21,026 research outputs found

    User's manual for MacPASCO

    Get PDF
    A user's manual is presented for MacPASCO, which is an interactive, graphic, preprocessor for panel design. MacPASCO creates input for PASCO, an existing computer code for structural analysis and sizing of longitudinally stiffened composite panels. MacPASCO provides a graphical user interface which simplifies the specification of panel geometry and reduces user input errors. The user draws the initial structural geometry and reduces user input errors. The user draws the initial structural geometry on the computer screen, then uses a combination of graphic and text inputs to: refine the structural geometry; specify information required for analysis such as panel load and boundary conditions; and define design variables and constraints for minimum mass optimization. Only the use of MacPASCO is described, since the use of PASCO has been documented elsewhere

    Highly stable analog-to-digital converter

    Get PDF
    Device has been developed for use in pulse-height analyzer of gamma-ray telescope. Unit shows integral linearity of 0.05 percent and differential linearity of less than 2 percent

    Fault Localization in Multi-Threaded C Programs using Bounded Model Checking (extended version)

    Full text link
    Software debugging is a very time-consuming process, which is even worse for multi-threaded programs, due to the non-deterministic behavior of thread-scheduling algorithms. However, the debugging time may be greatly reduced, if automatic methods are used for localizing faults. In this study, a new method for fault localization, in multi-threaded C programs, is proposed. It transforms a multi-threaded program into a corresponding sequential one and then uses a fault-diagnosis method suitable for this type of program, in order to localize faults. The code transformation is implemented with rules and context switch information from counterexamples, which are typically generated by bounded model checkers. Experimental results show that the proposed method is effective, in such a way that sequential fault-localization methods can be extended to multi-threaded programs.Comment: extended version of paper published at SBESC'1

    Damage-cluster distributions and size effect on strength in compressive failure

    Get PDF
    We investigate compressive failure of heterogeneous materials on the basis of a continuous progressive damage model. The model explicitely accounts for tensile and shear local damage and reproduces the main features of compressive failure of brittle materials like rocks or ice. We show that the size distribution of damage-clusters, as well as the evolution of an order parameter, the size of the largest damage-cluster, argue for a critical interpretation of fracture. The compressive failure strength follows a normal distribution with a very small size effect on the mean strength, in good agreement with experiments

    Evidence for Ubiquitous Collimated Galactic-Scale Outflows along the Star-Forming Sequence at z~0.5

    Full text link
    We present an analysis of the MgII 2796, 2803 and FeII 2586, 2600 absorption line profiles in individual spectra of 105 galaxies at 0.3<z<1.4. The galaxies, drawn from redshift surveys of the GOODS fields and the Extended Groth Strip, fully sample the range in star formation rates (SFRs) occupied by the star-forming sequence with stellar masses log M_*/M_sun > 9.5 at 0.3<z<0.7. Using the Doppler shifts of the MgII and FeII absorption lines as tracers of cool gas kinematics, we detect large-scale winds in 66+/-5% of the galaxies. HST/ACS imaging and our spectral analysis indicate that the outflow detection rate depends primarily on galaxy orientation: winds are detected in ~89% of galaxies having inclinations (i) <30 degrees (face-on), while the wind detection rate is only ~45% in objects having i>50 degrees (edge-on). Combined with the comparatively weak dependence of the wind detection rate on intrinsic galaxy properties, this suggests that biconical outflows are ubiquitous in normal, star-forming galaxies at z~0.5. We find that the wind velocity is correlated with host galaxy M_* at 3.4-sigma significance, while the equivalent width of the flow is correlated with host galaxy SFR at 3.5-sigma significance, suggesting that hosts with higher SFR may launch more material into outflows and/or generate a larger velocity spread for the absorbing clouds. Assuming that the gas is launched into dark matter halos with simple, isothermal density profiles, the wind velocities measured for the bulk of the cool material (~200-400 km/s) are sufficient to enable escape from the halo potentials only for the lowest-M_* systems in the sample. However, the outflows typically carry sufficient energy to reach distances of >50 kpc, and may therefore be a viable source of cool material for the massive circumgalactic medium observed around bright galaxies at z~0. [abridged]Comment: Submitted to ApJ. 61 pages, 25 figures, 4 tables, 4 appendices. Uses emulateapj forma

    First fringes with an integrated-optics beam combiner at 10 um - A new step towards instrument miniaturization for mid-infrared interferometry

