Updated results on prototype chalcogenide fibers for 10-um wavefront spatial filtering

The detection of terrestrial planets by Darwin/TPF missions will require extremely high quality wavefronts. Single-mode fibers have proven to be powerful beam cleaning components in the near-infrared, but are currently not available in the mid-infrared where they would be critically needed for Darwin/TPF. In this paper, we present updated measurements on the prototype chalcogenide fibers we are developing for the purpose of mid-infrared spatial filtering. We demonstrate the guiding property of our 3rd generation component and we characterize its filtering performances on a 4 mm length: the far-field radiation pattern matches a Gaussian profile at the level of 3% rms and 13% pk-pk.Comment: 4 pages, 5 figures, to appear in the proceedings of the conference "Toward Other Earths, Darwin/TPF and the search for extrasolar terrestrial planets", held in Heidelberg, Germany, 22-25 April 2003, ESA SP-53

Progress towards an accurate determination of the Boltzmann constant by Doppler spectroscopy

In this paper, we present significant progress performed on an experiment dedicated to the determination of the Boltzmann constant, k, by accurately measuring the Doppler absorption profile of a line in a gas of ammonia at thermal equilibrium. This optical method based on the first principles of statistical mechanics is an alternative to the acoustical method which has led to the unique determination of k published by the CODATA with a relative accuracy of 1.7 ppm. We report on the first measurement of the Boltzmann constant by laser spectroscopy with a statistical uncertainty below 10 ppm, more specifically 6.4 ppm. This progress results from improvements in the detection method and in the statistical treatment of the data. In addition, we have recorded the hyperfine structure of the probed saQ(6,3) rovibrational line of ammonia by saturation spectroscopy and thus determine very precisely the induced 4.36 (2) ppm broadening of the absorption linewidth. We also show that, in our well chosen experimental conditions, saturation effects have a negligible impact on the linewidth. Finally, we draw the route to future developments for an absolute determination of with an accuracy of a few ppm.Comment: 22 pages, 11 figure

Measuring the Boltzmann constant by mid-infrared laser spectroscopy of ammonia

We report on our ongoing effort to measure the Boltzmann constant, $k_B,$ using the Doppler broadening technique on ammonia. This paper presents some of the improvements made to the mid-infrared spectrometer including the use of a phase-stabilized quantum cascade laser, a lineshape analysis based on a refined physical model and an improved fitting program 2 increasing the confidence in our estimates of the relevant molecular parameters, and a first evaluation of the saturation parameter and its impact on the measurement of k B. A summary of the systematic effects contributing to the measurement is given and the optimal experimental conditions for mitigating those effects in order to reach a competitive measurement of $k_B$ at a part per million accuracy level are outlined

Preparation and manipulation of molecules for fundamental physics tests

This paper is a chapter from an upcoming book on cold molecule physics. In it we describe techniques for the preparation and manipulation of cold molecules. We further describe techniques for applying said cold molecules to tests of fundamental physics.Comment: 22 pages, 18 figure

Optical fibers with interferometric path length stability by controlled heating for transmission of optical signals and as components in frequency standards

We present a simple method to stabilize the optical path length of an optical fiber to an accuracy of about 1/100 of the laser wavelength. We study the dynamic response of the path length to modulation of an electrically conductive heater layer of the fiber. The path length is measured against the laser wavelength by use of the Pound-Drever-Hall method; negative feedback is applied via the heater. We apply the method in the context of a cryogenic resonator frequency standard.Comment: Expanded introduction and outlook. 9 pages, 5 figure

Low noise amplication of an optically carried microwave signal: application to atom interferometry

In this paper, we report a new scheme to amplify a microwave signal carried on a laser light at $\lambda$=852nm. The amplification is done via a semiconductor tapered amplifier and this scheme is used to drive stimulated Raman transitions in an atom interferometer. Sideband generation in the amplifier, due to self-phase and amplitude modulation, is investigated and characterized. We also demonstrate that the amplifier does not induce any significant phase-noise on the beating signal. Finally, the degradation of the performances of the interferometer due to the amplification process is shown to be negligible

86-km optical link with a resolution of 2.10-18 for RF frequency transfer

RF frequency transfer over an urban 86 km fibre has been demonstrated with a resolution of 2.10-18 at one day measuring time using an optical compensator. This result is obtained with a reference carrier frequency of 1 GHz, and a rapid scrambling of the polarisation state of the input light in order to reduce the sensitivity to the polarisation mode dispersion in the fibre. The limitation due to the fibre chromatic dispersion associated with the laser frequency fluctuations is highlighted and analyzed. A preliminary test of an extended compensated link over 186 km using optical amplifiers gives a resolution below 10-17 at 1 day

Quantum cascade laser frequency stabilisation at the sub-Hz level

Quantum Cascade Lasers (QCL) are increasingly being used to probe the mid-infrared "molecular fingerprint" region. This prompted efforts towards improving their spectral performance, in order to reach ever-higher resolution and precision. Here, we report the stabilisation of a QCL onto an optical frequency comb. We demonstrate a relative stability and accuracy of 2x10-15 and 10-14, respectively. The comb is stabilised to a remote near-infrared ultra-stable laser referenced to frequency primary standards, whose signal is transferred via an optical fibre link. The stability and frequency traceability of our QCL exceed those demonstrated so far by two orders of magnitude. As a demonstration of its capability, we then use it to perform high-resolution molecular spectroscopy. We measure absorption frequencies with an 8x10-13 relative uncertainty. This confirms the potential of this setup for ultra-high precision measurements with molecules, such as our ongoing effort towards testing the parity symmetry by probing chiral species

CXCR6 marks a novel subset of T-bet(lo)Eomes(hi) natural killer cells residing in human liver

This work was funded by a Wellcome Trust Investigator Award to MKM funding KS and LP, MRC Career Development Award to CD, MRC Clinical Research Training Fellowship to DP, Wellcome Trust Henry Dale Fellowship to VM