cathodes for lithium batteries
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2005.Includes bibliographical references (p. 147-154).Electrochemical experiments were performed to investigate the processing-property-performance relations of thin film vanadium pentoxide cathodes used in lithium batteries. Variations in microstructures were achieved via sputtering and anneal treatments, resulting in films with different morphologies, grain size distributions, and orientations. Key findings included (1) grain size distributions largely did not affect the current rate performance of the cathodes. Rather, the film orientation and the ability to undergo rapid phase transformation were more vital to improving performance; (2) interfacial resistance and ohmic polarization were also dominant at the high current rates used (> 600 [mu]A/cm²) in addition to solid diffusion; and (3) optimization of thin film batteries requires that film thickness be 200 [mu]A/cm²).(cont.) An analysis of the wide variation in current-rate performance for different V₂0₅ architectures (including composite, nanofiber, and thin film) shows a convergence in results when the area of active material has been factored into the metric. This convergence suggests that either the reaction rate or interfacial resistance is limiting in V₂0₅ as opposed to diffusion.by Simon C. Mui.Ph.D
Gallium vacancy and the residual acceptor in undoped GaSb studied by positron lifetime spectroscopy and photoluminescence
Positron lifetime, photoluminescence (PL), and Hall measurements were performed to study undoped p-type gallium antimonide materials. A 314 ps positron lifetime component was attributed to Ga vacancy (V Ga) related defect. Isochronal annealing studies showed at 300°C annealing, the 314 ps positron lifetime component and the two observed PL signals (777 and 797 meV) disappeared, which gave clear and strong evidence for their correlation. However, the hole concentration (∼2×10 17cm -3) was observed to be independent of the annealing temperature. Although the residual acceptor is generally related to the V Ga defect, at least for cases with annealing temperatures above 300°C, V Ga is not the acceptor responsible for the p-type conduction. © 2002 American Institute of Physics.published_or_final_versio
Influence of particle-phase state on the hygroscopic behavior of mixed organic-inorganic aerosols
Recent work has demonstrated that organic and mixed organic–inorganic particles can exhibit multiple phase states depending on their chemical composition and on ambient conditions such as relative humidity (RH). To explore the extent to which water uptake varies with particle-phase behavior, hygroscopic growth factors (HGFs) of nine laboratory-generated, organic and organic–inorganic aerosol systems with physical states ranging from well-mixed liquids to phase-separated particles to viscous liquids or semi-solids were measured with the Differential Aerosol Sizing and Hygroscopicity Spectrometer Probe at RH values ranging from 40 to 90%. Water-uptake measurements were accompanied by HGF and RH-dependent thermodynamic equilibrium calculations using the Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients (AIOMFAC) model. In addition, AIOMFAC-predicted growth curves are compared to several simplified HGF modeling approaches: (1) representing particles as ideal, well-mixed liquids; (2) forcing a single phase but accounting for non-ideal interactions through activity coefficient calculations; and (3) a Zdanovskii–Stokes–Robinson-like calculation in which complete separation of the inorganic and organic components is assumed at all RH values, with water uptake treated separately in each of the individual phases. We observed variability in the characteristics of measured hygroscopic growth curves across aerosol systems with differing phase behaviors, with growth curves approaching smoother, more continuous water uptake with decreasing prevalence of liquid–liquid phase separation and increasing oxygen : carbon ratios of the organic aerosol components. We also observed indirect evidence for the dehydration-induced formation of highly viscous semi-solid phases and for kinetic limitations to the crystallization of ammonium sulfate at low RH for sucrose-containing particles. AIOMFAC-predicted growth curves are generally in good agreement with the HGF measurements. The performances of the simplified modeling approaches, however, differ for particles with differing phase states. This suggests that no single simplified modeling approach can be used to capture the water-uptake behavior for the diversity of particle-phase behavior expected in the atmosphere. Errors in HGFs calculated with the simplified models are of sufficient magnitude to produce substantial errors in estimates of particle optical and radiative properties, particularly for the assumption that water uptake is driven by absorptive equilibrium partitioning with ideal particle-phase mixing
Effect of Mucuna pruriens Seed Extract Pretreatment on the Responses of Spontaneously Beating Rat Atria and Aortic Ring to Naja sputatrix (Javan Spitting Cobra) Venom
Mucuna pruriens Linn. (velvet bean) has been used by native Nigerians as a prophylactic for snakebite. Rats pretreated with M. pruriens seed extract (MPE) have been shown to protect against the lethal and cardiovascular depressant effects of Naja sputatrix (Javan spitting cobra) venoms, and the protective effect involved immunological neutralization of the venom toxins. To investigate further the mechanism of the protective effect of MPE pretreatment against cobra venom toxicity, the actions of Naja sputatrix venom on spontaneously beating rat atria and aortic rings isolated from both MPE pretreated and untreated rats were studied. Our results showed that the MPE pretreatment conferred protection against cobra venom-induced depression of atrial contractility and atrial rate in the isolated atrial preparations, but it had no effect on the venom-induced contractile response of aortic ring preparation. These observations suggested that the protective effect of MPE pretreatment against cobra venom toxicity involves a direct protective action of MPE on the heart function, in addition to the known immunological neutralization mechanism, and that the protective effect does not involve action on blood vessel contraction. The results also suggest that M. pruriens seed may contain novel cardioprotective agent with potential therapeutic value
Design, simulation, and characterization of a radial opposed migration ion and aerosol classifier (ROMIAC)
We present the design, simulation, and characterization of the radial opposed migration ion and aerosol classifier (ROMIAC), a compact differential electrical mobility classifier. We evaluate the performance of the ROMIAC using a combination of finite element modeling and experimental validation of two nearly identical instruments using tetra-alkyl ammonium halide mass standards and sodium chloride particles. Mobility and efficiency calibrations were performed over a wide range of particle diameters and flow rates to characterize ROMIAC performance under the range of anticipated operating conditions. The ROMIAC performs as designed, though performance deviates from that predicted using simplistic models of the instrument. The underlying causes of this non-ideal behavior are found through finite element simulations that predict the performance of the ROMIAC with greater accuracy than the simplistic models. It is concluded that analytical performance models based on idealized geometries, flows, and fields should not be relied on to make accurate a priori predictions about instrumental behavior if the actual geometry or fields deviate from the ideal assumptions. However, if such deviations are accurately captured, finite element simulations have the potential to predict instrumental performance. The present prototype of the ROMIAC maintains its resolution over nearly three orders of magnitude in particle mobility, obtaining sub-20 nm particle size distributions in a compact package with relatively low flow rate operation requirements
- …