1,149 research outputs found

    The Measurement of Fuel-Air Ratio by Analysis for the Oxidized Exhaust Gas

    Get PDF
    An investigation was made to determine a method of measuring fuel-air ratio that could be used for test purposes in flight and for checking conventional equipment in the laboratory. Two single-cylinder test engines equipped with typical commercial engine cylinders were used. The fuel-air ratio of the mixture delivered to the engines was determined by direct measurement of the quantity of air and of fuel supplied and also by analysis of the oxidized exhaust gas and of the normal exhaust gas. Five fuels were used: gasoline that complied with Army-Navy fuel Specification No. AN-VV-F-781 and four mixtures of this gasoline with toluene, benzene, and xylene. The method of determining the fuel-air ratio described in this report involves the measurement of the carbon-dioxide content of the oxidized exhaust gas and the use of graphs for the presented equation. This method is considered useful in aircraft, in the field, or in the laboratory for a range of fuel-air ratios from 0.047 to 0.124

    Software Configurable Multichannel Transceiver

    Get PDF
    Emerging test instrumentation and test scenarios increasingly require network communication to manage complexity. Adapting wireless communication infrastructure to accommodate challenging testing needs can benefit from reconfigurable radio technology. A fundamental requirement for a software-definable radio system is independence from carrier frequencies, one of the radio components that to date has seen only limited progress toward programmability. This paper overviews an ongoing project to validate the viability of a promising chipset that performs conversion of radio frequency (RF) signals directly into digital data for the wireless receiver and, for the transmitter, converts digital data into RF signals. The Software Configurable Multichannel Transceiver (SCMT) enables four transmitters and four receivers in a single unit the size of a commodity disk drive, programmable for any frequency band between 1 MHz and 6 GHz

    Frequency Agile Transceiver for Advanced Vehicle Data Links

    Get PDF
    Emerging and next-generation test instrumentation increasingly relies on network communication to manage complex and dynamic test scenarios, particularly for uninhabited autonomous systems. Adapting wireless communication infrastructure to accommodate challenging testing needs can benefit from reconfigurable radio technology. Frequency agility is one characteristic of reconfigurable radios that to date has seen only limited progress toward programmability. This paper overviews an ongoing project to validate a promising chipset that performs conversion of RF signals directly into digital data for the wireless receiver and, for the transmitter, converts digital data into RF signals. The Software Configurable Multichannel Transceiver (SCMT) enables four transmitters and four receivers in a single unit, programmable for any frequency band between 1 MHz and 6 GHz

    The NACA mixture analyzer and its application to mixture-distribution measurement in flight

    Get PDF
    The NACA mixture analyzer was developed as a research instrument for the continuous indication of fuel-air ratios of aircraft engine installations throughout the range of engine operation. It has been evaluated by using it to measure the mixture distribution of a nine-cylinder radial aircraft engine in flight. The mixture distribution among the cylinders in flight was obtained at normal operating conditions for the engine at an altitude of 5000 feet. Some limited data was also obtained at an altitude of 20,000 feet. Results of these flight tests showed that the NACA mixture analyzer is a satisfactory and dependable instrument for continuous indication of the mixture in flight at all engine conditions regardless of altitude and temperature

    Structural and immunochemical characterization of the type VIII group B Streptococcus capsular polysaccharide.

    Get PDF
    The type VIII capsular polysaccharide has been isolated and purified from a newly described strain of group B Streptococcus which is a leading cause of sepsis and neonatal meningitis in Japan. The polysaccharide contains D-glucose, D-galactose, L-rhamnose, and sialic acid in the molar ratio 1:1:1:1. By means of high resolution 1H nuclear magnetic resonance (1H NMR), 13C NMR, and homo- and heterocorrelated NMR, the repeating unit structure of the type VIII polysaccharide was delineated as the following, [formula: see text] Enzymatic studies established this polysaccharide as the first from which sialic acid, linked to a branched beta-D-galactopyranosyl residue, is known to be removed by bacterial neuraminidase
    • …
    corecore