422 research outputs found
Recommended from our members
Probing the switching mechanism in ZnO nanoparticle memristors
We investigate the resistance switching mechanism in memristors based on colloidal ZnO nanoparticles using electroabsorption (EA) spectroscopy. In this EA experiment, we incorporate a small amount of low-bandgap polymer, poly(9,9-dioctylfluorene-cobenzothiadiazole) (F8BT), as a probe molecule in ZnO-nanoparticle memristors. By characterizing this polymer, we can study the change of built-in potential (VBI) in the device during the resistance switching process without disturbing the resistance state by the EA probe light. Our results show that VBI increases when the device is switched to the high resistance state, suggesting a shift of effective workfunction of the electrode. Thus, we attribute the resistance switching to the field-dependent migration of oxygen vacancies associated with the adsorption and desorption of oxygen molecules at the Al/ZnO interface. This process results in the modulation of the interfacial injection barrier which governs the resistance state of the device.This work was supported by the Engineering and Physical Sciences Research Council [Grant Number EP/G060738/1]Copyright 2014 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. This article "Probing the switching mechanism in ZnO nanoparticle memristors" has been accepted by Journal of Applied Physics. After it is published, it will be found at http://scitation.aip.org/content/aip/journal/ja
Structural relaxations in electronically excited poly(para-phenylene)
Structural relaxations in electronically excited poly(para-phenylene) are
studied using many-body perturbation theory and density-functional-theory
methods. A sophisticated description of the electron-hole interaction is
required to describe the energies of the excitonic states, but we show that the
structural relaxations associated with exciton formation can be obtained quite
accurately within a constrained density-functional-theory approach. We find
that the structural relaxations in the low-energy excitonic states extend over
about 8 monomers, leading to an energy reduction of 0.22 eV and a Stokes shift
of 0.40 eV.Comment: 4 pages, 3 figure
Recommended from our members
A Simple Molecular Design Strategy for Delayed Fluorescence toward 1000 nm.
Harnessing the near-infrared (NIR) region of the electromagnetic spectrum is exceedingly important for photovoltaics, telecommunications, and the biomedical sciences. While thermally activated delayed fluorescent (TADF) materials have attracted much interest due to their intense luminescence and narrow exchange energies (ΔEST), they are still greatly inferior to conventional fluorescent dyes in the NIR, which precludes their application. This is because securing a sufficiently strong donor-acceptor (D-A) interaction for NIR emission alongside the narrow ΔEST required for TADF is highly challenging. Here, we demonstrate that by abandoning the common polydonor model in favor of a D-A dyad structure, a sufficiently strong D-A interaction can be obtained to realize a TADF emitter capable of photoluminescence (PL) close to 1000 nm. Electroluminescence (EL) at a peak wavelength of 904 nm is also reported. This strategy is both conceptually and synthetically simple and offers a new approach to the development of future NIR TADF materials
Recommended from our members
Switching between coherent and incoherent singlet fission via solvent-induced symmetry-breaking.
Singlet fission in organic semiconductors causes a singlet exciton to decay into a pair of triplet excitons and holds potential for increasing the efficiency of photovoltaic devices. In this combined experimental and theoretical study, we reveal that a covalent dimer of the organic semiconductor tetracene undergoes activated singlet fission by qualitatively different mechanisms depending on the solvent environment. We show that intramolecular vibrations are an integral part of this mechanism, giving rise to mixing between charge transfer and triplet pair excitations. Both coherent or incoherent singlet fission can occur, depending on transient solvent-induced energetic proximity between the states, giving rise to complex variation of the singlet fission mechanism and timescale in the different environments. Our results suggest a more general principle for controlling the efficiency of photochemical reactions by utilizing transient interactions to tune the energetics of reactant and product states and switch between incoherent and coherent dynamics.This work was supported by the Engineering and Physical Sciences Research Council, UK (grant numbers EP/L015552/1, EP/M025330/1 and EP/M005143/1). A.M.A. acknowledges the support of the Winton Programme for the Physics of Sustainability. S.L. thanks A*STAR Graduate Scholarship support from A*STAR Singapore. T.J.H.H. acknowledges a Research Fellowship from Jesus College, Cambridge. E.G.F. acknowledges financial support from the National Science Foundation Award No. CHE-1555205. J. W. acknowledges financial support from the MOE Tier 3 programme (MOE2014-T3-1-004)
