5,908 research outputs found
Biomechanical comparison of the track start and the modified one-handed track start in competitive swimming: an intervention study
This study compared the conventional track and a new one-handed track start in elite age group swimmers to determine if the new technique had biomechanical implications on dive performance. Five male and seven female GB national qualifiers participated (mean ± SD:
age 16.7 ± 1.9 years, stretched stature 1.76 ± 0.8 m, body mass 67.4 ± 7.9 kg) and were assigned to a control group (n = 6) or an intervention group (n = 6) that learned the new onehanded dive technique. All swimmers underwent a 4-week intervention comprising 12 ± 3 thirty-minute training sessions. Video cameras synchronized with an audible signal and timing suite captured temporal and kinematic data. A
portable force plate and load cell handrail mounted to a swim starting block collected force data over 3 trials of each technique. A MANCOVA identified Block Time (BT),
Flight Time (FT), Peak Horizontal Force of the lower limbs (PHF) and Horizontal Velocity at Take-off (Vx) as covariates. During the 10-m swim trial, significant differences were found in Time to 10 m (TT10m), Total Time (TT), Peak Vertical Force (PVF), Flight Distance (FD), and Horizontal Velocity at Take-off (Vx) (p < .05). Results indicated that the conventional track start method was faster over 10 m, and therefore may be seen as a superior start after a short intervention. During training, swimmers and coaches should focus on the most statistically significant dive performance variables: peak horizontal force and velocity at take-off, block and flight time
Keyword-Based Delegable Proofs of Storage
Cloud users (clients) with limited storage capacity at their end can
outsource bulk data to the cloud storage server. A client can later access her
data by downloading the required data files. However, a large fraction of the
data files the client outsources to the server is often archival in nature that
the client uses for backup purposes and accesses less frequently. An untrusted
server can thus delete some of these archival data files in order to save some
space (and allocate the same to other clients) without being detected by the
client (data owner). Proofs of storage enable the client to audit her data
files uploaded to the server in order to ensure the integrity of those files.
In this work, we introduce one type of (selective) proofs of storage that we
call keyword-based delegable proofs of storage, where the client wants to audit
all her data files containing a specific keyword (e.g., "important"). Moreover,
it satisfies the notion of public verifiability where the client can delegate
the auditing task to a third-party auditor who audits the set of files
corresponding to the keyword on behalf of the client. We formally define the
security of a keyword-based delegable proof-of-storage protocol. We construct
such a protocol based on an existing proof-of-storage scheme and analyze the
security of our protocol. We argue that the techniques we use can be applied
atop any existing publicly verifiable proof-of-storage scheme for static data.
Finally, we discuss the efficiency of our construction.Comment: A preliminary version of this work has been published in
International Conference on Information Security Practice and Experience
(ISPEC 2018
An Economic Study of the Effect of Android Platform Fragmentation on Security Updates
Vendors in the Android ecosystem typically customize their devices by
modifying Android Open Source Project (AOSP) code, adding in-house developed
proprietary software, and pre-installing third-party applications. However,
research has documented how various security problems are associated with this
customization process.
We develop a model of the Android ecosystem utilizing the concepts of game
theory and product differentiation to capture the competition involving two
vendors customizing the AOSP platform. We show how the vendors are incentivized
to differentiate their products from AOSP and from each other, and how prices
are shaped through this differentiation process. We also consider two types of
consumers: security-conscious consumers who understand and care about security,
and na\"ive consumers who lack the ability to correctly evaluate security
properties of vendor-supplied Android products or simply ignore security. It is
evident that vendors shirk on security investments in the latter case.