    Full text link
    Observations at mas-resolution scales and high dynamic range hold a central place in achieving, for instance, the spectroscopic characterization of exo-Earths or the detailed mapping of their protoplanetary disc birthplace. Ground or space-based multi-aperture infrared interferometry is a promising technique to tackle these goals. But significant efforts still need to be undertaken to achieve a simplification of these instruments if we want to combine the light from a large number of telescopes. Integrated-optics appears as an alternative to the current conventional designs, especially if its use can be extended to a higher number of astronomical bands. This article reports for the first time the experimental demonstration of the feasibility of an integrated-optics approach to mid-infrared beam combination for single-mode stellar interferometry. We have fabricated a 2-telescope beam combiner prototype integrated on a substrate of chalcogenide glasses, a material transparent from 1 to 14 um. We have developed laboratory tools to characterize the modal properties and the interferometric capabilities of our device. We obtain fringes at 10 um and measure a mean contrast V=0.981 \pm 0.001 with high repeatability over one week and high stability over 5h. We show experimentally - as well as on the basis of modeling considerations - that the component has a single-mode behavior at this wavelength, which is essential to achieve high-accuracy interferometry. From previous studies, the propagation losses are estimated to 0.5 dB/cm for such components. We also discuss possible issues that may impact the interferometric contrast. The IO beam combiner performs well at 10. We also anticipate the requirement of a better matching between the numerical apertures of the component and the (de)coupling optics to optimize the total throughput. The next step foreseen is the achievement of wide-band interferograms.Comment: Accepted in A&A; 7 pages; 7 figure

    Scalable simultaneous multi-qubit readout with 99.99% single-shot fidelity

    Full text link
    We describe single-shot readout of a trapped-ion multi-qubit register using space and time-resolved camera detection. For a single qubit we measure 0.9(3)x10^{-4} readout error in 400us exposure time, limited by the qubit's decay lifetime. For a four-qubit register (a "qunybble") we measure an additional error of only 0.1(1)x10^{-4} per qubit, despite the presence of 4% optical cross-talk between neighbouring qubits. A study of the cross-talk indicates that the method would scale with negligible loss of fidelity to ~10000 qubits at a density <~1 qubit/um^2, with a readout time ~1us/qubit.Comment: 4 pages, 3 figures; simulations added to fig.3, with some further text and figure revisions. Main results unchanged

    The Impact of Office Automation on the Organization: Some Implications for Research and Practice

    Get PDF
    Computer technology has recently been applied to the automation of office tasks and procedures. Much of the technology is aimed not at improving the efficiency of current office procedures, but at altering the nature of office work altogether. The development of automated office systems raises a number of issues for the organization. How will this technology be received by organization members? How will it affect the definition of traditional office work? What will be its impact on individuals, work groups, and the structure of the organization? This paper presents a descriptive model and propositions concerning the potential impacts of office automation on the organization and it stresses the need, when implementing automated office systems, to take a broad perspective of their potential positive and negative effects on the organization. The need for further research examining the potential effects of office automation is emphasized.Information Systems Working Papers Serie

    Reduction in jejunal fluid absorption in vivo through distension and cholinergic stimulation not attributable to enterocyte secretion

    Get PDF
    Jejunal fluid absorption in vivo was reduced by distension and by hydrostatic pressure and further declined on adding E. coli STa enterotoxin but no net fluid secretion was detected. Luminal atropine reduced pressure mediated reductions in fluid absorption to normal values but intravenous hexamethonium was without effect. A neural component to inhibition of absorption by pressure (though not stretch) may be mediated by axon reflexes within cholinergic neurons.Perfusion of cholinergic compounds also reduced net fluid absorption but did not cause secretion. In order to show that these actions were not secretory processes stimulated by cholinergic compounds that offset normal rates of absorption, these compounds were tested for their ability to cause net secretion in loops that were perfused with solutions in which choline substituted for sodium ion. In addition, these perfusates additionally contained E. coli STa enterotoxin or EIPA (ethyl-isopropyl-amiloride) to minimize absorption.In these circumstances, where it might be expected to do so if it were acting through a secretory rather than an absorptive mechanism, carbachol did not cause net fluid secretion. Cholinergic stimulation and pressure induced distension are thought to reduce net fluid absorption through inducing secretion but are found only to reduce fluid absorption.In conclusion, distension and cholinergic stimulation of the small intestine are two further circumstances in which fluid secretion is assumed to explain their action on fluid movement, as required by the enterocyte secretion model of secretion but, which like STa enterotoxin, instead are only able to reduce fluid absorption. This casts further doubt on the widespread validity of the enterocyte secretion model for fluid appearance in the lumen in diarrhoeal diseases
    • …
    corecore