Pressure Tuning of the Charge Density Wave in the Halogen-Bridged Transition-Metal (MX) Solid
We report the pressure dependence up to 95 kbar of Raman active stretching
modes in the quasi-one-dimensional MX chain solid . The data
indicate that a predicted pressure-induced insulator-to-metal transition does
not occur, but are consistent with the solid undergoing either a
three-dimensional structural distortion, or a transition from a charge-density
wave to another broken-symmetry ground state. We show that such a transition
cacan be well-modeled within a Peierls-Hubbard Hamiltonian. 1993 PACS:
71.30.+h, 71.45.Lr, 75.30.Fv, 78.30.-j, 81.40.VwComment: 4 pages, ReVTeX 3.0, figures available from the authors on request
(Gary Kanner, [email protected]), to be published in Phys Rev B Rapid
Commun, REVISION: minor typos corrected, LA-UR-94-246
The size of electron-hole pairs in pi conjugated systems
We have performed momentum dependent electron energy-loss studies of the
electronic excitations in sexithiophene and compared the results to those from
parent oligomers. Our experiment probes the dynamic structure factor
S(q,omega)and we show that the momentum dependent intensity variation of the
excitations observed can be used to extract the size of the electron-hole pair
created in the excitation process. The extension of the electron-hole pairs
along the molecules is comparable to the length of the molecules and thus maybe
only limited by structural constraints. Consequently, the primary
intramolecular electron-hole pairs are relatively weakly bound. We find no
evidence for the formation of excitations localized on single thiophene units.Comment: RevTex, 3 figures, to appear in Physical Review Letter
Efficiency of radiative emission from thin films of a light-emitting conjugated polymer
J. A. E. Wasey, A. Safonov, I. D. W. Samuel, and William L. Barnes, Physical Review B, Vol. 64, article 205201 (2001). "Copyright © 2001 by the American Physical Society."We examine the efficiency of radiative emission from thin layers of light-emitting conjugated polymers. We compare our experimental results for photoluminescence of the conjugated polymer poly(2-methoxy, 5-(2′-ethyl-hexyloxy) 1,4 phenylenevinylene) (MEH-PPV) with those of a theoretical model, finding good agreement between the two. The specially developed model takes into account several factors including absorption in the emissive layer, a spread of emitter sites within the layer, and the broad emission spectrum of the polymer. We find that the photoluminescence quantum efficiency for radiative emission of a bare MEH-PPV film on a glass substrate is ∼25%. We then apply our model to study electroluminescent devices. We show that for these structures the efficiency of radiative emission is ∼10%. There is thus potential for considerable improvement in efficiency for both systems through recovery of some of the wasted waveguided light. Finally we use our model to reexamine some controversial results that indicate the probability of singlet exciton formation to be 0.4±0.05, and thus greater than the 0.25 expected from spin statistics. Our reanalysis supports a probability >0.25. We conclude by discussing the limitations of present models, including our own, in predicting the performance of realistic light-emitting diodes
Formation of Long-Lived Color Centers for Broadband Visible Light Emission in Low-Dimensional Layered Perovskites.
We investigate the origin of the broadband visible emission in layered hybrid lead-halide perovskites and its connection with structural and photophysical properties. We study ⟨001⟩ oriented thin films of hexylammonium (HA) lead iodide, (C6H16N)2PbI4, and dodecylammonium (DA) lead iodide, (C12H28N)2PbI4, by combining first-principles simulations with time-resolved photoluminescence, steady-state absorption and X-ray diffraction measurements on cooling from 300 to 4 K. Ultrafast transient absorption and photoluminescence measurements are used to track the formation and recombination of emissive states. In addition to the excitonic photoluminescence near the absorption edge, we find a red-shifted, broadband (full-width at half-maximum of about 0.4 eV), emission band below 200 K, similar to emission from ⟨110⟩ oriented bromide 2D perovskites at room temperature. The lifetime of this sub-band-gap emission exceeds that of the excitonic transition by orders of magnitude. We use X-ray diffraction measurements to study the changes in crystal lattice with temperature. We report changes in the octahedral tilt and lattice spacing in both materials, together with a phase change around 200 K in DA2PbI4. DFT simulations of the HA2PbI4 crystal structure indicate that the low-energy emission is due to interstitial iodide and related Frenkel defects. Our results demonstrate that white-light emission is not limited to ⟨110⟩ oriented bromide 2D perovskites but a general property of this class of system, and highlight the importance of defect control for the formation of low-energy emissive sites, which can provide a pathway to design tailored white-light emitters
- …