Regulators such as the U.S. Federal Trade Commission have sanctioned Android
vendors for underinvestment in security, but the exact effects of these
sanctions are difficult to disentangle with empirical data. Here, we model the
impact of a regulator-imposed fine that incentivizes vendors to match a minimum
security standard. Interestingly, we show how product prices will decrease for
the same cost of customization in the presence of a fine, or a higher level of
regulator-imposed minimum security.Comment: 22nd International Conference on Financial Cryptography and Data
Security (FC 2018
Profiling The Physiological Parameters of Boxers in The Parachute Regiment. ‘Every Man an Emperor’
This study aimed to collect and identify the physiological parameters that are required to produce winning performances in an army boxing competition. Army boxing competitions are sanctioned and governed by ‘England Boxing’ and consist of three rounds of two minutes with one-minute restorative periods. The Parachute Regiment are an elite infantry fighting force within the British military, with a continued success in the inter-army boxing championships. 22 male participants were recruited (mean ± SD age 28 ± 2 years, stature 178 ± 8.1cm, body mass 79 ± 7.1 kg, BMI 24.9 ±2.5).Body fat %. V̇O₂max, lower limb power, and 1RM max strength test protocols for back squat and bench press were performed. Additionally, impact punch power measured from rear hand cross strikes, and punching velocities were measured using a linear positional transducer. Countermovement (CMJ) and repetitive (n=10) jump data were collected using a jump mat. The physiological parameters in mean scores; body composition showed body fat 11.8±8.1%: CMJ height 35.5±5cm: Repetitive jump 28.5±5.6cm: Wingate peak power (body mass to power ratio) 11.5±1.6W/kg: Wingate average power, 8.1±1.4W/kg: V̇O₂max 53±4.8 ml.kg⁻¹.min⁻¹: Back squat (body mass to weight lifted ratio) 1.95±0.2kg: Bench press 1.1±0.1kg/BW: Rear cross strike velocity 8.47±0.8m/s: Impact power 15227±2250W. Significant relationships were observed between anthropometric data and power, strike velocity and V̇O₂max in addition to relationships being evident between some strength and power variables. by the participants in this study. Although punch impact power is an essential performance indicator in boxing, other physiological factors, such as lower limb power and strength have been demonstrated to attribute to the continued winning performances by 3PARA boxing team
More Discriminants with the Brezing-Weng Method
The Brezing-Weng method is a general framework to generate families of
pairing-friendly elliptic curves. Here, we introduce an improvement which can
be used to generate more curves with larger discriminants. Apart from the
number of curves this yields, it provides an easy way to avoid endomorphism
rings with small class number
On the morphological deviation in additive manufacturing of porous Ti6Al4V scaffold: a design consideration
Additively manufactured Ti scaffolds have been used for bone replacement and orthopaedic applications. In these applications, both morphological and mechanical properties are important for their in vivo performance. Additively manufactured Ti6Al4V triply periodic minimal surface (TPMS) scaffolds with diamond and gyroid structures are known to have high stiffness and high osseointegration properties, respectively. However, morphological deviations between the as-designed and as-built types of these scaffolds have not been studied before. In this study, the morphological and mechanical properties of diamond and gyroid scaffolds at macro and microscales were examined. The results demonstrated that the mean printed strut thickness was greater than the designed target value. For diamond scaffolds, the deviation increased from 7.5 μm (2.5% excess) for vertical struts to 105.4 μm (35.1% excess) for horizontal struts. For the gyroid design, the corresponding deviations were larger, ranging from 12.6 μm (4.2% excess) to 198.6 μm (66.2% excess). The mean printed pore size was less than the designed target value. For diamonds, the deviation of the mean pore size from the designed value increased from 33.1 μm (-3.0% excess) for vertical struts to 92.8 μm (-8.4% excess) for horizontal struts. The corresponding deviation for gyroids was larger, ranging from 23.8 μm (-3.0% excess) to 168.7 μm (-21.1% excess). Compressive Young's modulus of the bulk sample, gyroid and diamond scaffolds was calculated to be 35.8 GPa, 6.81 GPa and 7.59 GPa, respectively, via the global compression method. The corresponding yield strength of the samples was measured to be 1012, 108 and 134 MPa. Average microhardness and Young's modulus from α and β phases of Ti6Al4V from scaffold struts were calculated to be 4.1 GPa and 131 GPa, respectively. The extracted morphology and mechanical properties in this study could help understand the deviation between the as-design and as-built matrices, which could help develop a design compensation strategy before the fabrication of the scaffolds
Anisotropic geometry-conforming d-simplicial meshing via isometric embeddings
We develop a dimension-independent, Delaunay-based anisotropic mesh generation algorithm suitable for integration with adaptive numerical solvers. As such, the mesh produced by our algorithm conforms to an anisotropic metric prescribed by the solver as well as the domain geometry, given as a piecewise smooth complex. Motivated by the work of Lévy and Dassi [10-12,20], we use a discrete manifold embedding algorithm to transform the anisotropic problem to a uniform one. This work differs from previous approaches in several ways. First, the embedding algorithm is driven by a Riemannian metric field instead of the Gauss map, lending itself to general anisotropic mesh generation problems. Second we describe our method for computing restricted Voronoi diagrams in a dimension-independent manner which is used to compute constrained centroidal Voronoi tessellations. In particular, we compute restricted Voronoi simplices using exact arithmetic and use data structures based on convex polytope theory. Finally, since adaptive solvers require geometry-conforming meshes, we offer a Steiner vertex insertion algorithm for ensuring the extracted dual Delaunay triangulation is homeomorphic to the input geometries. The two major contributions of this paper are: a method for isometrically embedding arbitrary mesh-metric pairs in higher dimensional Euclidean spaces and a dimension-independent vertex insertion algorithm for producing geometry-conforming Delaunay meshes. The former is demonstrated on a two-dimensional anisotropic problem whereas the latter is demonstrated on both 3d and 4d problems. Keywords: Anisotropic mesh generation; metric; Nash embedding theorem; isometric; geometry-conforming; restricted Voronoi diagram; constrained centroidal Voronoi tessellation; Steiner vertices; dimension-independen
- …