3,981 research outputs found
The design and development of transonic multistage compressors
The development of the transonic multistage compressor is reviewed. Changing trends in design and performance parameters are noted. These changes are related to advances in compressor aerodynamics, computational fluid mechanics and other enabling technologies. The parameters normally given to the designer and those that need to be established during the design process are identified. Criteria and procedures used in the selection of these parameters are presented. The selection of tip speed, aerodynamic loading, flowpath geometry, incidence and deviation angles, blade/vane geometry, blade/vane solidity, stage reaction, aerodynamic blockage, inlet flow per unit annulus area, stage/overall velocity ratio, and aerodynamic losses are considered. Trends in these parameters both spanwise and axially through the machine are highlighted. The effects of flow mixing and methods for accounting for the mixing in the design process are discussed
Stalled and stall-free performance of axial-flow compressor stage with three inlet-guide-vane and stator-blade settings
The performance of the first stage of a transonic, multistage compressor was mapped over a range of inlet-guide-vane and stator-blade settings. Both stall-free and deep-stall performance data were obtained. For the settings tested, as stall was encountered and flow was further reduced, a relatively sharp drop in pressure ratio occurred and was followed by a continuing but more gradual reduction in pressure ratio with reduced flow. The position of the stall line on the map of pressure ratio against equivalent weight flow was essentially unaffected over the range of inlet-guide-vane and stator-blade settings
Performance of inlet stage of transonic compressor
The overall and blade-element performances are presented over the stable flow operating range of the stage at the design tip speed of 426 m/sec. Stage peak efficiency of 0.83 was obtained at a weight flow of 28.8 kg/sec and a pressure ratio of 1.52. The stall margin for the stage was 8 percent based on weight flow and pressure ratio at peak efficiency and stall. The rotor appears to be stalling prematurely as evidenced by high rotor tip losses
Quantum-measurement backaction from a Bose-Einstein condensate coupled to a mechanical oscillator
We study theoretically the dynamics of a hybrid optomechanical system consisting of a macroscopic mechanical membrane magnetically coupled to a spinor Bose-Einstein condensate via a nanomagnet attached at the membrane center. We demonstrate that this coupling permits us to monitor indirectly the center-of-mass position of the membrane via measurements of the spin of the condensed atoms. These measurements normally induce a significant backaction on the membrane motion, which we quantify for the cases of thermal and coherent initial states of the membrane. We discuss the possibility of measuring this quantum backaction via repeated measurements. We also investigate the potential to generate nonclassical states of the membrane, in particular Schrödinger-cat states, via such repeated measurements
USE OF PLASTIC DRIFT CARDS AS INDICATORS OF POSSIBLE DISPERSAL OF PROPAGULES OF THE MANGROVE AVICENNIA MARINA BY OCEAN CURRENTS
Plastic drift cards with the same buoyancy as propagules of Avicennia marina (Forssk.) Vierh. were used as an indicator of possible mangrove dispersal by ocean currents. The cards were dropped from an aircraft into the sea at the mouths of the Mhlathuze River off Richards Bay, the Mgeni River off Durban and the Nxaxo-Ngqusi rivers off Wavecrest on the east coast of South Africa. Details of the time and locality of strandings were recorded from cards returned. Of the 4 500 cards released, 133 (8.9%), 146 (9.7%) and 280 (18.7%) were returned respectively from the above locations. The high returns from Wavecrest were attributable to cards being washed ashore in the immediate vicinity of the dropping point. A high percentage of the cards dropped at Durban were transported northwards by the inshore counter-current. Approximately 68 and 32% of the cards recovered for Richards Bay and Durban respectively were transported by the Agulhas Current and were stranded farther south along the East and South-East coasts. Cards that reached the Agulhas mixing area were deposited ashore on the Cape Peninsula and the West Coast (3%), or were transported either across the Atlantic Ocean to South America or the Indian Ocean to Australasia (4%). Estimated transport rates of cards to South America and Australasia were similar to previously published values. The results indicate that the northern estuaries could provide propagative material over a considerable portion of the South African coast, which could result in a wider distribution of mangroves in the Eastern Cape.Afr. J. mar. Sci. 25: 169–17
Quantum measurement backaction from a BEC coupled to a mechanical oscillator
We study theoretically the dynamics of a a hybrid optomechanical system
consisting of a macroscopic mechanical membrane magnetically coupled to a
spinor Bose-Einstein condensate via a nanomagnet attached at the membrane
center. We demonstrate that this coupling permits us to monitor indirectly the
center-of-mass position of the membrane via measurements of the spin of the
condensed atoms. These measurements normally induce a significant backaction on
the membrane motion, which we quantify for the cases of thermal and coherent
initial states of the membrane. We discuss the possibility of measuring that
quantum backaction via repeated measurements. We also investigate the potential
to generate non-classical states of the membrane, in particular Schrodinger cat
states, via such repeated measurements.Comment: 14 pages, 4 figures. Submitted to PR
Mechanically Detecting and Avoiding the Quantum Fluctuations of a Microwave Field
During the theoretical investigation of the ultimate sensitivity of
gravitational wave detectors through the 1970's and '80's, it was debated
whether quantum fluctuations of the light field used for detection, also known
as photon shot noise, would ultimately produce a force noise which would
disturb the detector and limit the sensitivity. Carlton Caves famously answered
this question with "They do." With this understanding came ideas how to avoid
this limitation by giving up complete knowledge of the detector's motion. In
these back-action evading (BAE) or quantum non-demolition (QND) schemes, one
manipulates the required quantum measurement back-action by placing it into a
component of the motion which is unobserved and dynamically isolated. Using a
superconducting, electro-mechanical device, we realize a sensitive measurement
of a single motional quadrature with imprecision below the zero-point
fluctuations of motion, detect both the classical and quantum measurement
back-action, and demonstrate BAE avoiding the quantum back-action from the
microwave photons by 9 dB. Further improvements of these techniques are
expected to provide a practical route to manipulate and prepare a squeezed
state of motion with mechanical fluctuations below the quantum zero-point
level, which is of interest both fundamentally and for the detection of very
weak forces
Optomechanical backaction-evading measurement without parametric instability
We review a scheme for performing a backaction-evading measurement of one mechanical quadrature in an optomechanical setup. The experimental application of this scheme has been limited by parametric instabilities caused in general by a slight dependence of the mechanical frequency on the electromagnetic energy in the cavity. We find that a simple modification to the optical drive can effectively eliminate the parametric instability even at high intracavity power, allowing realistic devices to achieve sub-zero-point uncertainties in the measured quadrature
- …